Ford Fairlane, page #82

Ford Fairlane Price Analytics

About Ford Fairlane

Auto blog

Ford EcoBoost smashes records at Daytona

Some mighty machines have lapped the banks of the Daytona International Speedway over the years: thunderous V8-powered stock cars, Le Mans-conquering Group C prototypes, open-wheel Champ Cars, knee-dragging superbikes... heck, the infield lake has even hosted powerboat racing. But this - this is the fastest car ever to lap the legendary raceway.
What you're looking at is the new Daytona Prototype being prepared by Riley Technologies for the new United SportsCar Championship. The car, released just last week, is powered by a new 3.5-liter turbocharged V6 from Ford's EcoBoost family, and just obliterated the top speed at the track with a blistering 222.971 miles per hour through the traps.
That's enough to annihilate the previous record that was set, also under Ford power, by Bill Elliott while placing his Thunderbird on pole for the 1987 Daytona 500 that he would go on to win. His 210.364 mph record had stood for 26 years until now.

Check out Ford's fully automated self-parking car [w/video]

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.

Next-gen Ford Cobra Jet development underway, but will it be a Mustang?

Ford might be stepping away from the NHRA, but it isn't abandoning drag racing altogether. Hot Rod says that Ford confirmed a next-gen Cobra Jet factory drag racer is in the works, but the report also speculates that a new Cobra Jet could switch away from the Mustang nameplate.
Even though talk of a new Cobra Jet coincides with the all-new 2015 Mustang, the lack of confirmation for the dragster's platform leaves Hot Rod to guess that the car might switch to another platform - specifically a front-drive-based, unibody car like the Fusion or Taurus. We'd hate to think of a world with a NASCAR-ized dragster from Ford Racing, but it's also highly unlikely that the Mustang Cobra Jet would step away from its quarter-mile rivals like the Chevy COPO Camaro and Dodge Challenger Drag Pak.

How and why Ford is rolling out Vignale in Europe

We know that Ford is positioning the new, upscale Vignale brand in Europe to fill a niche market of customers who want a bit more luxury, a lot more service and the same reliability and dependability that a non-Vignale Ford offers. But so far, we've been in the dark regarding how the Blue Oval will sell Vignale vehicles, how many of them will be created, and what the new sub-brand has in store for the future.
Gaetano Thorel, Ford's European marketing head, recently was interviewed by Automotive News and shared details about Ford Vignale. Thorel says, "The Vignale trim line will be priced like an ST model but attract a completely different type of customer." Specifically, he says it will attract customers in the upper 15 percent of the price band who don't want a performance-oriented ST model. He adds that Vignale cars will be about 10 percent more expensive than Titanium-trim cars. About 500 of Ford's European dealers will sell Vignale Fords, Thorel says, "in areas that make sense." The automaker expects 10 percent of its European sales to be Vignale cars, which equates to about 5 percent of its global sales. When asked if there are any other Vignale models planned beyond the Mondeo, Thorel said, "There is nothing written in stone yet."

Ford recalling nearly 24,000 Focus EV and C-Max models over door chime

Ford will be voluntarily recalling 23,830 Focus Electric and C-Max Hybrid and Energi models equipped with push-button ignition, according to The Detroit News. Why? Because the cars don't make a noise when the driver's door is open, and are therefore in violation of federal regulations. It's not as silly as Honda's badging recall that isn't a recall, but it's close.
Actually, that's not exactly fair. The chime is supposed to come on when the driver's door is open, as it reminds drivers not to leave their cars on or leave key fobs in the car, an easy thing to forget when the cars in question make virtually no noise at idle and do not require keys in ignitions.
The recall, which Ford is conducting voluntarily, covers 2012 and 2013 Focus Electric hatchbacks and 2013 C-Max Hybrid and Energi models. The overwhelming majority, around 22,900 units, were sold in the US, while the remaining 900 units are in Canada. How many of each model are covered in the recall is not immediately clear.

