Fiat 500X, page #19

Auto blog

2016 Fiat 500X First Drive [w/videos]

Fiat's return to the US market four years ago is already cooling off. Neither the Lilliputian 500 or its larger sibling, the 500L, have caught on with mainstream customers. Both were designed years ago for European roads, which are tight and crowded. That's the antithesis of America's driving ethos. Fiat knows this, and its answer is the 2016 500X. It lays the brand's curvy design over a crossover-style package with available all-wheel-drive. There's more room for cargo to suit our national preference for extra space. The 500X still has Italian charm, but it feels more at home on US roads than other Fiats. Put simply, the 500X isn't a transplant, it's made for American buyers (even if it's assembled in Italy, alongside the Jeep Renegade). We were skeptical that the 500X could turn around Fiat's fortunes, but this cute crossover had a way of winning us over. Maybe it was the bright arancio paint (Italian for "orange") of our test car, the most expressive of the 12 exterior hues. Even in the shadowy indoor setting where our test drive begins, in Culver City, CA, this car stands out. In stark contrast, the black and grey interior is subdued and tasteful. Out test car is a Trekking model, the middle of five trim levels, fitted with the optional 2.4-liter engine. This naturally aspirated four-cylinder is a 'free' upgrade from the standard 1.4-liter turbo, but mandates the addition of a nine-speed automatic transmission for $1,500. Taking off through morning traffic, we head for the Santa Monica Freeway. At the entrance we're pitted against an older Toyota Camry in an on-ramp drag race. We lay on the throttle to put the Tigershark engine's 180 horsepower and 175 pound-feet of torque into full use, and leave the Camry in the dust. As we head north toward Malibu, we can already tell that the 500X feels like a different kind of Fiat, more substantial. It fills the lane. There's an upright driving position, and we feel confident cruising along at 70 miles per hour. Okay, so the 500X can handle an interstate, but what about an open road? We make our way to the Pacific Coast Highway, California's State Route 1, a logical place to test Fiat's claim of being more in step with American buyers. There are stoplights. People wander across the street towards the beach. Cars pass us and we pass them. Subtract the ocean air and surfers, and this road is what a lot of US motorists deal with every day. The 500X is all up for it.

Fiat opens up vintage-style 1957 Edition to 500 Cabrio

If you liked the 1957 edition 500 that Fiat introduced over a year ago but really wanted the open-air flexibility of the 500C, we've got good news for you: The Italian automaker has extended the vintage-look edition to the convertible model. Celebrating "the spirit of the original 1957 Nuova 500," the 1957 Edition adopts a vintage look with retro 16-inch wheels with a wide chrome lip and body-colored hub along with throwback Fiat logos front and rear and a sport-tuned suspension. It's also got an ivory interior, brown leather seats with ivory stitching, grey door panels and more. And of course the convertible version comes with a canvas roof panel to let in the air and sunshine. The 1957 Edition will be offered in white, light green or baby blue. Pricing for the US starts at $24,700, representing a $1,900 premium over the Lounge trim on which it's based. FIAT INTRODUCES NEW FIAT 500 1957 EDITION CABRIO - FIAT brand builds on the success of the Fiat 500 1957 Edition with the addition of a cabrio version - 2015 Fiat 500c 1957 Edition offers vintage Italian styling with open-air driving excitement, starting at $24,700 U.S. MSRP - Limited-production model builds on the Fiat 500's storied past with unique exterior and interior design elements - Novel exterior appearance, three classic exterior colors, 1957-era body-color wheel design and vintage "FIAT" emblems pay homage to the historic Fiat Nuova 500 April 13, 2015 , Auburn Hills, Mich. - Just in time for the spring and summer top-down driving season, the FIAT brand today introduced the new Fiat 500 1957 Edition Cabrio. The FIAT brand continues to celebrate the storied past of the historic Nuova 500 with the addition of a cabrio version of the popular Fiat 500 1957 Edition, which was introduced in 2014. The Fiat 500c 1957 Edition features a premium dual-layer power-operated cloth top – a contemporary solution to the famous canvas roof on the original Cinquecento – designed to deliver all-season driving pleasure with the top up or down. "We continue to expand the FIAT lineup," said Jason Stoicevich, Head of FIAT Brand for North America. "The Fiat 500 1957 Edition celebrates the spirit of the original 1957 Nuova 500, and with the arrival of a cabrio version, we are adding open-air fun to the iconic Italian-designed Fiat 500 1957 Edition." Pricing for the well-equipped limited-production model starts at $24,700 U.S. MSRP, just $1,900 more than a base Fiat 500c Lounge.

