Cadillac STS, page #13

Cadillac STS Price Analytics

About Cadillac STS

Auto blog

Junkyard Gem: 1998 Cadillac Catera

A decade or so after Ford tried to swipe some US-market sales from European luxury marques by selling the German-built Ford Scorpio with Merkur badging, General Motors opted to sell the German-built Opel Omega luxury sedan as a Cadillac. The Catera was a reasonably nimble rear-wheel-drive sedan with a 200-horse DOHC V6 engine, and its badge-engineered nature made it a much less costly gamble than, say, the Cadillac Allante, which had its bodies built in Italy and flown to Michigan for assembly. Unfortunately, it had no manual transmission option, and Americans who remembered the miserable US-market Opels of the 1970s were put off by the Catera's Opelness. Its $29,995 list price was quite a bit cheaper than that of the (slightly less powerful) $39,800 BMW 528i and a bit less than the (slightly more powerful) $33,585 Acura 3.2 TL's cost, but the Catera didn't sell in large numbers. This one made it to a respectable mileage figure, and the nice interior shows that it was well-cared-for during its 18 years on the road. The ads for the Catera featured a cartoon duck named Ziggy. Fast, fun, fiendishly flexible! By 2000, Cadillac had ditched the duck and was touting the Catera's value. Related Video:

Jeff Gordon will come out of retirement to race new Cadillac endurance racecar

Jeff Gordon is not a man who takes well to retirement, apparently. That's not a surprise at all, given that we've been talking about his return to racing since almost the minute he retired in the first place. This year, he's taken the wheel for Dale Earnhardt, Jr., who is recovering from a concussion, several times already. So we shouldn't be too surprised to find out he's officially coming out of retirement – the twist is that it won't be in a stock car. Gordon has signed onto Wayne Taylor Racing, Motorsport.com reports, and he'll join Ricky and Jordan Taylor as well as Max Angelelli. Their ride will be the newly-revealed Cadillac DPi-V.R racer, a Dallara-chassis car powered by a 6.2-liter pushrod V8 loosely related, Cadillac claims, to the engine in the current CTS-V. You can read all about the DPi-V.R right over here. Remember, Gordon has a total of 93 NASCAR wins to his name, as well as four titles. He knows his way around Daytona pretty well, too, having won the 500 three times. He's also dabbled in endurance racing once before, in the 2007 24 Hours of Daytona with Taylor, Angelelli and Jan Magnussen in a WTR Riley-Pontiac car. They ended up on the podium, so you can say Gordon's inaugural and only outing in endurance racing so far was a success. It's been a decade, so we'll see if he's rusty, although knowing about how competitive champions are, we think he'll blow out the cobwebs and get right down to work. You can read Gordon's statement over at his personal site. Related Video:

Cadillac is returning to endurance racing with a new prototype in 2017

In two months, Cadillac will return to top-tier endurance racing with its all-new Daytona Prototype International racecar after 14 years away. The car, which adheres to IMSA's new DPi regulations, looks as long, low, and Cadillac-like as anyone could have hoped. It's set to debut at the Rolex 24 at Daytona and will compete head to head with the likes of Mazda and Nissan in what is shaping up to be one of the most diverse and exciting forms of American motor racing in years. The new car will be run by Wayne Taylor Racing, the team that previously fielded the Corvette Daytona Prototype. Wayne Taylor himself has won the 24 Hours of Daytona twice, in 1996 and 2005. He now manages the team and leaves the driving duties to his two sons, Ricky and Jordan. They'll be joined in the cockpit by Max Angelelli, Wayne Taylor's teammate in 2002 at Cadillac's last unsuccessful attempt at endurance racing. To understand Cadillac's new car, officially called the DPi-V.R., you need to understand IMSA's DPi category. Basically, manufacturers are allowed to base their car on one of four chassis that follow the FIA LMP2 regulations. The chassis come from either Dallara, Onroak Automotive, ORECA or Riley/Multimatic. Cadillac will base their car on the Dallara platform. The DPi regulation differ from the LMP2 in two major ways: non-standardized engines and the ability to change certain parts of the bodywork. The DPi regulations are intended to give the variety of the top-tier LMP1 cars at a fraction of the cost. When it came to choosing an engine, Cadillac wanted to power the new car with something kinda sorta production based. The new car will use a naturally aspirated 6.2-liter pushrod V8 that shares some base architecture with the engine in the current CTS-V. While the power output hasn't been announced, expect about 600 horsepower. While that's down compared to the CTS-V, there is far less mass to move around as the Dallara chassis is a svelte 2,050 lbs. Since all the teams will be running different engine configurations, expect restrictors of some sort to help balance the power disparity. The parts of the body work that can be modified - The nose, sidepods, rear wheel arches and rear valance - have all been designed to mimic Cadillac roadcar design elements. Even the wheels look like they were pulled straight from the CTS-V. The front splitter, the floor, and the diffuser are common elements shared with other DPi cars.

