1965 Dodge Dart Gt 3.7l on 2040-cars
Lake Orion, Michigan, United States
Body Type:U/K
Engine:3.7L 3687CC 225Cu. In. l6 GAS Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Interior Color: Black
Make: Dodge
Number of Cylinders: 6
Model: Dart
Trim: GT
Warranty: Vehicle does NOT have an existing warranty
Drive Type: U/K
Mileage: 37,845
Sub Model: gt
Exterior Color: top banana yellow
Purchased car in 2010 from original owners son in law who brought car back from new York. Disassembled entire car except rear axle. a very clean and solid car with no rust. Was originally a pale yellow or beige and decided to go with an original yellow Chrysler used in 1970-1973 called top banana or lemon twist and added a orange pearl over the yellow, just a touch, very subtle with 3 coats of clear. Wet blocked and buffed, has a very nice finish.
Rebuilt 904 automatic transmission
3.23 rear axle ratio
225 slant six w/2bbl rebuilt carb, all new wires,cap,roter,plugs,condensor. runs excellent !
New exhaust
New fuel tank and sending unit
Wheels are American racing torque thrust 17 x 7 on all 4
Tires are continental 205 / 50 /17 fronts and 235 / 55/ 17 rears
Interior all original and very nice condition, new carpet and a recovered package tray.
No cracks in dash pad, very nice , I couldn't believe it.
Only found 1 small crack in drivers seat very hard to see.
Brand new trunk mat.
I have restored many cars in my career of 35 years in the paint and body shop business. This car is really a unique piece and is fun to drive!!
Dodge Dart for Sale
Auto Services in Michigan
Welling`s Service ★★★★★
Waterford Garage ★★★★★
Victor George Chrysler-Jeep ★★★★★
Twin Village Tire & Auto Repair ★★★★★
Tuffy Auto Service Centers ★★★★★
Tuffy Auto Service Center ★★★★★
Auto blog
Dodge lets us drive 100-years' worth of history [w/videos]
Thu, 03 Jul 2014
A raft of important production models from the last hundred years were available for me to either drive or ride in.
Dodge is 100 years old this year. So, as happened on Ford's recent centennial, the 50-year birthday of the Porsche 911, and others, the company has an excuse to trot out the highlights of its history next to its upcoming model lineup, and declare that "these are the fruits of the Dodge Boys' tree whose roots have grown strong." Or something like that. Never so hampered by marketing skepticism that I'll pass up the opportunity to burn someone else's rubber, I was happy to drive out to Meadow Brook Hall in Rochester Hills, MI - former grand estate of the Dodge family - to hear the spiel.
How to turn a Dodge airport tug into a trail slayer
Sun, 16 Nov 2014Sometimes, having a ton of fun requires takes a ton of work. Just nine days before the so-called Ultimate Adventure 2014, the folks behind 4-Wheel & Off-Road had 40 tasks to complete in order to turn the ratty truck pictured above into a machine that could excel on treacherous off-road trails while still being able to handle highway jaunts. Much of process behind the build was chronicled on the latest episode of Dirt Every Day.
The team's vehicle started life as a 1990 Dodge tug truck that spent part of its life hauling around airplanes. The builders hung on to the Cummins six-cylinder diesel, but they tossed out practically everything else for the project, with some seriously heavy-duty replacement parts for the transmission, transfer case, axles and a whole lot more. The process was certainly a ton of work, but the end result looks like a fantastic crawler.
Sure, it might have been easier to bring a truck that was already prepared, but where would the fun in that have been? Stay tuned until the end of the video for a few glimpses of the completed Dodge and peek at some of the punishment it goes through.
Mopar unveils Dodge Challenger Drag Pak [w/video]
Sat, Jun 27 2015Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.