Chrysler Crossfire, page #23

Chrysler Crossfire Price Analytics

About Chrysler Crossfire

Auto blog

Auto bailout cost the US goverment $9.26B

Depending on your outlook, the US Treasury's bailout of General Motors, Chrysler (now FCA) and their financing divisions under the Troubled Asset Relief Program was either a complete boondoggle or a savvy move to secure the future of some major employers. Regardless of where you fall, the auto industry bailout has officially ended, and the numbers have been tallied. Of the $79.69 billion that the Feds invested to keep the automakers afloat, it recouped $70.43 billion – a net loss of $9.26 billion. The final nail in the coffin for the auto bailout came in December 2014 when the Feds sold its shares in Ally Financial, formerly GMAC. The deal turned out pretty good for the government too because the investment turned a 2.4 billion profit. The actual automakers have long been out of the Treasury's hands, though. The current FCA paid back its loans six years early in 2011, the Treasury sold of the last shares of GM in late 2013. According to The Detroit News, the government's books actually show an official loss on the auto bailouts of $16.56 billion. The difference is because the larger figure does not include the interest or dividends paid by the borrowers on the amount lent. While it's easy to see fault in any red ink on the Feds' massive investment, the number is less than some earlier estimates. At one time, deficits around $44 billion were thought possible, and another put things at a $20.3 billion loss. Outside of just the government losing money, the bailouts might have helped the overall economy. A study from the Center for Automotive Research last year estimated that the program saved 2.6 million jobs and about $284.4 billion in personal wealth. It also indicated that the Feds' reduction in income tax revenue alone from Chrysler and GM going under could have been around $100 billion for just 2009 and 2010, significantly more than any loss in the bailout.

Undersized grille was #1 complaint of 2011-2014 Chrysler 300 owners

Not only did the 2005-2011 Chrysler 300 have a big ol' grille, it jutted ahead of the car. The grille was the metaphorical figurehead for the USS 300, and it did its job, making the sedan the Central Casting submission for "in-your-face styling" that rolled down the street winning the game of "Made You Look." The one-billion-dollar redesign for 2011 (pictured above) aimed for more upscale and less aggression - "a more grown-up look" - so the grille shrunk. And Chrysler 300 buyers hated that. So said Chrysler brand president Al Gardner to Edmunds, relating that the smaller grille was "the No. 1 issue" on the list of customer complaints about the model years from 2011 to 2014. It doesn't appear to have been much loved in-house, either, with Ralph Gilles having said of it, "Our previous generation of leaders didn't understand the car very well, and kind of forced this front end on us." That's why the grille on the 2015 model (pictured in 300S trim, inset) was aggrandized by 33 percent, although it's still not as large as on the first generation, and the more fluid design of the current car doesn't let it stand out as before. Gardner went on to say that designers "spent more time on the front end than on anything else," in search of, as Gilles put it, "the attitude it deserves." We'll soon find out if that increases the number of buyers it deserves as well. Related Gallery 2015 Chrysler 300: First Drive View 40 Photos News Source: EdmundsImage Credit: Copyright 2014 AOL Design/Style Chrysler Sedan

Time to catch up with Jay Leno's Garage, including his Lamborghini Espada restoration

If you're already jealous of the time, effort and money that Jay Leno can devote to his massive car collection, prepare to get a little greener with envy with this latest video from Jay Leno's Garage. Instead of the usual format of discussing a model for about ten minutes and then taking it out for a test drive, this week Leno gives viewers on a tour of over a dozen projects concurrently happening in his stable. The breadth of the vehicles shown and the things being done to them run the entire span of the automotive hobby. At the same time, Jay's shop is working on just a simple restoration of his 1969 Lamborghini Espada (pictured), and at the other side of the building, the team is rebuilding a wood-bodied 1914 Detroit Electric from scratch. He eventually plans to slot a more modern electric drivetrain into it. If bikes are more your interest, there's a freshly completed Brough Superior just waiting for a ride, and if American models are your thing, a Ford Bronco is getting a Coyote V8 installed into it. You have some very specific tastes if you can't watch this clip and start wishing at least one of these vehicles could be in your own garage. Other than the personal projects his mechanics are working on in the shop, Jay gets to have them all, plus plenty more.