5,600 Fiat 500e EVs recalled for buggy software

Fiat will be recalling some 5,600 of its all-electric 500e hatchbacks, all of which hail from model years 2013, 2014 and 2015. Weirdly, this recall is being caused by a March 2015 software update. According to The Detroit News, last month's update addressed the software in the Electric Vehicle Control Unit and Battery Pack Control Module "to implement improvements in charging system robustness, diagnostic capability and range estimation over life. In addition to the primary reasons for the software update, Limp Home Mode was included as part of battery pack software continuous improvement," FCA explained. "It was because of this software update that the software incompatibility occurred where the EVCU did not recognize the Limp Home Mode." Should your car go into limp mode, "incompatible software between Electric Vehicle Control Unit (EVCU) and Battery Pack Control Module (BPCM) may cause the electric propulsion system to fully shut down," according to the National Highway Traffic Safety Administration bulletin. So yes, the March software update can cause your EV to stall. Vehicles built between March 27, 2012 and November 1, 2014, which sounds like basically all 500es, are affected by the recall. Chrysler will begin notifying owners with recall operations to begin in the middle of next month. Scroll down for the official NHTSA bulletin. Related Video: Report Receipt Date: MAR 27, 2015 NHTSA Campaign Number: 15V179000 Component(s): ELECTRICAL SYSTEM Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Fiat 500 EV vehicles manufactured March 27, 2012, to November 1, 2014. If the vehicle goes in to limp home mode, incompatible software between Electric Vehicle Control Unit (EVCU) and Battery Pack Control Module (BPCM) may cause the electric propulsion system to fully shut down. CONSEQUENCE: An electric propulsion system shut down will cause a stall-like condition, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will update the vehicle software to ensure compatability between components, free of charge. The recall is expected to begin May 15, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R15. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.

Ram boss says not to expect midsize pickup in America

Remember that mysterious midsize four-door pickup FCA was spotted testing recently? It may be sold as a Fiat in markets overseas, but don't expect it to join the Ram lineup in North America. At least not according to the latest word from the truck brand's new boss. Speaking with Automotive News at the New York Auto Show, Ram CEO Bob Hegbloom outlined four criteria for a successful midsize pickup, particularly in the North American marketplace: they have less capability than a fullsize truck, but return with a more compact form, lower price and considerably higher fuel economy. "I've been able to develop a strategy to come up with three of the four," said Hegbloom, but "I haven't seen anyone who can deliver on all four." Smaller and less capable are easy, but getting both the price and the fuel consumption down at the same time is where it gets tricky. As it is, a Ram 1500 with the diesel engine and rear-wheel drive delivers 29 miles per gallon on the highway, which is already more than the 27-mpg rating on the midsize Chevy Colorado and GMC Canyon. But Hegbloom figures that in order to justify a midsize pickup, American buyers would expect at least 35 mpg on the highway, and in order to do so, FCA would have to employ some trick tech, which would in turn raise the price beyond an attractive level. The last time Chrysler offered a midsize truck in America was with the Dakota that was discontinued in 2011. Ford similarly ceased offering the Ranger in North America in 2012, leaving the new Colorado and Canyon to take on the Toyota Tacoma and Nissan Frontier in the compact/midsize pickup market in the US. With the prospect of a Ram version apparently off the table, then, Fiat's midsize four-door pickup is likely take on the likes of the Volkswagen Amarok, Mitsubishi Triton and Toyota Hilux in markets like Europe and South America. But like those trucks, it will likely never see the inside of an American showroom.

Ralph Gilles named Fiat Chrysler head of design

The amalgamation of two major automakers like Fiat and Chrysler inevitably means that there'll be some redundancy. There can't be two design chiefs for the entire group, for example, so the Italian-American automaker has named just one to oversee all design for its various divisions – and that one individual is Ralph Gilles. A Chrysler group veteran, Gilles has been at Auburn Hills since 1992, and has held a number of key positions along the way. He has until now served as senior vice president in charge of what's now known as the FCA North American Design Office – a position he assumed in June 2009 when it was still just the Chrysler design office – and has previously run the Dodge and SRT brands and headed up the company's racing activities. In assuming his new role as the group's Head of Design, Gilles will also step up to the FCA Group Executive Council. Meanwhile Lorenzo Ramaciotti, who joined Fiat as head of design in 2007 after serving the same function at Pininfarina, is now set to retire. Along with the Gilles appointment and Ramaciotti retirement, FCA has named Mauro Fenzi as group COO Systems and head of Comau, Fiat's robotic machinery division. FCA Announces Executive Changes - Appoints Gilles as Chief Designer - Names Fenzi COO Systems and CEO of Comau April 1, 2015 , London - Fiat Chrysler Automobiles N.V. (NYSE: FCAU / MI: FCA) today announced that Ralph Gilles was named Head of Design and member of the FCA Group Executive Council (GEC). He currently leads the FCA North American Design Office as Senior Vice President, a position he was named to in June 2009. The GEC is the highest management-level decision making body within the FCA organization and is led by the FCA Chief Executive Officer (CEO). Gilles succeeds Lorenzo Ramaciotti, who is retiring after several years of dedicated service with the Company. Ramaciotti will continue to lend his expertise to the group serving as a Special Advisor to the CEO. "We extend our sincere appreciation to Lorenzo for his unwavering dedication, service, leadership and many contributions to the organization," said Sergio Marchionne, Chief Executive Officer, Fiat Chrysler Automobiles N.V. Gilles previously served as CEO – Motorsports; President and CEO – SRT Brand and CEO – Dodge Brand for FCA US in addition to his leadership role in Design. He joined the Company in 1992.

