Blog

Audi's CES interior concept foretells a screen-filled A8

Audi is once again offering a glimpse into its future interior-design plans at CES. The new setup is called Virtual Dashboard and is both an extension and an evolution of Virtual Cockpit, which made its debut in Vegas two years ago before winding up in the TT. While this interior mockup is pulled from Audi's recent E-Tron Quattro concept, our man on the ground at CES was told this is "very close" to the interior we'll see in the next Audi A8, which is due in a year or so. Virtual Dashboard is screen-heavy in stark contrast to Virtual Cockpit's single, driver-focussed gauge display. It keeps that and adds a pair of screens to the mix, all of them using OLED (organic light-emitting diode) tech. The central screen measures 14.1 inches diagonally and is curved with a rhomboid border; its AMOLED (active matrix organic light-emitting diode) allows for the irregular shape and curvature. Below that sits a more normal, rectangular screen; both are very well integrated into their surroundings. And as in many current Audis, the shift lever acts as a comfy wrist rest. On the top screen, drivers and passengers get what Audi calls classic information – navigation, audio, settings. The lower screen provides big favorite buttons and also houses on-screen buttons for the climate control. When it's called for, the lower display turns into an input tablet for handwritten entries, an evolution of the small separate touchpad offered in current Audis. The displays use swiping and other gestures familiar to smartphone users, which allow them to interact with each other, for example when swiping to accept a call and move its info to the gauge display. The screens provide haptic feedback that goes beyond what automakers are offering today. Our man at CES says button presses only result from deliberate presses of the screen, meaning you can rest a finger over your selection and it won't activate until you press, just like a real button. Novel. The steering-wheel controls also provide haptic feedback and have been simplified compared to what's on Virtual Cockpit today. When it hits production in the A8 and other vehicles, all of this will be built on the next generation of Audi's infotainment platform, which it's creatively calling MIB2+. It offers more computing power than the current MIB2 system, allowing it to run more displays and offer more connected services over an LTE connection.

Hands-on with BMW's Open Mobility Cloud at CES

BMW had a bevy of cutting-edge technology ready for the 2016 Consumer Electronics Show that ran the gamut from a laser headlight for motorcycles to replacing the mirrors on an i8 with rear-facing cameras. The German automaker's most potentially life-changing (or most creepy, depending on your attitude) concept was the Open Mobility Cloud that aimed to connect the vehicle with a person's daily agenda, sort of like the way many folks use their smartphones. The tech includes a sci-fi piece of furniture called the Mobility Mirror that looks straight out of Star Trek. The pane of glass displays everywhere a person needs to go during the day, offers appointment reminders, and tracks vehicle charging. It even sends an autonomous car out of the garage when the owner picks up the key to leave the house. Get a better look at this cutting-edge connection between the home and the automobile from Autoblog editor-in-chief Michael Austin, direct from CES.

Flyin' Miata is building a V8-powered MX-5 ND

It's cold in many parts of the country, but this V8-swapped 2016 Mazda MX-5 Miata that Flyin' Miata is developing has us dreaming about throwing on a parka and taking a very brisk drive. This beast is the product of the talented folks at Flyin' Miata, but we can't get too excited just yet. According to the company's brief Facebook post, this is just a dummy V8, placed under the Miata's hood to confirm fit. Judging by the photo, the engine fits like a glove. "There's still a long way to go before this is a real thing," Flyin' Miata writes, but the company admits everything looks "very promising" so far. The post doesn't mention any details about the estimated specs, but Autoblog reached out to Flyin' Miata for more information about this intriguing build. Keith Tanner, one of the mad scientists who shoehorns V8s into Miatas at the Colorado outfit, told us that Flyin' Miata is looking at both the LS3, which will provide between 430 and 525 hp, and the LT1 which is 460 hp out of the box. A supercharged LT4 is also being considered, but as Tanner put it, "that might be a little nuts" in a car as light as the ND. In any of these engine configurations, Tanner estimates the V8-swapped ND should comfortably be a sub-4 second to 60 mph car. The transmission will be a Tremec T56 Magnum six-speed manual. The suspension, brakes, fuel system, cooling system, and the chassis itself will all be beefed up to handle the power, as per normal FM practice. The one question mark is the rear end, as the ND's existing one simply won't be up to the task of putting that much horsepower to the ground. The 2016 Miata was one of the best cars we drove in 2015, but Flyin' Miata knows how to turn a standard MX-5 into an absolute hotrod with the company's LS3 V8 conversions for earlier models. Imagining the more modern chassis from the latest generation with a massive dollop of more power is an exciting thought. We can't wait to see how this project turns out. Related Video:

Kia's Detroit concept is called Telluride

Remember that Kia concept we told you about earlier this week? It's called Telluride – you know, like the ski resort town in Colorado. Kia just released this second teaser image of its big SUV concept, giving us a sneak peek of the interior. Design-wise, it looks cool, but there's more here than meets the eye. Kia is, as expected, short on details. But the automaker confirms many of the interior bits – including elements of the dashboard, door panels, and steering wheel – use 3D-printed components. We'll have to wait until next week's Detroit Auto Show to see exactly what Kia's talking about, though. In its short press release, Kia once again mentions its concept's "unique in-cabin health-and-wellness technology," but doesn't offer any more details. Maybe it's something similar to the Fit Driver stuff that Audi unveiled at CES this week. Look for the Telluride to debut during Kia's press conference at 2:15 PM Eastern on Monday, January 11, and click here to see the original teaser showing the SUV's shape. DETROIT CONCEPT TEASER #2 The boldly designed Telluride, set to unveil at the 2016 North American International Auto Show next week, pushes the boundaries of technology and luxury with unique in-cabin health-and-wellness technology. The concept highlights Kia's first use of 3D-printed components, which add a distinct, modern design element to the dashboard, door panels, and steering wheel.