2015 Chrysler 300 First Drive [w/video]

When Chrysler last updated its 300 in 2011, the fullsize sedan market was a very different place than it is today. Ford's redesigned Taurus was in showrooms, sure, but segment stalwarts like the Toyota Avalon and Chevrolet Impala were languishing at the tail end of their model cycles. And still, the second-generation 300 (not counting the "letter series" cars from the 1950s and '60s, of course) failed to recapitulate the booming success of the model reboot in 2004. Something in the combination of the down economy, higher gas prices and great product from front-wheel-drive entries in the class kept the 300 from the six-digit sales numbers it saw in the early 2000s. For the 2015 model year, Chrysler hopes that a more clearly defined purpose for its big sedan, combined with liberal dipping into the corporate tech toy box, will rekindle buyer interest. Considering the mild characters and front-driver dynamics of its mainstream competition, the promise of V8 power and rear-wheel drive should at least turn the heads of those looking for a car with a little edge. I grabbed the keys of the edgiest of the bunch, the sport-intended 300S, and found a big sedan that gives away some practicality to the rest of its segment mates. The trade-off for the dip in pragmatism is an uptick and driving fun and attitude that should make all the difference for the right buyer. Even though the hard-to-miss face of the 300 has come in for another nip and tuck, that attitude is still clearly on display, too. The grille of the 300 is some 33-percent larger than the outgoing model, though it's still far less brutal than the throwback styling of the 2005 "Baby Bentley" car, at least to my eyes. The cheese grater insert is metallic in most trims of the 300, though the 300S you see in my photo set gets the meaner blacked-out treatment. A quick scroll through our gallery will show you that the rest of the 300 has been similarly changed but not reinvented. Light clusters front and rear are revised, the rear clip has been re-forged with less busy styling, and the whole car has been de-chromed to a large extent (this 300S is wearing the least blingy outfit of the bunch). That rear spoiler is S-model specific. I held the existing 300 interior in fairly high regard, and this new car improves on that base.

Weekly Recap: Chrysler forges ahead with new name, same mission

Chrysler is history. Sort of. The 89-year-old automaker was absorbed into the Fiat Chrysler Automobiles conglomerate that officially launched this fall, and now the local operations will no longer use the Chrysler Group name. Instead, it's FCA US LLC. Catchy, eh? Here's what it means: The sign outside Chrysler's Auburn Hills, MI, headquarters says FCA (which it already did) and obviously, all official documents use the new name, rather than Chrysler. That's about it. The executives, brands and location of the headquarters aren't changing. You'll still be able to buy a Chrysler 200. It's just made by FCA US LLC. This reinforces that FCA is one company going forward – the seventh largest automaker in the world – not a Fiat-Chrysler dual kingdom. While the move is symbolic, it is a conflicting moment for Detroiters, though nothing is really changing. Chrysler has been owned by someone else (Daimler, Cerberus) for the better part of two decades, but it still seemed like it was Chrysler in the traditional sense: A Big 3 automaker in Detroit. Now, it's clearly the US division of a multinational industrial empire; that's good thing for its future stability, but bittersweet nonetheless. Undoubtedly, it's an emotion that's also being felt at Fiat's Turin, Italy, headquarters as the company will no longer officially be called Fiat there. Digest that for a moment. What began in 1899 as the Societa Anonima Fabbrica Italiana di Automobili Torino – or FIAT – is now FCA Italy SpA. In a statement, FCA said the move "is intended to emphasize the fact that all group companies worldwide are part of a single organization." The new names are the latest changes orchestrated by CEO Sergio Marchionne, who continues to makeover FCA as an international automaker that has ties to its heritage – but isn't tied down by it. Everything from the planned spinoff of Ferrari, a new FCA headquarters in London and the pending demise of the Dodge Grand Caravan in 2016 has shown that the company is willing to move quickly, even if it's controversial. While renaming the United States and Italian divisions were the moves most likely to spur controversy, FCA said other regions across the globe will undergo similar name changes this year. Despite the mixed emotions, it's worth noting: The name of the merged company that oversees all of these far-flung units is Fiat Chrysler Automobiles. Obviously the Chrysler corporate name isn't completely history.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