2017 Cadillac CT6 Plug-in Hybrid is the most efficient and torquey CT6 of all

Cadillac is returning to the hybrid game after discontinuing the ill-fated ELR, this time with an existing car and a new drivetrain. The company has taken its CT6 flagship and given it a turbocharged 2.0-liter four-cylinder, a pair of motors, and a big battery pack. The result of this combination is a CT6 that manages a rating of 65 MPGe, can go 30 miles on a full electric charge or 400 miles combined with the engine. The powertrain produces 335 horsepower and 432 lb-ft of torque. That's the same amount of power as the 3.6-liter V6 CT6, and more torque than that engine or the twin-turbo 3.0-liter V6. Cadillac claims the CT6 plug-in is capable of hitting 60 miles per hour in 5.2 seconds and reaching a top speed of 150 mph. The green and grunty CT6 plug-in will be available this coming spring, and it will have a premium price of $76,090. Cadillac says that its equipment list is comparable to the CT6 Premium Luxury trim level, which starts at $64,590 with the 3.6-liter V6, and $68,590 with the twin-turbo V6. However, in addition to the hybrid powertrain, Cadillac throws in a number of features that are options on the conventional gasoline models. To get the hybrid's rear seat infotainment system and enhanced night vision, a buyer would have to add $5,800 in option packages. That still leaves the twin-turbo model $1,700 shy of the hybrid, but that's not a terrible trade for the option of fuel-free driving for at least some of the time. Related Video: Featured Gallery 2017 Cadillac CT6 Plug-in Hybrid View 15 Photos Image Credit: Cadillac Green LA Auto Show Cadillac Hybrid Luxury Sedan cadillac ct6 2016 LA Auto Show

Semi-autonomous Cadillac CT6 has Batman's seal of approval

Earlier this year, Cadillac pushed the launch of its Super Cruise semi-autonomous technology back to 2017, but it looks like the automaker is still hard at work testing the system on its vehicles. Our photographers snapped a CT6 sedan with what appears to be the Super Cruise technology in broad daylight. The CT6 in the pictures, ignoring the massive equipment on the car's roof, appears to be stock. The barely camouflaged vehicle has more sensors on the front fascia and a black rear bumper, but other than those points, looks normal. Getting back to the massive piece of equipment on the CT6's roof. There's no way to definitively state what it is, but there appears to be four cameras on the corners of the rack. A sensor or camera is also fitted to the right side mirror, which is slightly camouflaged. With all of the wires from the roof going into the vehicle, there's a chance that the massive blacked-out piece of equipment on the roof could be used to gather data. While the equipment looks extremely scientific, someone at Cadillac must have a sense of humor, or be a huge fan of DC Comics, as a Batman's logo is prominently displayed on the roof-mounted gear. Cadillac announced its Super Cruise semi-autonomous technology two years ago. The system will be able to speed the car up, keep the vehicle in its lane, and slow it down. The goal, in 2014, was to introduce the technology in two years (2016), but the automaker delayed the tech until 2017. Related Video: Featured Gallery Cadillac CT6 Super Cruise Spy Shots View 13 Photos Image Credit: Spied Bible / Brian Williams Design/Style Spy Photos Cadillac Technology Autonomous Vehicles Luxury Sedan cadillac ct6 Super Cruise