Why Ford's Alan Mulally would be right for Microsoft, or any company

That Mulally was seriously being considered says a great deal about Microsoft and Mulally.
It appears that the chatter about Ford CEO Alan Mulally possibly leaving early to take over as CEO of Microsoft is losing air pretty fast. What's pretty interesting is that it got any traction in the first place.

Ford EcoBoost V6 hits the dyno before hitting the track

Ford Racing just unveiled the Riley Daytona Prototype that will make its racing in the United SportsCar Racing Championship Rolex 24 at Daytona in January, and now it has released a video showing development of twin-turbo 3.5-liter EcoBoost V6 that powers the car. Using the same block and heads that can be found on a production Ford Taurus SHO, this new racecar benefits from the collaboration between Ford Racing and Ford powertrain engineers.
While we still don't know what kind of power this engine is putting out, it has definitely gotten a workout at Ford's 17G dyno. This area deep within Ford allows the automaker's racing program to work hand-in-hand with production engine programs, which can be a benefit to racing operations and production cars alike. Scroll down to hear a few people from Ford talk about the crosspollination between its racing and engine teams and watch the EcoBoost get red hot on the dyno.

Mustang Cobra Jet prototype garners $200k for charity at Barrett-Jackson

A few weeks ago we brought you news of a one-off Mustang Cobra Jet that Ford was donating to charity. The car was set to be auctioned off by Barrett-Jackson in Las Vegas to benefit the National Multiple Sclerosis Society. Now that auction has taken place, bringing in an impressive $200,000 for MS research.
That's a lot of zeros for a Mustang, much less one you can't even drive on the street. But the unique pony car, bearing serial number 2014 BJMS CJXX1, packs a 5.0-liter supercharged V8, competition gearbox, wheelie bar, roll cage... all you could want, in short, in a turn-key drag racer. And all that for a good cause.

Amid Mulally rumors, Bill Ford praises company's deep bench

Bill Ford went on the offensive to combat the rumors that CEO Alan Mulally would leave Dearborn for Steve Ballmer's vacated position leading Microsoft, adding that even if the 68-year-old, former Boeing exec were to depart, the Ford executive team is in a good place.
"I'm happy [Mulally] is going to stick around. But we also feel really good about where we are in terms of succession," Ford told Bloomberg TV, according to Automotive News. Rumors first cropped up about Mulally leaving Ford when AllThingsD speculated that he was in the running, early last month. In that same report, which you can read here, Ford's board of directors reportedly okayed the CEO stepping down ahead of his planned retirement in 2014.
That opened the floodgates, culminating in a report from a few days ago that the rumors over Ballmer's successor just might be true. The story is especially troubling, as Ford hasn't had Mulally under contract, according to AN. "He's here as long as he and I would like it to happen," Ford said, "We're also cognizant of training the next generation and getting them ready to go as well."

3dCarbon now offering body kit for Ford Fusion

A factory-backed body kit by 3dCarbon is now available to Ford Fusion owners who want their car to stand out from the crowd while not being too flashy. The body kit adds a more aggressive front spoiler, side skirts, rear body trim and spoiler that are, in fact, integrated quite nicely into the Fusion's already-comely styling, just as 3dCarbon claims. All Fusions with the kit also receive dual exhaust ports with the stainless-steel exhaust surrounds usually reserved for the Titanium package Fusion EcoBoost models.
A nice detail of 3dCarbon's injection-molded urethane body kit is that it has undergone crash testing to certify that it can withstand crashes up to five miles per hour. Because of this, the kit is warrantied by 3dCarbon for five years or 50,000 miles, much like Ford's warranty on its own parts. In fact, the kit is available through participating Ford dealers and can be financed through Ford Motor Credit. Buyers can purchase the kit - pre-painted or unpainted - and install it themselves, or it can be purchased with a new Ford Fusion and installed at the dealer, pre-painted to factory specifications. Of course, it can also be ordered directly from the source. Take a look at the press release below for more detailed information on the body kit, and let us know what you think of it in Comments.