Chrysler officially rebrands as FCA US LLC

Detroit's third-largest automaker has had a lot of names over the years. It was founded as the Chrysler Corporation in 1925, a name it held until 1998 when it was bought by ze Germans in 1998 to form DaimlerChrysler AG, then it went independent in 2007 under the name Chrysler LLC before being retitled once again as Chrysler Group LLC in 2009. And now the automaker headquartered in Auburn Hills, MI, is getting yet another new name. Announced today and effective immediately, the company formerly known as Chrysler will now be called FCA US LLC. That's a lot of letters, but they make a lot of sense, too: FCA stands for Fiat Chrysler Automobiles, the US telling us this is the company's American division and the LLC tells us it's a limited liability company – a legal classification similar to (but not quite the same as) a corporation. The announcement comes shortly after the company decided to phase out its long-serving Pentastar logo. The sum total is that the once-independent industrial giant is now formally part of a larger European parent company, owned by Fiat and (for taxation purposes, anyway) based in the Netherlands. What the company formerly known as Chrysler wants to emphasize, however, is that FCA US LLC will remain based in Auburn Hills and retain its "holdings, management team, board [and] brands." Chrysler Group LLC Announces New Company Name: FCA US LLC U.S.-based Automaker's New Name Aligns With Global Parent December 16, 2014 , Auburn Hills, Mich. - Chrysler Group LLC, the Auburn Hills, Michigan-based automaker, today announced that it has changed its company name to FCA US LLC. The name change is effective immediately and follows the naming convention of its global parent company, Fiat Chrysler Automobiles N.V. (FCA), which officially adopted its new name in October when it listed on the New York Stock Exchange. The name change to FCA US LLC does not affect the company's headquarters location in Auburn Hills, Michigan, its holdings, management team, board or brands. FCA US, together with parent FCA, continues to work toward the business plan presented on Investor Day in May 2014. Additionally, the Company remains proud of its joint heritage. FCA US continues to build upon the solid foundations first established by Walter P. Chrysler in 1925 as well as a rich Fiat heritage that dates from 1899. FCA US employs more than 77,000 employees worldwide, with 96 percent of its workforce based in North America.

Here's what the UAW will be angling for in next year's contract negotiations

The United Auto Workers union is about to enter a new round of negotiations with the Detroit Three automakers, and this time, the focus is on the end of the two-tier wage system. Introduced in 2007, the two-tier wage system was enacted to allow General Motors, Ford and Chrysler to categorize its hourly employees under two categories: Tier 1 for veteran employees with full rights and benefits, and Tier 2 for short-term or entry-level employees compensated under a different schedule. The idea was that the system would permit the automakers to invest more in their plants and hire new employees as part of their respective recovery plans without being saddled with all the costs associated with hiring full-time employees. Now that the automakers are (more or less) back on their proverbial feet, however, the UAW wants to see an end to the two-tier system, and will likely make that a center-point of its negotiations next year to replace the current arrangement that is scheduled to end in September 2015. Not all members of the UAW will necessarily be interested in ending the two-tier system, however. According to The Detroit News, some Tier 1 workers may be more interested in negotiating a raise in their hourly rate – something which they haven't received in almost a decade. Tier 2 workers, meanwhile, may be more motivated to keep the tiered system in place, as their arrangement includes provisions for profit-sharing payments that have seen the automakers pay out billions to so-called short-term employees in lump-sum payments. Reconciling the two competing demands from two categories of union members and presenting a united front in negotiations may prove the biggest challenge for the UAW's new president, Dennis Williams. And with the right to strike – something which was suspended during the last round of negotiations in 2011 – the union has a bigger bargaining chip in its pocket.