Fiat Beast of Turin fires up, vows to kill all in its path of destruction

The roadways, racetracks and lawns of Goodwood have seen a lot of varied machinery over the years. But few if any can match the Beast of Turin for outright raunchiness and brutality. The vehicle in question is a Fiat S76, built in 1911 to do nothing but go fast in a straight line, contesting the era's outright land-speed record. It features a monstrous 28.5-liter four-cylinder engine churning out 290 horsepower that propelled what would become known as the Beast of Turin to a top speed of around 140 miles per hour, which was downright crazy for that era. Now restored to running condition, the Beast of Turin is set to hit the Goodwood Festival of Speed this June. But before it does, Charles March – Earl of March and Kinrara and lord of Goodwood House – took a ride in it around his estate on a date no less suitable than Friday the 13th of March. Witness the mayhem in the video above. News Source: Goodwood Road & Racing via YouTube Fiat Automotive History Racing Vehicles Classics Videos Goodwood autoblog black

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

2015 Fiat 500C Abarth Automatic

"I would not, could not in a tree. Not in a car, you let me be. I do not like them in a box. I do not like them with a fox. I do not like them in a house. I do not like them with a mouse. I do not like them here or there. I do not like them anywhere. I do not like green eggs and ham. I do not like them Sam-I-Am." Why am I quoting Dr. Seuss' classic children's tale in the review of a small Fiat? Well, much like oddly colored eggs and ham, for the 500C Abarth, Fiat has taken something formerly palatable and added a rather bizarre quality – a six-speed automatic transmission. "I do not like an auto trans," I said. "I'd only drive it in a van." What would happen to the 500 Abarth's hilariously charming and flawed character? Isn't an automatic gearbox diametrically opposed to the cheap and cheerful driving pleasure inherent in the scorpion-badged Cinquecento? After a week behind the wheel, I was shocked to find that the auto Abarth is nearly as entertaining as its clutch-equipped counterpart. Driving Notes The Aisin six-speed automatic is beefed up for the higher torque of the hot 500 Abarth, and the final drive ratio is shorter. Despite the Abarth's spicier character, the shifter retains the same PRNDL pattern and piano-black surround as the standard 500. While I laud Fiat for offering a correct shifter layout to the manual-shifting scheme – pull to upshift and push to downshift – that smart move is overshadowed by the lack of wheel-mounted paddle shifters. There's not much else to complain about with the new automatic, because on the road it delivers similar performance to the five-speed manual. Upshifts are smooth and quick in the standard setting, and only get sharper if you push the Sport button on the dash. On top of that, wide-open-throttle upshifts show off the sonorous voice of the Abarth-tuned exhaust. It pops and cracks and belches in a horribly, hilariously anti-social way. I love it. The twin pipes are just as vocal on the rev-matched downshifts. The gearbox isn't as quick to drop ratios as some of its two-pedal competitors, like the dual-clutch-equipped Volkswagen GTI or even the traditional automatic offered in the Mini Cooper S (coincidentally also an Aisin unit). That said, the difference isn't significant enough to count as a major demerit. One minor change with the transmission is the power output. While the manual model has 160 horsepower, the auto drops to 157. Torque, though, is up from 170 pound-feet to 183 lb-ft.

Ram and Fiat working on possible midsize pickup for global markets

The midsize pickup segment is enjoying a recent boom globally, with updated models like the new Ford Ranger on the way and a revised Toyota Hilux already testing. The next automaker to take the plunge into the market might be FCA with this recently spotted, highly camouflaged truck. Click through the gallery to see the pickup wearing two different disguises during cold-weather testing. Unfortunately, they keep the truck very well hidden, and even the bed is covered in both of them. Still, it appears that the front end wears a fairly upright design, and the four-door cab is obvious. Also, take a look at the rear to spot coil springs for the suspension, rather than leaf springs. According to our spies, this vehicle's size is larger than the current front-wheel drive Fiat Strada and is closer in dimensions to models like the Ranger and Hilux. Of course, the most intriguing question is whether FCA might bring this vehicle to the US as a Ram competitor against the Chevrolet Colorado and GMC Canyon. The company's five-year plan makes no mention of such a model here through at least 2018, though. However, Europe and South America are set to receive a midsize pickup in 2016. Perhaps, that's what we are seeing here. Related Video: Featured Gallery Fiat-Ram Pickup Spy Shots View 14 Photos Image Credit: CarPix Design/Style Spy Photos Fiat RAM Truck FCA