Hyundai i20 Sport previews future N Division hot hatches

Hyundai is in the process of launching its own performance sub-brand that, eventually, will yield its own line of hot hatches. But while we wait for those to arrive, the Korean automaker has given us a little taste of what's to come with the i20 Sport you see here. Launched exclusively in Germany (where Hyundai Motorsport is based), the Hyundai i20 Sport is based on the Korean automaker's Ford Fiesta and Volkswagen Polo rival – and the basis for its World Rally Championship contender. The new Sport variant is more of a warmed-over job than an outright hot hatch, but it's not without its share of performance enhancements. The suspension is lowered and mounted to 18-inch OZ wheels. It features a new aero kit, though you might have missed it given the attention-grabbing (but optional) graphics. And the engine – while just a modest 1.0-liter turbocharged inline-three – produces a not inconsequential 120 horsepower. That's fairly competitive for an engine that size... especially when you can row the most out of it with a six-speed manual like the one fitted to the i20 Sport. Those specs are a promising harbinger of things to come. Hyundai's N division has already recruited top talent from BMW M GmbH, shown us where its heart is at with the N 2025 Vision Gran Turismo concept, and promoted itself through the company's WRC effort. We're looking forward to seeing how the i20 N (or whatever it's called) will shape up, but in the meantime the Sport model you see here gives us an idea of what it will look like. Related Video: Featured Gallery Hyundai i20 Sport News Source: Hyundai Hyundai Hatchback Performance hyundai i20

2017 Mitsubishi Outlander PHEV will debut in New York

Mitsubishi is betting big on crossovers and EVs, and some promising stuff is in store for the end of this decade. But in the very near future, the first product in Mitsubishi's EV/CUV strategy will launch in the US: the 2017 Outlander PHEV will finally bow at the New York Auto Show in March. I say "finally" because Mitsubishi already offers a plug-in Outlander in other markets, and overseas the PHEV crossover is off to a great start. Mitsubishi is seeing "great success in Europe," according to Ken Konieczka, the company's VP of sales operations. And when the Outlander PHEV launches in the US later this year, Konieczka thinks it'll attract a lot of new buyers to the Mitsubishi brand. I got to see the 2017 Outlander PHEV at a small event in Detroit on Thursday. It's the only one in the country, and still has to undergo some more testing and development before the CUV ready for the spotlight. Perhaps that's why Mitsubishi parked it in a dark corner of Detroit's Garden Theater. Compared to the regular Outlander you see pictured here, the PHEV doesn't look all that different save some badges on the tailgate and front fenders and, of course, the charging port. But that's not all Mitsubishi has in store for New York. The Mirage G4 sedan will also bow at that show, after its Canadian introduction at the Toronto Auto Show in February. Like the Outlander PHEV, the Mirage G4 already exists in other markets, and Mitsubishi says it has the largest interior volume of any sedan in its class. More information about both models – including pricing and specifications – will be available when both cars hit the Javits Center stage in March.

America gets its first McLaren P1 GTR

McLaren won't be making a lot of P1 GTRs. Only 35, to be precise. And most of them will likely remain under the company's care, to be transported to specially organized track days. That means you're not likely to see many of them here in the United States, but one fortunate customer recently took delivery of one such track-bound supercar in Northern California. Decked out in a shade of British Racing Green so deep it looks almost black, with trim in McLaren's signature shade of orange, this particular McLaren P1 GTR was captured while being offloaded from a truck in San Jose a little over a week ago. Given the location, we'd imagine the vehicle belongs to some Silicon Valley billionaire – which only makes sense, considering that it costs a good $3 million or so. But the location also means local fans should soon see it lapping around Sonoma Raceway and Laguna Seca in due course. The GTR is the track-focused counterpart to the road-going P1. It packs the same 3.8-liter twin-turbo V8 hybrid powertrain as the P1, but tuned to deliver nearly 1,000 horsepower, unburdened of excess weight, and fitted with equipment designed specifically for the racing circuit. Like the LaFerrari-based FXX K and the Aston Martin Vulcan, it's designed neither for the road nor for any racing series, but just as a plaything that the uber-wealthy can toy around with on track days. With production of the P1 now complete, the craftsmen at the McLaren Production Centre in Woking are building the last few GTRs before the Ultimate Series of which this car is part closes its books. Related Video:

Mitsubishi looks to crossovers and EVs for US success

Say what you will about Mitsubishi, but the Japanese automaker is slowly seeing a resurgence here in the United States. December 2015 marked the company's twenty-second consecutive month of year-over-year sales increases, and looking at last year as a whole, Mitsubishi's sales were up 23 percent over 2014. Ken Konieczka, Mitsubishi's vice president of sales operations, says that in order to stay successful, the company will bet big on crossovers and electric vehicles in the coming years. And that means a relatively aggressive product plan here in the US. First up, a brand-new CUV will launch in early 2018, previewed by the eX Concept that debuted at last year's Tokyo Motor Show (pictured). Konieczka says Mitsubishi is making room for this new crossover in its lineup – the Outlander will slowly get bigger, and the Outlander Sport will get smaller. The production version of the eX will slot between those two. Speaking of the Outlander siblings, both will be replaced in the next five years. A new, larger Outlander will arrive in 2019, and the smaller Outlander Sport will arrive in 2020. To fulfill the electric side of the business, Konieczka confirms the next Outlander Sport will sprout an EV variant, and the Outlander plug-in hybrid will launch in the United States later in 2016, as a 2017 model. As for the rest of the company's portfolio, Mitsubishi will offer the updated Mirage hatchback and new G4 sedan later this year. The future for the Lancer, however, looks grim. Konieczka says Mitsubishi still can't find an OEM partner to help create and produce a new Lancer, and our gut says the compact sedan will be phased out in the very near future. "We made a lot of mistakes," Konieczka admits, saying Mitsubishi was "spread too thin [and] had too many models" in the past. This new, more focused approach on EVs and crossovers certainly sounds promising, and will hopefully help Mitsubishi continue its slow growth here in the US market. Still, we won't know for sure until the new products actually reach showrooms. But for now, at least, things are steadily on the rise.