10 automakers shack up in Detroit hotel to talk Takata airbags

Since Takata has decided not to take the lead concerning potential issues with its airbag inflators, the automakers have. Perhaps that's unsurprising, since it's the automakers, not Takata, that will take a beating on the dealership floor if consumers decide its models are a health hazards. The Detroit News reports that Toyota, Honda, General Motors, Ford, Chrysler, Mazda, BMW, Nissan, Mitsubishi and Subaru met in a hotel conference room near the Detroit Metropolitan Airport last week to sort out a way to understand the technical issues involved. So far, faulty airbag inflators have been ruled the cause of five deaths and 50 injuries around the world, but neither Takata nor investigators understands exactly why the inflators are malfunctioning. The National Highway Traffic Safety Administration recently asked Takata to issue a national recall, Takata declined, citing a minuscule failure rate and the fact that it's still investigating the issue. Toyota and Honda then made an industry-wide appeal for "a coordinated, comprehensive testing program" that would pinpoint the problem inflators and get them replaced, and that's what the Detroit meeting was about. Numerous issues, however, will make this a long row to hoe: simply getting the parts to replace the nearly 20 million inflators in cars recalled around the world so far - even working with other suppliers - will take a years, but more importantly, no one knows if the replacement inflators currently being installed will suffer the same issue. Answers will hopefully come quickly with Takata, the ten automakers and NHTSA all independently investigating the problem.

Takata airbag recall claims 209k Chrysler, Dodge vehicles

Chrysler is expanding the scope of its front passenger side Takata airbag inflator recall yet again to include 139,115 additional vehicles for a total of 208,783 units now needing these parts replaced. The latest campaign affects the passenger side inflators of the 2003-2005 Dodge Ram 1500, 2003-2005 Dodge Ram 2500, 2003-2005 Dodge Ram 3500, 2004-2005 Durango; 2005 Dakota pickup; 2005 Dodge Magnum and 2005 Chrysler 300 (pictured above), 300C and SRT8. It's limited to vehicles purchased or ever registered in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, Texas and the territories of American Samoa, Guam, Puerto Rico, Saipan and the US Virgin Islands. The company expects owners to be notified by February 8. The automaker just expanded the replacement campaign last week to include passenger side inflators in 149,150 pickups from the 2003 model year. However, the parts are not the same. Chrysler says this recall is for the PSPI family of components versus SPI for the last one. The company is also not aware of any injuries or accidents in its vehicles from these potentially faulty inflators, and lab testing of 600 of them finds no issues. Despite this, Chrysler is repairing these models at the request of the National Highway Traffic Safety Administration. Scroll down to read the company's full announcement of the initiative. Statement: Air-bag Inflator (Regional Field Action Expansion) December 12, 2014 , Auburn Hills, Mich. - Chrysler Group is expanding an ongoing regional field action with a recall to replace front passenger-side air-bag inflators in an estimated 208,783 older-model vehicles originally purchased or ever registered in seven U.S. states and five territories. The vehicles are equipped with front passenger-side air-bag inflators from a product family code-named "PSPI." Chrysler Group is unaware of any injuries or accidents involving PSPI inflators of the type covered by this campaign, nor has a Chrysler Group investigation identified a defect in these components. Further, laboratory tests on nearly 600 such inflators did not result in any failures. The inflators affected by this campaign differ in design and construction from PSPI inflators used by other auto makers. They also benefited from a more robust manufacturing process. However, at the request of the National Highway Traffic Safety Administration (NHTSA), Chrysler Group is expanding its replacement action beyond its original scope of Florida, Hawaii, Puerto Rico and the U.S.