GM struggles to sell small cars, plans to lay off 2,084 employees at two plants

Due to low demand for some of its vehicles, General Motors plans to cut 2,084 jobs at its assembly plants in Lordstown, OH and Lansing, MI. At the same time, the automaker also announced plans to invest approximately $900 million in three of its facilities – the Toledo Transmission Operations in Ohio, Bedford Casting Operations in Indiana, and Lansing Grand River in Michigan - for future products. GM will discontinue the third shift at both the Lansing Grand River plant and the Lordstown, OH plant. The Cadillac ATS, Cadillac CTS, and Chevrolet Camaro are made at the automaker's plant in Michigan, which currently has 2,700 employees. The move to eliminate the third shift affects 810 hourly workers, as well as 29 salaried employees, starting on January 16th. The plant in Lordstown, OH currently has 4,500 employees and makes the Chevrolet Cruze sedan. The plan to discontinue the third shift will affect 43 salaried workers and 1,202 hourly employees and will start on January 23rd. As Fortune points out, sales of the Cruze are down 20 percent through October, while sales of the Cadillac ATS and CTS were down 17 percent through the same period of time. In addition to cutting the third shift at both assembly plants, the automaker plans to invest a total of $900 million between three of its facilities for unnamed future products. GM's Toledo Transmission Operations will receive $667.6 million, the Lansing Grand River Assembly plant will receive $211 million, and the automaker's Bedford Casting Operations will get $37 million. Last year, GM cut roughly 500 jobs from its Orion Township factory due to slow sales of the Chevrolet Sonic and Buick Verano, with surging crossover and SUV sales as the most likely culprit. With GM posting much healthier sales figures for the Chevrolet Equinox and Cadillac XT5 compared to the ATS, CTS, and Cruze, it looks like compact SUVs are to blame for this year's layoffs as well. Related Video: News Source: Fortune, General MotorsImage Credit: REUTERS / Rebecca Cook Hirings/Firings/Layoffs Plants/Manufacturing Cadillac Chevrolet GM Coupe Sedan Lordstown Ohio

Our interview with Jeremy Clarkson and James May, plus SEMA! | Autoblog Podcast #491

This week, David Gluckman and Mike Austin talk SEMA madness, mis-aligned steering wheels, wireless charging, McLarens (they're sports cars!), and decals. We also have an excerpt from a recent interview with James May and Jeremy Clarkson of The Grand Tour and Top Gear fame. As always, we talk about a variety of cars we've been driving and then respond to some questions from listeners. And as a bonus, there's a trivia question mixed in. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want questionable buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. Oh, and please send trivia questions! You'll get the honor of stumping your fellow listeners, and we'll thank you too. Autoblog Podcast #491 The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics and stories we mention Stars Selling Cars The Ford Flex is dying SEMA! Dodge Durango Shaker concept New Mercedes inline-six engines Our interview with Jeremy Clarkson and James May Mercedes-Benz E-Class McLaren 570S Ad of the Week: Volvo ABCs of Death Spend My Money on used cars Rundown Intro - 00:00 The news - 02:15 Clarkson/May interview excerpt - 17:12 What we've been driving - 21:12 Ad of the Week - 39:02 Spend My Money/listener questions - 44:13 Total Duration: 57:05 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show in iTunes Celebrities Podcasts SEMA Show Cadillac Dodge Ford McLaren Mercedes-Benz Volvo ford flex the grand tour mclaren 570s SEMA 2016

Consumer Reports no longer recommends Honda Civic

Consumer Reports annual Car Reliability Survey is out, and yes, there are some big surprises. First and foremost? The venerable publication no longer recommends the Honda Civic. In fact, aside from the walking-dead CR-Z and limited-release Clarity fuel-cell car, the Civic is the only Honda to miss out on CR's prestigious nod. At the opposite end there's a surprise as well – Toyota and Lexus remain the most reliable brands on the market, but Buick cracked the top three. That's up from seventh last year, and the first time for an American brand to stand on the Consumer Reports podium. Mazda's entire lineup earned Recommended checks as well. Consumer Reports dinged the Civic for its "infuriating" touch-screen radio, lack of driver lumbar adjustability, the limited selection of cars on dealer lots fitted with Honda's popular Sensing system, and the company's decision to offer LaneWatch instead of a full-tilt blind-spot monitoring system. Its score? A lowly 58. The Civic isn't the only surprise drop from CR's Recommended ranks. The Audi A3, Ford F-150, Subaru WRX/STI, and Volkswagen Jetta, GTI, and Passat all lost the Consumer Reports' checkmark. On the flipside, a number of popular vehicles graduated to the Recommended ranks, including the BMW X5, Chevrolet Camaro, Corvette, and Cruze, Hyundai Santa Fe, Porsche Macan, and Tesla Model S. Perhaps the biggest surprise is the hilariously recall-prone Ford Escape getting a Recommended check – considering the popularity of Ford's small crossover, this is likely a coup for the brand, as it puts the Escape on a level playing field with the Recommended Toyota RAV4, Honda CR-V, and Nissan Rogue. While Ford is probably happy to see CR promote the Escape, the list wasn't as kind for every brand. For example, of the entire Fiat Chrysler Automobiles catalog, the ancient Chrysler 300 was the only car to score a check – there wasn't a single Dodge, Fiat, Jeep, Maserati, or Ram on the list. That hurts. FCA isn't alone at the low end, either. GMC, Jaguar Land Rover, Mini, and Mitsubishi don't have a vehicle on CR's list between them, while brands like Mercedes-Benz, Volvo, Nissan, Lincoln, Infiniti, and Cadillac only have a few models each. You can check out Consumer Reports entire reliability roundup, even without a subscription, here.