No one wants to buy Mitsubishi's only US plant

Mitsubishi Motors will very likely close its factory in Normal, IL, later this year after failing to find another company in the auto market to take over its only manufacturing site in the US. "We have given up looking for an automaker to buy the plant, but we are looking for possible buyers from other industries," a Mitsubishi spokesperson told Reuters. Mitsubishi announced plans to leave the site in 2015 to shift its business strategy toward Asia. The factory started as a joint venture with Chrysler in 1988 and was the only plant from a Japanese automaker in the US with a UAW-represented workforce. This was allegedly a sticking point when finding a buyer because other companies in the industry didn't want to take on the union employees' contract. The Normal factory ended assembly of the Outlander Sport in November 2015 and laid off 1,000 workers at that time. The site will continue to make car parts until May, and then Mitsubishi will let go of the remaining 250 employees. The costs of shutting down the factory could be as high as 30 billion yen ($255 million), but a company spokesperson wouldn't confirm that figure to Reuters. Mitsubishi's fortunes seem on the upswing in the US as of late. The company's deliveries jumped 22.8 percent in 2015 to a total of 95,342 vehicles, and the last fiscal year brought the automaker's first operating profit in this region in seven years. Related Video:

Here are some of the worst things we saw at CES

The word innovation implies something new and exciting. That's just as true for automobiles as it is for smartphones and computers. After all, who doesn't want to live in a world where the brightest minds are constantly pushing the boundaries of what's possible, seeking to make our lives better through science? To boldly go where no man has gone before? While it's true that innovation is mostly a good thing, history has proven that mankind's brightest ideas can sometimes turn into dim bulbs practically overnight. Ever heard of the Foot-o-scope? That device allowed people to get the best possible fit for a new pair of shoes, which is great. But the machines emitted horrendous amounts of radiation in the process of offering x-ray views of the feet of its victims, which is not great. While we're not going to suggest that anything we've seen at the 2016 Consumer Electronics Show in Las Vegas is as bad as a shoe-fitting fluoroscope, walking the seemingly endless halls at CES has taught us that an interesting lesson is just as true today as it was 100 years ago: Not all innovations are really all that... well, innovative. In fact, some of them are downright terrible. Check out the video above for a rundown of four terrible innovations from the 2016 CES Show. Feel free to share your thoughts about what we've chosen, or submit your own nominees for terrible tech, in the Comments. Weird Car News CES Kia Technology Videos Original Video CES 2016

It's possible to go 111 miles on electricity in the new Chevy Volt

Wayne Gerdes at CleanMPG put the 2016 Chevrolet Volt in Premiere trim through a few closely watched on-the-road tests over a few days. One of them was a run from full charge to EV-only exhaustion, and at the end of the trip Gerdes had traveled 111.0 indicated miles on a single charge, 111.9 according to his Garmin. What's the catch? He guessed his average speed was about 20 miles per hour, which was 15 and 20 mph around town and "a few miles" at 50 mph on the highway. The EPA says the new Volt should go 53 miles on battery power. In the 2011 Volt, rated at 38 electric miles, Gerdes got 75.5 miles on a charge. The upshot is that at urban driving at average speeds should get drivers the EPA rated 53 e-mpg without fuss. He wasn't so impressed with performance in Charge Sustaining Mode, though. During one run that covered 101.2 actual miles in CSM, using 1.691 gallons, the Volt got 59.8 mpg. Speaking of driving in CSM only, Gerdes said it's less efficient here than in competitors from Toyota, Honda, and Hyundai, but that's one of the few performance-related complaints he had. Elsewhere around the PHEV, Gerdes liked improvements to the eight-inch display and rear-view camera, build and design quality, the much quieter ride, and the switch to regular fuel. The six-foot Gerdes found the cabin space still cozy, especially in the back where ingress and egress could be a challenge for people of a certain stature. He lamented the fact that he couldn't find instantaneous fuel and energy consumption or among the many readouts, and would prefer the sedan kicked into glide mode sooner. In spite of that, he declares the Volt II "a full blown electric car." Head over to CleanMPG for the rest of his assessment.

Aston Martin DB11 spied in production sheetmetal

Aston Martin has taken yet another step toward debuting its long-awaited replacement for the DB9, the DB11, ditching the heavy, obstructive plastic cladding for production sheetmetal and stick-on camouflage. The move gives us our best look yet at the automaker's next volume grand tourer. Opinions on whether or not this new car gets its inspiration from the DB10 featured in the James Bond film Spectre are divided. From what we can tell, the profiles are virtually identical between the cinematic machine and this DB11 mule, and it looks like the DB10's thin taillights sit in larger cutouts below a similarly shaped trunk lid. The DB11 does look to get some kind of spoiler, though, and it may even be a pop-up item, neither of which were featured on the Bond car. The biggest differences between the movie coupe and the road car are found on the front end. The headlights are certainly larger and have had their shape tweaked. They now run further up into the fenders, giving just a hint of Ferrari F12. Even so, they're still unmistakably Aston Martin units. That's also true of the grille, which ditches the concept-spec single element on the DB10 for a more conventional upper and lower unit. We have no explanation for one element, though. Look closely at the C-pillar, and you'll notice what looks almost like some kind of vent. Our spies argue that it's an aerodynamic item, like you'd see on the C-pillar of a BMW i8, but we aren't sure. Were it a pure aero aid, we'd expect to be able to see through the other side, like you can with the i8 or something like an Air Curtain. Instead, it could be some kind of air intake for cooling. That's just conjecture, but it's not unreasonable. But what's under the hood? Our spies did some digging and doubt that it's Aston's traditional 6.0-liter V12. Instead, registration data for the prototype shown above lists its engine displacement at 5.2 liters, with our spies claiming forced induction will be used. It's not clear if this engine is a product of of Aston's relationship with Mercedes-AMG – the only V12 you'll get from the Germans is a 6.0-liter twin-turbo, while it also sells a 5.5-liter, twin-turbo V8 – but it seems like a possibility. Check out the spy shots up at the top of the page for the full battery of spy images. Related Video:

