1967 Ford Mustang on 2040-cars

Auto blog

Toyo Tires will bring another wild catalog of rides to SEMA

Toyo Tires carts all kinds of toys to SEMA every year, the rubber company planning another 30 or so automotive exhibits this year in two locations. One of them, the Baja 911, comes with a pedigree not usually associated with the bewildering wares hawked at the Las Vegas show. TJ Russell was once lead fabricator for Singer Vehicle Design, now he's the head of Russell Built Fabrication in Sun Valley, CA. Sticking with the marque he knows well, Russell started with a 1991 Porsche Carrera 4 cabriolet, fitted the interior with a full roll cage, then built a hardtop around it to design a desert runner channeling the old Rothmans safari 911s. Underneath that bodywork lives a box-plate trailing arm suspension with 12 inches of travel, working 15-inch Fifteen52 FIA-approved Gravel wheels and 30-inch Toyo Open Country A/T II tires. Power comes from a purpose-built 3.8-liter air-cooled flat-six with about 350 horsepower — 100 hp more than stock — in a car that weighs 400 pounds less than the original. Oh, and as documented on Instagram with the tagline "All race outside, all business inside," the interior's full of quilted, cross-stitched leather, and Toyo says Russell's going to do a low-volume run of the Baja 911 starting early next year. ruffian-ford-mustang-sema-01 View 10 Photos Chris Ashton built a 1970 Ford Mustang Fastback called the Ruffian Mustang, inspired by the Trans Am Racing Series. The exterior changes are more subtle than one might think – the chin spoiler, hood scoop, and side mirrors are barely exaggerated versions of those on the original car, the intake vents astride the front lights and the steel bumpers teleported from 1970. Changes outside include de-chromed and flush-mounted glass, vented hood, front fenders that are dropped an inch, rear fender vents, dual side-exit pipes, and gargantuan fender flares over staggered Signature One wheels and Toyo Proxes 888 tires. The interior's fitted with a roll cage and race car workings. In spite of the Boss 427 badging, the engine's a 625-hp Chevrolet LS3 V8. button-built-ferrari-355-sema-01 View 13 Photos The Button Built Ferrari BB355TT picks up from last year's stanced BB328GTS widebody that gave many Internet denizens heart attacks. Laid up on a 1999 355 Berlinetta, the BB version appends a widebody kit designed Mitchell Button, rendered by Khyzyl Saleem and drenched in Azzuro la Plata, a color from Ferrari's Scagliette palette first used on a 1967 275GTB Le Mans racer.

Ford sticking with manuals for RS models

Traditional stick-shift gearboxes may be losing ground quickly to dual-clutch transmissions, but Ford knows what hot hatch enthusiasts want. That's why it's sticking with manual transmissions on its RS models for the foreseeable future. The Blue Oval automaker caught our attention yesterday when it revealed the new Focus RS, packing an upgraded version of the turbo four from the Mustang, a trick new all-wheel-drive system and an old-school six-speed manual. After speaking to Ford's product chief Raj Nair at the hot hatch's launch, Autocar reports that the six-speed is here to stay. "All our current research says that customers really like these kinds of cars to have a manual gearbox," Nair told the British publication. "We'll keep looking at market trends, and of course we'll give customers what they want, but for now the manual stays." Autocar further suggests that the same principle will apply to any further Rallye Sport models, so if and when a Fiesta RS rolls around, it's likely it will stick with a stick as well. Although the less potent Focus ST is offered in diesel and wagon forms overseas, wherever it's sold and in whatever form, the six-speed stays a constant in that model as well, just as it does in the smaller Fiesta ST. That doesn't mean that other Ford Performance models won't go without a clutch pedal, though. The new GT employs a seven-speed dual-clutch gearbox and the new F-150 Raptor channels its muscle through a ten-speed automatic. But as far as Ford's hot hatches go, it looks like the manual will remain alive and well. Related Video: Featured Gallery 2016 Ford Focus RS News Source: Autocar Ford Hatchback Performance manual ford fiesta rs

Ford, Alcoa announce next generation of aluminum lightweighting for F-150

Ford likes what it has seen with the use of aluminum in its world-beating F-150 pickup trucks. Now, the Blue Oval is working with Alcoa to use that company's Micromill material to increase the amount of aluminum in Ford vehicles. In fact, Ford will start using Micromill on 2016 model-year F-150s later this year, and will double the material's use in 2017. The purpose, as you might suspect, is light weighting, which allows Ford to boost towing capacity while adding as little weight as possible. Ford will be the first automaker to use Micromill, and will use it in both structural components and exterior panels. Micromill's rolling-mill system cuts the time it takes to turn molten metal into coil to 20 minutes from about 20 days. Already, Ford has had positive results by using aluminum on its leading pickup truck model. In April, it was announced that the 2015 Ford F-150 achieved a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing. Safety features like inflatable seat belts, adaptive steering columns and a forward collision warning system helped matters. General Motors may have taken note of those results, even after running an ad campaign touting its continued use of steel over aluminum. Last month, GM said it would sink $877 million into its Flint, MI, truck factory. Reuters said much of the expense was to convert many of the bodies for models like the Chevrolet Silverado and GMC Sierra pickups into aluminum. You can take a look at Ford's press release below. Ford Motor Company and Alcoa Inc. are collaborating to produce next-generation automotive aluminum alloys that are more formable and design-friendly. Ford will use Alcoa's Micromill® material in multiple components on the 2016 F-150 – becoming the first automaker to use the advanced automotive aluminum commercially. The companies entered into a joint development agreement to collaborate on next-generation aluminum alloys for automotive parts using Micromill™ technology. ''Light-weighting enables us to design vehicles with great customer attributes – like the F-150, which can tow more, haul more, accelerate quicker and stop faster than the previous F-150, and is more fuel-efficient than ever," said Raj Nair, Ford group vice president and chief technical officer, Global Product Development.