Why Cadillac is willing to lose 43 percent of its dealers

Cadillac is offering about 400 dealers in the United States a lump sum of money to close down. That represents over 40 percent of Cadillac dealers in America. Offers start at $100,000 and top out at $180,000. The average offering is around $120,000. According to Automotive News, Cadillac chief Johan De Nysschen estimates it will cost the automaker around $50 million to close these dealers. Any dealer that chooses to remain open will have to submit to Cadillac's ambitious Project Pinnacle, which will divide dealers into incentive categories based on how many units they sell. "Every single Cadillac dealer will have the potential to earn significantly higher profits than they do today," says De Nysschen. Dealers have until November 21 to decide if they want to take the cash or submit to Project Pinnacle. A logical question: Why is Cadillac willing to spend $50 million to close down 43 percent of its dealers? First, GM's luxury brand has way more dealerships than it needs. Second, the 400 dealers with offers to shutter each sold 50 or fewer vehicles in 2015, representing just 9 percent of its sales volume in America. So, while closing these smaller dealerships may have a small initial impact on sales, it's not going to be a major hit to Cadillac. Related Video: News Source: Automotive News - sub. req.Image Credit: Gary Cameron / Reuters Cadillac Car Dealers Luxury Performance

Our favorite mid-engine Corvette theories and rumors

The mid-engine Corvette! We just saw blurry photos through the foliage, and are hearts are all aflutter because it means that this car is real. And it's the most " never before" Corvette since 1984. Which leads us to all kinds of wacky theories and speculation. Everybody knows something or heard from a guy. None of those guys (or gals) from GM are talking to Autoblog, to be clear. But that won't stop us from stirring the pot. Let's go over a few point-by-point. The pushrod engine will be replaced by an overhead-cam V8 Car and Driver has repeatedly reported that an overhead-cam engine will come after the mid-engine Corvette's debut with an old-school pushrod. We've heard the same thing firsthand, albeit from a source with no connection to the development of the Corvette or powertrain. "At some point two valves can't pass future emissions regulations," said the guy we know. While the pushrod engine is compact, the design makes it difficult - if not impossible - for sophisticated variable valve timing (and lift) systems that control combustion with more precision. Hasty conclusion: The pushrod engine has a finite life in front of it. This one's a lock, it's a just a matter of when. Bowling Green's new paint shop is really the mid-engine assembly line Credit to Reddit for this one. Like we said, everybody knows a guy. But let's look deeper. The new paint facility costs $439 million dollars and adds 450,000 square feet, almost half the size of the existing plant. Plus GM announced another $290 million in upgrades at Bowling Green Assembly. That sure sounds like a lot of money, but you can actually spend that much on a paint booth. Porsche spent 500 million Euros (about $561 million dollars) to add the Macan assembly to its Leipzig, Germany plant in 2014. Chrysler shelled out $850 million for a paint shop in Sterling Heights, Michigan. GM spent $600 million for a new paint shop at the Fairfax (Kansas City) plant. Honda, on the other hand, is working on a thrifty $210 million project in Marysville, Ohio that includes a 300,000 square foot expansion, and the low-volume Acura NSX facility only cost $70 million. Hasty conclusion: The square footage and cost could easily mean a new assembly line instead of (or in addition to) a paint line. And if the NSX plant was really that cheap, GM could have hidden a similar sum in its existing announcements.