Bugatti teases Chiron again, shows and tells us nothing

The television spots Infiniti released in the eighties for the original Q45 still carry the torch for arcane teaser commercials, but Bugatti might try to steal some of that light this year. The Franco-German automaker released a 41-second teaser video for the Chiron with quick-cut shots of just about everything except the supercar. The fighter jet, the volcano, even the guy running on top of the sideways skyscraper we get, since the tagline is "Breaking new dimensions." But the elevator and the drummer? We already know the rumor that it's going to break the Veyron Super Sport's terminal velocity, hitting something above 290 miles per hour. Continuing the theme of tweaks that advance the entire package, it's been reported that an analog speedometer will keep track of that vitesse with hash marks running all the way to 500 kilometers per hour, taking the place of the centrally-placed tachometer. Cabin ergonomics should take a step up, while a larger windshield will improve visibility, and the seating position moves outward to become more conventional. Oh, and since the car is named after French auto racer Louis Chiron and not the mythological Greek centaur, it is pronounced Shir-on, not Kai-ron. You can check out the latest teaser in the video above - at 41 seconds, the spot is about a second less than the time it took the standard Veyron to hit its top speed. Related Video:

Bentley targets audiophiles with custom Continental at CES

Bentley brought a unique version of its Continental GT V8 S to CES this year, packing a unique sound system crafted by the audio trendsetters at Monster. And with it, Bentley's Mulliner customization department outfitted the luxury status symbol in singular style. The Monster by Mulliner features 16 speakers and 3,400 watts of aural stimulation for an in-car audio system not offered for production. In addition to the surround sound system, Mulliner decked the Conti out in Onyx black with red accents and gloss black wheels hiding red brake calipers. The interior features a custom 3D laser-etched dashboard panel and piano black trim as well as specific embroidery and tread plates. It even has a pair of 24-karat gold wireless headphones housed in a special compartment inside. The result is a decidedly different take on the ubiquitous luxury car than the stone veneer panels that Mulliner most recently announced. Bentley suggests in the statement below that the Monster by Mulliner will be offered as a limited edition, "designed to appeal to young professional athletes and musicians." It's certainly not for the timid, but we wouldn't be surprised to see them popping up in music videos and the parking lots outside stadiums in the near future. Related Video: BENTLEY AND MONSTER DEBUT "MONSTER BY MULLINER" CONTINENTAL GT V8 S FEATURING PURE MONSTER SOUND AT CES 2016 IN LAS VEGAS - Handcrafted by Bentley's Mulliner Division and inspired by Monster - Spectacular limited production vehicle designed to appeal to young professional athletes and musicians (Crewe / Las Vegas, NV, January 6 2016) Monster, the world leader in high-performance audio, has teamed up with Bentley Motors' bespoke coach-building division, Mulliner, to create a stunning and uniquely Monster-inspired "Monster by Mulliner," which makes its debut at CES 2016. The show-stopping Bentley Continental GT V8 S, which reflects Monster's attitude of "Always Lead, Never Follow," is designed to appeal to the target market of young professionals and movers and shakers in sports and music. The "Monster by Mulliner" Continental GT V8 S is a bespoke vehicle that will inspire those who want a ride with a bold look and incredible audio performance designed by Monster. Monster's latest innovations in audio technology bring the power of today's music into this Bentley's luxurious cabin.

Aston Martin Rapide puts the future on display at CES

Aston Martin looks to be on the verge of a technological revolution. That includes a new platform, powertrain, design language... the works. And at CES, it's showing how its next generation of vehicles will incorporate new infotainment technologies, as well. Stemming from a partnership recently signed with Chinese company Letv (which we're not sure how to pronounce either), this Aston Martin Rapide S is decked out with bright tech. It has a 13.3-inch high-def touchscreen display in the center console, a 12.2-inch display in the instrument cluster, new speed-recognition technology, and remote services. All the features come from Letv's Internet of the Vehicle program. Few of these features are ground-breaking, but everything being relative, it's a big step for Aston Martin. After all, the British automaker makes almost all of its models based on a platform that dates back fifteen years, a V12 engine that's even older, and no transmission with more than a single clutch. But that's all about to change with a new generation on the horizon, and this demonstrator hints at just one way in which we'll soon see that transformation take shape. Related Video: LETV AND ASTON MARTIN REVEAL THE AUTOLINK RAPIDE S AT CES 6 January 2016, Las Vegas USA: Leading global technology company Letv and luxury sports car brand Aston Martin today revealed at the Consumer Electronics Show the first results of their collaboration – an Aston Martin Rapide S incorporating the latest Letv Internet of the Vehicle (IOV) system. Aston Martin and Letv signed a memorandum of understanding (MOU) on December 3rd 2015 to confirm research projects that include the development of connected electric vehicles through to manufacturing consultation on future electric vehicles. The ideation and engineering of the Aston Martin Rapide S project has been led by the Letv IOV team and has focused on a new concept for the centre console and instrument panel. The center console is now a 13.3 inch HD touch screen and the instrument panel is now a 12.2 inch screen incorporating electronic instrumentation and gauges. The original human-machine interaction (HMI) has also been updated by integrating Letvs latest speech recognition technology. Letv first showed its Autolink system in November 2015, the first time the technology company had released a product specifically developed for automotive applications.

2016 Technology of the Year Finalist: Smart CrossConnect App

One of the most common car-tech-related questions we hear is, "Why can't I just have my phone hooked up in the car?" Indeed, everything we need lives on our smartphones – phonebook contacts, navigation, audio files, etc. And while systems like Android Auto and Apple CarPlay work to bring a sort of mirroring functionality into the car, Smart offers a solution that allows you to, quite literally, just use your phone. It's called the CrossConnect App, available on the new-for-2016 Smart ForTwo. The car comes with a docking port that plugs into the radio head unit, which holds your phone in place, horizontally. From there, you run the app like you would any other, and it lets you work through your phone's existing information to use things like a media player, Bluetooth calling, navigation, and more. The app is free for Android and Apple users. It's a little clunky sometimes, but we like the ability to just use the existing functionality of your phone right there in the car's center console.

