1967 Chevrolet Chevelle Ss Convertible Pro Tourning Clone on 2040-cars
Richmond, Virginia, United States
Everything on this Chevelle has been has been replaced or refurbished. This includes: Rebuilt 454ci 4 speed muncie transmission 12 bolt chevy posi rear all bushing and suspension components 4 wheel power disk brakes new chrome and stainless trim gas tank and lines Power steering like the original SS big block Firestone Red line tires with rally wheels Custom auto sound radio with usb port. The underside has been cleaned and painted and doesn't show any signs of rust. If the floor has been replaced it was done professionally along with other body panels. I purchased this car in Florida 1 1/2 years ago after it had been restored and I have driven it less than 1000 miles. Since I own an upholstery shop I completely changed the interior to custom black glove leather. I don't like the cheap aftermarket material. The convertible top and boot have been replace The body is straight with new paint. The car drives great and I have enjoyed it. I encourage you or your representative to come inspect the car. A lift will be made available. There is no warranty expressed or implied. If you have any Questions please give me a call. (804) 627-1193 Thanks John |
Chevrolet Chevelle for Sale
1968 chevelle
1970 chevelle ss 454 ls5
1972 chevy chevelle 2door hardtop 350 4-bolt main 4-speed 12-bolt posi rear 3:73(US $17,500.00)
1970 chevrolet chevelle ss 396 automatic w/cowl hood survivor with 37,158 miles(US $24,500.00)
1965 chevy chevelle malibu ss
1967 chevy chevelle ss tribute with 454 motor, 400 tranny, 12 bolt posi etc.(US $27,900.00)
Auto Services in Virginia
Wrenches on Wheels ★★★★★
Virginia Tire & Auto ★★★★★
Transmissions of Stafford ★★★★★
Shorty`s Automotive Inc ★★★★★
Shell Rapid Lube ★★★★★
Salem Car Shop Inc ★★★★★
Auto blog
GM executive chief EV engineer says reducing cost of plug-in vehicles is 'huge priority'
Mon, Mar 17 2014As we know, another major automaker investing heavily in electrified vehicles is General Motors, and it's doing things much differently than rivals BMW, Ford or Nissan. The Chevrolet Volt extended-range EV is a modest seller at its $35,000 sticker price but a huge hit with owners. The Chevy Spark BEV, still in limited availability, puts smiley faces on its owners and drivers. The just-introduced Cadillac ELR, a sharp-looking, fun-driving $76,000 luxocoupe take on the Volt's EREV mechanicals, has admittedly low sales expectations. With this interesting trio in showrooms and much more in the works, the third vehicle electrification leader I collared for an interview at Detroit's North American International Auto Show (see #1 and #2) was Pam Fletcher, GM's executive chief engineer, Electrified Vehicles. ABG: Why do your EREVs need four-cylinder power to extend their range when BMW's i3 makes do with an optional 650 cc two-banger? "We designed [the Volt and the ELR] to go anywhere, any time" - Pam Fletcher PF: I get that question all the time: why not something smaller? You don't really need that much. You use the electric to its ability, then you just need to limp. But we designed those cars to go anywhere, any time, and we don't want their performance to be compromised. If you're driving through the mountains, we don't want you to be crawling up grades, or to be limited on any terrain. So it's optimized to be able to travel literally the biggest grades and mountain roads around the globe at posted speeds. Because what if you can't? Another good reason: when the engine is on, you have to run it wide open throttle, max speed, most of the time. And while we can do a lot with acoustics, and the ELR has active noise cancelation, a small-displacement, low cylinder-count engine at high speed, high load all the time isn't something you want to live with. That's how we came up with the balance we did among the key factors of performance, NVH [noise, vibration and harshness] and range. ABG: Where you go from here? Is the range-extender engine due for an update? PF: We know and love the current Volt, and there is still a lot of acclaim about it, so we think it's a good recipe. But we are heavily in the midst of engineering the next-generation car, which I think everyone will love and be excited about.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.
2014 Chevrolet Corvette Stingray Convertible is a Swiss hit
Mon, 04 Mar 2013We've just received an early peek at the 2014 Chevrolet Corvette Stingray Convertible here at the Geneva Motor Show. General Motors was kind enough to let us attend the final dress-rehearsal for its press conference scheduled for tomorrow's opening media day, and we've come away with a good look at the droptop C7 in person.
In the metal, the new Corvette Convertible seems somehow less avant-garde than the Coupe, even in Z51 Performance Package guise. That's not necessarily a bad thing - more of an observation. That initial impression may be because the C7's new greenhouse is one of its most prominent departures from Corvettes past. While we didn't get to see the top erected, there's no rear side window in the stock images that Chevy has already released, suggesting the C7 convertible's profile will look a lot like its C6 predecessor. And with the new power tonneau cover in place, there are also no rear ducts that come as part of the Z51 package (they've been moved under the car).
As with its predecessor, the tonneau is a handsome double-bubble piece, and the body-color "waterfall" element into the cabin between the seats has made it to the new model as well. Thus, the overall look with the top down should be a bit more familiar to prior-gen C6 owners - if you're one of those put off by the C7's new shape, you'll probably appreciate the convertible bodystyle more than the coupe.