Chevy Bolt to start at $37,500 before rebates

During the recent debut at the Consumer Electronics Show, Chevrolet only described the 2017 Bolt's cost as "affordable" without any further explanation. Now the company's promo site for the EV spilled the beans of the $37,500 price after destination. That means some buyers could get the five-door hatch for $30,000 after the $7,500 federal tax credit – at least as long as that lasts for the Bowtie brand. State incentives might also reduce the bill even more when the Bolt arrives in late 2016. Chevy wants the Bolt to be a mainstream and affordable vehicle that can attract a wide swath of buyers. The company estimates the five-door's range at over 200 miles, which should be plenty for most customers. The promo site also touts that the batteries can recharge in nine hours from the automaker's 240-volt home charger. Inside, buyers find a high-tech cabin with a customizable 10.2-inch infotainment screen and an 8-inch instrument display. To limit range anxiety, the vehicle's computers can take into account the way an owner drives, the weather, terrain, and more to calculate just how much distance remains from the batteries. The system also pushes people to be greener drivers through a game-like interface that offers rewards and rankings. If $37,500 or less for this five-door EV intrigues you, read our Quick Spin of a preproduction example from CES for a better idea of what the Bolt is really like. The powertrain's regenerative braking impressed us even over the short driving course, and the infotainment system seemed incredibly useful. Related Video:

2017 GMC Acadia coming to Detroit Auto Show

Well, it's about time. If there's one group of vehicles that are in serious need of an update, it's the GM Lambda crossovers. You know, the Chevy Traverse, GMC Acadia, and Buick Enclave. They're super old. Good thing, then, that the brand-new Acadia is coming to the Detroit Auto Show next week, as evidenced by this teaser image found on the company's Facebook page. There's not much to see here, except for an LED taillamp signature on what appears to be a much cleaner rear end. We expect the three-row CUV to feature all of the latest GM tech, including a robust infotainment system with Android Auto and Apple CarPlay. V6 power and optional all-wheel drive makes sense here, too, though we won't rule out some kind of four-cylinder option. When GM launched the Lambda crossovers, the Acadia arrived first in late 2006, alongside the now-discontinued (but still very much present in the current Acadia) Saturn Outlook. The Buick Enclave came next, and the Chevy Traverse arrived after that. It's unclear if GM will stick with this rollout plan, of course, but one thing's for sure: all-new versions of these CUVs cannot come soon enough. Related Video:

Oh look, it's the 2017 Lincoln Continental

Sorry about the super-low-res photo, but what you're looking at here is the 2017 Lincoln Continental ahead of its official debut at the Detroit Auto Show next week. The image appeared online courtesy of Ford Inside News, showing the production version of Lincoln's new 400-horsepower sedan. The front fascia certainly looks different than the gussied-up concept we first saw in New York last year, but as the Ford forum suggests, this could just be a lower-spec model. Seems weird to us that Lincoln would introduce some snazzy, full-LED headlights and then just slap projector beam units on the actual production car. But you never know. We'll know for sure when the car is revealed at Cobo Hall next week. Expect it to have all-wheel drive with the company's new 400-hp, 3.0-liter twin-turbo V6 (that debuted in the MKZ in Los Angeles). Let us know what you think of the production-spec Conti, in Comments. Related Video:

Honda worker dies in forklift accident at Ohio R&D complex

Ghouse Gulam, a contract worker at the Honda R&D Americas complex in Raymond, OH, died January 4 after being hit by a forklift and suffering a skull fracture. Union County Sheriff's Office Lieutenant Michael Justice tells Autoblog that this is still an open investigation, but there are no pending charges. He said it could be about three months for the authorities to make a final determination until the coroner's report is complete. According to Automotive News, the accident happened between two buildings on the site's campus, and the forklift was carrying an empty trash bin when it struck Gulam. A media release (as a PDF) from the Union County Sheriff's Office showed that police responded at 6:01 AM. Justice would not reveal the name of the driver, but said that the person had retained legal council. The US Occupational Safety and Health Administration also opened an investigation, according to AN. In a statement (in full below), Honda expressed sympathy to Gulam's family. "Associates of Honda R&D Americas are deeply saddened and extend heartfelt sympathy and condolences to family members, friends and colleagues." On Monday, January 4, 2016, at approximately 6:00 a.m. Ghouse Gulam, a contract worker at Honda R&D Americas, Inc. in Raymond, Ohio, was injured in an accident involving a forklift driven by another contract worker. On-site emergency personnel responded immediately to the incident, followed by emergency responders from the Raymond, Ohio based Liberty Township Fire Department. Mr. Gulam was transported by Liberty Township Fire to Memorial Hospital of Union County where he later passed away. Mr. Gulam, 61, was a resident of Livonia, Michigan. Local law enforcement officials were notified of the incident. With respect for the privacy of Mr. Gulam and his family, no additional details will be provided. Associates of Honda R&D Americas are deeply saddened and extend heartfelt sympathy and condolences to family members, friends and colleagues.

Honda, GM supposedly working together on PHEVs, autonomous cars

Back in 2013, Honda and General Motors announced that they would work together on hydrogen fuel cell vehicles (pictured). The stated goal was to develop "commercially feasible fuel cell and hydrogen storage" for around 2020, but there was no discussion at the time that any actual H2 vehicles would come out of the program. Things are evolving with that partnership, maybe. There are rumors circling this week that the two automakers are now working together on plug-in hybrid vehicle technology and autonomous technology. The supposed new facet to the GM-Honda partnership doesn't just focus on a powertrain, reports The Yomiuri Shinbun, but also in getting suppliers to lower prices because now you have two automakers ordering parts together. Building plug-in hybrids and fuel cell cars together might be a thing, too, Yomiuri says. The 2013 hydrogen partnership was made between two leaders in the field (the announcement press release talks says, "GM and Honda rank No. 1 and No. 2, respectively, in total fuel cell patents filed between 2002 and 2012." But if these new rumors are true, then it's more of a bit of catch up for Honda (which had a great but unsuccessful car in the Accord PHEV) while GM gets more tech to better challenge Toyota. That's how the Yomiuri presents it, anyway. A Honda spokesperson told AutoblogGreen that, "Honda and GM's collaboration in the co-development of next generation fuel cell systems is making good progress. Engineers are discussing how we might expand the relationship utilizing each other's strengths, but there is no fixed plan regarding specific areas or timing." News Source: Yomiuri Shinbun via Inside EVs Green Rumormill GM Honda Hydrogen Cars PHEV partnership

Hyundai releases more Ioniq images, hybrid powertrain details

It doesn't look like Hyundai is tiring of releasing teasers for its upcoming Ioniq electrified vehicle. It's already released three batches of 'em, and now here's more – plus powertrain details. The vehicle pairs a 1.6-liter version of the company's Kappa engine – boasting thermal efficiency of 40 percent and good for 104 horsepower to an electric motor making another 43 hp. It's juiced by a lithium-ion polymer battery pack and transmitted by a new six-speed dual-clutch transmission. Hyundai promises the Ioniq will be more engaging to drive than its rivals. It's designed around a lightweight chassis with 53 percent high-strength steel. Non-structural body panels made of aluminum trim nearly 30 pounds off the curb weight. The South Korean automaker has also placed the batteries low in the body to drop the center of gravity and forward to optimize handling along with the multi-link rear suspension. For those who haven't been following the story, the Ioniq will be Korea's challenger to the likes of the Chevy Volt, Toyota Prius, and Nissan Leaf. Instead of offering one or two forms of electric propulsion, the Ioniq will offer three: gasoline-electric hybrid, plug-in hybrid, or full EV. More images and details are sure to follow as Hyundai prepares to introduce the new model later this month back home in Korea. After that, we should be seeing it at the Geneva Motor Show in March. IONIQ: A Leap Forward for Hybrid Vehicles - Hyundai Motor reveals technical innovations underpinning its evolved hybrid system - Lightweight, high-strength architecture delivers a fun, responsive drive - Next generation drivetrain efficiencies achieve class-leading fuel economy - Electric, plug-in hybrid and hybrid powertrains available in a single body type, a world first January 7, 2015 – Following its unveiling to domestic media at Hyundai Motor's Namyang R&D Center in South Korea, details have been confirmed of the IONIQ - the next generation of hybrid vehicles. Rag Jung, Head of Project Management Division at Hyundai Motor R&D Center said, "IONIQ embodies Hyundai Motor's new thinking and bold ambitions for the future. This world-class dedicated hybrid will be the starting point of our future mobility." Lightweight engineering from a dedicated design Built on a chassis created specifically to carry the world's first choice of three efficient and ultra-low emission powertrains, the IONIQ boasts 53% Advanced High Strength Steel combined cleverly with lightweight aluminum.

Is this designer sitting in Alfa Romeo's new SUV?

Well, well, well, what have we here? A picture of Lorenzo Ramaciotti, that's what. It was posted by Ralph Gilles on Instagram. But what's more interesting is what Ramaciotti is sitting in. And it appears to be a new crossover from Alfa Romeo. For those unfamiliar, Lorenzo Ramaciotti is one of the foremost designers in the Italian automotive industry. He served as head of Pininfarina until 2005, and in 2007 was named chief designer for the Fiat group. That's put him in charge of styling more Ferraris, Maseratis, Alfas, and others than we could name. But at nearly 68 years old, he's now preparing to retire, handing the reins to the design of everything that Fiat Chrysler Automobiles makes to his American counterpart Ralph Gilles. Gilles paid tribute to Ramaciotti with this photo and statement posted on Instagram. It shows the veteran designer sitting in the back of what looks to be an SUV. The thing is, though, that it doesn't look like any SUV or crossover we've seen to date. Judging from what we can see of the dashboard design – more angular and modern than rounded and retro – and given who's sitting in the back, we're likely looking at either an Alfa Romeo or a Maserati. Both are working on launching their first crossovers, but the similarity of the dashboard and center-stack design to that of the new Giulia suggests this is probably an Alfa. Whatever it is, it appears to have a rather tall but narrow tailgate, with a flat load floor extended by a fold-down rear bench. If Ramaciotti has done half the job with this crossover as he did with hits like the Ferrari 360 Modena or the Alfa 4C, we're sure it will be a stylish affair inside and out. We'll have to hold on to see how it pans out, but judging from the apparent level of completion of the product pictured, it shouldn't be long now. I have got to dedicate my year and this era of my career to one of my true Heroes, design Legend (& very soft spoken) Lorenzo Ramaciotti. Many of you may not have heard of him but have likely loved the cars he has had his hands in. Mr. Ramaciotti has had one of the most illustrious careers an automobile designer can have. Having led one of Italy's most famous design houses, #Pininfarina for 17 years and contributed there for an incredibly prolific 33 years. He came out of retirement in 2007 to lead Fiat design. In 2009 I met him as my colleague, global boss and most importantly a true mentor.

The Chevy Cruze Hatchback arrives in the US this fall

We knew this was coming, but now it's official. Chevrolet will sell a five-door Cruze in the US beginning in late 2016, and here it is, ahead of its debut at the 2016 Detroit Auto Show. Previously, the Cruze Hatchback was available in other markets, and the decision to not offer it Stateside was apparently "a pre-bankruptcy planning mistake," according to GM's Mark Reuss in earlier reports. The 2017 Cruze Hatchback builds on the second-generation Cruze we saw last summer, adding a wealth of functionality – there's 42 cubic feet of cargo space available with the rear seats folded. Plus, the Cruze sedan is lighter and stiffer than its predecessor – more than 200 pounds have been shaved off the compact car's curb weight. While the Cruze sedan is available in four trims – L, LS, LT, and Premier – the five-door will only be available in LT and Premier guise, but can be had with the optional RS appearance package. All Cruze models are powered by a 1.4-liter turbocharged inline-four engine, with 153 horsepower and 177 pound-feet of torque. Standard amenities include Apple CarPlay and Android Auto via Chevy's MyLink infotainment system, as well as a raft of high-tech safety features. Pricing information isn't available as of this writing, though we expect the Cruze Hatchback to command a slightly higher premium than the sedan. For comparison, a new Cruze LT sedan starts at $21,995, with the Premier coming in at $23,995. We'll have official numbers closer to the Hatchback's on-sale date this fall. Chevrolet Introduces 2017 Cruze Hatch HERE'S THE STORY Ahead of its debut at the North American International Auto Show, Chevrolet today introduced the 2017 Cruze Hatchback. Developed with all the technologies and dynamic driving attributes of the all-new 2016 Cruze sedan, the new hatch adds a functional and sporty choice for customers. It joins Colorado and Trax as the latest Chevrolets to push into new segments. PRODUCT DETAILS The Cruze Hatch has the same, class-leading 106.3-inch (2,700 mm) wheelbase as sedan models, but features a unique roof and rear-end structure – including wraparound taillamps and an integrated spoiler at the top of the liftgate. It opens to offer 18.5 cubic feet (524 liters) of cargo space behind the rear seat. With the rear seat folded, cargo space expands to 42 cubic feet (1,189 liters).

Control your Audi with your Apple TV, if you want to

Not to dash your hopes right up top, but this isn't a way to remotely drive an R8 from the comfort of your living room, or even summon it from the garage. Also, you'll need the new fourth-generation Apple TV (and a real TV hooked up to it) as well as a 2017 A4 or Q7. What Audi is offering is basically a version of the Audi MMI connect app distilled for the streaming media box. Things you can do include locking and unlocking the car, setting it to heat up or cool down before you hop in, and viewing the status of the car. (No screenshot was available from Audi, so you're looking at the iPhone version of the app up top. Just imagine it larger and more horizontal.) Who's it for? People who have the latest Apple TV, a new Audi, and would rather control the latter with the former on a big screen than a smartphone. In other words, we're not sure. We do wager that there's a decent amount of overlap between Audi drivers and tech early adopters, so someone will get excited by this. And since the new Apple TV is based on iOS, it probably wasn't too tough to port the iPhone version of the app over. Like a lot of what we're seeing at CES this week, this is likely a small step in the direction of increasing connectivity between all of the digital stuff in our lives and our cars. We'll get more excited when the family flatscreen turns into a live window of what your car is looking at. But also terrified.

Jeep celebrates with 75th anniversary editions [w/video]

Jeep is celebrating its 75th anniversary this year. That's one heck of a milestone, and it's celebrating with a special edition. Not just one special edition, either. The all-American off-road brand has wheeled out six – one for each model in its lineup. Though the specifications for each of these 75th Anniversary Edition specials differs from model to model, they each feature an available green paintjob, wheels in a low-gloss bronze finish, orange trim, interiors upholstered in a unique mesh fabric, and (of course) special badges inside and out. They also each feature some manner of open-air aperture, from the fully convertible roof on the Wrangler through the fabric roof panel on the Renegade to the more conventional power sunroofs on the Cherokee, Grand Cherokee, Compass, and Patriot. The shades of green paint depend on the model. The Compass, Patriot, Cherokee, and Grand Cherokee offer Recon Green, the Renegade a brighter Jungle Green, and the Wrangler and Wrangler Unlimited can be had in Sarge Green. If you don't dig the verde approach, you can still order yours up in a different color. The Wrangler special naturally comes the most prepared for off-road duty, packed with rock-crawling equipment like Dana axles with a choice of axle ratios. For more details, you'll want to delve into the press release below, and for a closer look you can scope them out in the accompanying image gallery and video footage. The 75th Anniversary editions are set to hit dealers within the next few months, with prices starting at $22,475 (plus $995 destination) for the Patriot. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. THE JEEP® BRAND CELEBRATES 75 YEARS OF LEGENDARY HISTORY WITH FULL LINEUP OF NEW SPECIAL-EDITION MODELS - New 75th Anniversary models available across entire Jeep® lineup - Special-edition vehicles feature unique available Jeep Green exterior, Satin Bronze wheels, Bronze and Orange exterior accents, unique interiors, open-air freedom and 75th Anniversary badging - Available in Jeep dealer showrooms first quarter 2016 January 6, 2016 , Auburn Hills, Mich. - Born in 1941, the Jeep® brand celebrates 75 years of 4x4 leadership, military history, and open-air freedom and adventure in 2016. As a tribute to this diamond anniversary celebration, Jeep is creating distinctive, 75th Anniversary special-edition models of each vehicle in its lineup.

Recharge Wrap-up: Formula E gets more power, Tesla outsells competition

Tesla sold significantly more electric vehicles than its competitors in 2015. Tesla delivered 50,580 vehicles in 2015. 208 of those were its new Model X SUV, and likely half of its Model S units were sold in the US. By comparison, Nissan sold 17,269 Leafs. For General Motors, through the end of November, Cadillac sold 1,024 ELRs, while Chevrolet sold 15,393 Volts and 2,477 Spark EVs. Ford sold similar numbers of its plug-in vehicles in 2015, compared to Nissan and GM, putting each of those automakers between 17,000 and 19,000 EVs. By comparison, Tesla had quite a year. Read more at Teslarati. Lexus is teasing an "unprecedented" world premiere at the 2016 Detroit Auto Show. The automaker is rumored to debut its LC 500, powered by a 465-horsepower, 5.0-liter V8, as well as the LC 500h using a hybrid powertrain consisting of a V6 engine and electric motor. The LC 500h is rumored to produce over 470 horsepower. The Lexus LC will be based on the LF-LC concept that debuted in Detroit in 2012. Lexus has set up a dedicated microsite for its presentation at the Detroit show on January 11. Read more from Hybrid Cars. Formula E will raise its power limit for its third season. According to the newly published FIA Formula E 2016 Technical Regulations, output will be boosted from a maximum 200 kW (268 horsepower) to 250 kW (335 horsepower). While race energy will still be limited to 28 kWh, the battery weight limit has been raised from 200 kilograms (441 pounds) to 230 kilograms (507 pounds), likely to help accommodate the higher output. Meanwhile, overall car weight drops from 888 kilograms (1958 pounds) to 880 kilograms (1940 pounds). Lighter, more powerful cars should make the next season of Formula E even more exciting. Read more at Current E. Related Gallery Lexus LF-LC Concept: Detroit 2012 View 11 Photos News Source: Telsarati, Hybrid Cars, Lexus, Current E, FIA Formula EImage Credit: Formula E Green Motorsports Detroit Auto Show Lexus Tesla Electric Hybrid recharge wrapup

McLaren reveals 675LT concept with JVCKenwood tech at CES

McLaren and Japanese electronics giant JVCKenwood are drawing on a quarter-century of collaboration with this technological concept at CES this year. It's based on the limited-edition 675LT, but packs more advanced tech. For starters, it has a head-up display that projects vital information right into the driver's line of sight – including the presence of other vehicles in its vicinity through the on-board Advanced Driver Assistance System. To go with it, McLaren replaced the steering wheel with that of the P1 GTR, and fitted controls for the HUD where the IPAS boost and DRS adaptive rear wing buttons would be. While they were at it, McLaren and JVCKenwood also pulled out all the mirrors and replaced them with digital cameras. There's one on each door to streamline the side mirrors, and another digital rear view mirror inside feeding from a third camera below the Airbrake rear wing. If only such systems were certified for use on the road. The one-off concept also features a unique treatment inside and out. It's done up in Onyx Black with silver racing stripes outside. And the interior features a mix of leather and technical fabrics. With the air conditioning system deleted, vital controls moved to the steering wheel, and gauges integrated into the HUD, McLaren also removed the center console and instrument binnacle altogether, giving the cockpit a more airy feel. The finished product looks pretty cool, but even without all the cool tech, the 675LT is all sold out in both coupe and Spyder forms. McLAREN 675LT JVCKENWOOD CONCEPT DEBUTS AT CES Woking, UK (January 6, 2016) – McLaren Automotive and JVCKENWOOD unveiled today an innovative design study, the McLaren 675LT JVCKENWOOD Concept, created for the CES® 2016 consumer electronics show in Las Vegas, Nevada. The Concept is based on the new McLaren 675LT Coupe and features a host of new technologies and celebrates the 25th anniversary of their Formula 1™ partnership. McLAREN 675LT DESIGN CONCEPT For its collaboration with JVCKENWOOD, McLaren began with a 675LT Coupe prototype vehicle. The 675LT Coupe, which recently went into production at the start-of-the-art McLaren Production Centre in Woking, England, is the most driver-focused, lightweight and aerodynamically optimized model in the McLaren Super Series family. Strictly limited to 500 units, all sold out within a matter of months.

Audi wants to keep you healthy while behind the wheel

Health tracking is all the rage. You can get smart watches and smart wristbands and all sorts of silly tech to give you intricate metrics about your wellbeing. Hell, my bathroom scale is connected and will automagically sync my latest weight, body fat, and heart rate readings to an app on my smartphone. Bathroom scales and wearables aside, Audi is hoping to bring this fitness-tracking tech to four wheels with its new Fit Driver system. No surprise, the new program was announced at the technophile's paradise that is the Consumer Electronics Show. Paired with a wearable, like an Apple Watch or FitBit, that would monitor heart rate and skin temperature, the car's sensors can track a driver's breathing and driving style. This data can be analyzed alongside weather and traffic information, effectively allowing the car to determine how stressed or tired a driver is. Systems within the vehicle would then be tweaked to "relax, vitalize, or even protect the driver." This can take the form of an automatic massage and adjustments to the cabin temperature, ambient lighting, and infotainment. So when you're about to go full road rage because there's a Camry doing ten under in the left lane, Sirius could flip on the easy listening of Watercolors to calm you down. Naturally, this technology is still in the early stages, and there's no word about when it could actually arrive in production vehicles. But as driverless systems evolve, Audi is aiming to develop such an advanced health suite that an autonomous vehicle could detect a medical emergency, pull over safely, and call for assistance. Here's to the future, folks. Check out the official release below. Audi Fit Driver Audi envisions a future in which drivers leave their cars more relaxed than when they entered them. The car, as a personal yet simultaneously connected space, is ideal for health and fitness monitoring. Under the motto "my Audi cares for me", Audi Fit Driver will become a supportive driving companio. The Audi Fit Driver project focuses on the well-being and health of the driver. A wearable (fitness wristband or smartwatch) monitors important vital parameters such as heart rate and skin temperature. Vehicle sensors supplement this data with information on driving style, breathing rate and relevant environmental data such as weather or traffic conditions. The current state of the driver, such as elevated stress or fatigue, is deduced from the collected data.

Fisker sues Aston Martin for $100M over The Force 1

We were expecting Henrik Fisker to bring The Force 1, his next vehicle design, to next week's Detroit Auto Show, but that might not happen. In December an attorney for Aston Martin sent Fisker a letter asking the Danish designer to either not show his car in Detroit or to change the design. Fisker responded to that letter by filing $100-million civil extortion lawsuit against Aston Martin in a California Federal court, naming company CEO Andy Palmer, chief spokesman Simon Sproule, and chief creative officer Marek Reichman as defendants. Based on the overhead-view sketch, the English carmaker believes that The Force 1 is "strikingly similar to several of Aston Martin's cars, including the DB10" from the movie Spectre. At the same time the carmaker's letter to Fisker admitted that it doesn't know what the final design will look like, but it appears that the carmaker's intent to "protect its valuable rights if necessary" could not make way for patience. Or perhaps Aston Martin is trying to prevent another Thunderbolt episode before it starts. That incident last year involved the carmaker suing Fisker over his reimagined Vanquish, with the two settling the matter out of court. Fisker says The Force 1 has isn't based on an Aston Martin, and as part of the lawsuit submitted a design breakdown of both the DB10 and The Force 1. Fisker's latest is apparently in partnership with VL Automotive, the company that's been threatening to release a V8-powered Karma sedan for years now, and the Detroit show organizers say they've been working with VL, not Fisker. The lawsuit seeks the $100 million for punitive and compensatory damages and court costs, alleging that Aston Martin's actions "would subject [Fisker] to public humiliation, embarrassment in the industry, and significant financial losses." The public allegations go even further, Fisker's lawyer Jonathan Michaels saying that the English brand, "In an effort to protect itself from further market erosion... conspired and devised a scheme to stomp out Henrik Fisker's competitive presence in the luxury sports car industry." News Source: Wall Street Journal Design/Style Government/Legal Detroit Auto Show Aston Martin Fisker Coupe Luxury Performance lawsuit Henrik Fisker spectre aston martin db10