Blog

Car dealers, factories and ports close in the path of Hurricane Florence

Hurricane Florence has caused CarMax to close four stores in North Carolina, South Carolina and Virginia. The closed locations are in Myrtle Beach, Charleston, Winterville and Virginia Beach. It is possible for the company to close more stores, reports Automotive News. Daimler and Volvo have also shuttered their manufacturing facilities in the region to prepare for Florence. The storm is expected to reach North Carolina and South Carolina today or tomorrow. Automotive News says every coastal car dealer it reached on Tuesday was closing, and others not in the projected landfall area were monitoring the situation. There are approximately nine million vehicles in operation in the area that Florence is expected to hit, with a vehicle density of 162 vehicles per square mile. It is likely that not as many vehicles will be lost as during hurricanes Harvey and Irma, as population is less dense; areas affected by those storms had over 300 vehicles per square mile. The chief economist of Cox Automotive told Automotive News that some 20,000 to 40,000 vehicles could end up flooded if Florence keeps its path; however, recent reports have indicated Florence has weakened to a category 2 hurricane on Thursday. Tesla has again unlocked more range for some of its older models to make evacuation easier; the same was done a year ago in preparation for Hurricane Irma. As well as automotive manufacturers and dealers, automotive transport providers are readying for the storm and clearing cargo away. The container and auto terminals at Port Charleston will be closed from Thursday to Saturday, affecting part shipments to the BMW manufacturing facility in Spartanburg; BMW's spokespersons have said no production disruption is expected. Parts are delivered via railroad to Spartanburg by Norfolk Southern, which is also suspending operations for the time being. Vehicle hauler United Road has moved its rigs to safer regions and suspended deliveries, and car carrier vessels are trying to make it away from the storm's path in time. Related Video: News Source: Automotive NewsImage Credit: NASA via Reuters Auto News Plants/Manufacturing BMW Mercedes-Benz Volvo Car Buying

Japan may aid carmakers facing U.S. tariff threat

TOKYO — Japan is considering giving carmakers fiscal support including tax breaks to offset the impact from trade frictions with the United States and a sales-tax hike planned for next year, government sources told Reuters on Wednesday. Going into a second round of trade talks with the United States on Sept. 21, Japan is hoping to avert steep tariffs on its car exports and fend off U.S. demands for a bilateral free trade agreement that could put it under pressure to open politically sensitive markets, like agriculture. "If the trade talks pile pressure on Japan's car exports, we would need to consider measures to support the auto industry," a ruling party official said on condition of anonymity because of sensitivity of the matter. The auto industry accounts for about 20 percent of Japan's overall output and around 60-70 percent of the country's trade surplus with the United States, making it vulnerable to U.S. action against Japanese exports. Japan's biggest automakers and components suppliers fear they could take a significant hit if Washington follows through on proposals to hike tariffs on autos and auto parts to 25 percent. Policymakers also worry that an increase in the sales tax from 8 percent to 10 percent planned for October 2019, could cause a slump in sales of big-ticket items such as cars and home. Prime Minister Shinzo Abe has twice postponed the tax hike after the last increase from 5 percent in 2014 dealt a blow to private consumption, which accounts for about 60 percent of the economy. To prevent a pullback in demand after the tax hike, the government may consider large fiscal spending later when it draws up its budget for next year, government sources said. "One option may be to greatly reduce or abolish the automobile purchase tax," one of the government sources said. The government is also considering cuts in the automobile tax and automobile weight tax to help car buyers, the source added. Reporting by Izumi Nakagawa and Tetsushi KajimotoRelated Video: Image Credit: Getty Government/Legal Isuzu Mazda Mitsubishi Nissan Subaru Suzuki Toyota Trump Trump tariffs trade

Jaguar Land Rover CEO: Wrong Brexit deal will cost thousands of UK jobs

BIRMINGHAM, England — The wrong Brexit deal could cost tens of thousands of jobs, the boss of Britain's biggest carmaker Jaguar Land Rover warned on Tuesday, saying he had no idea whether his plants would be able to operate after Britain leaves the European Union next year. Ralf Speth also said that the company would not be able to build cars if customs checks meant that the motorway to and from the southern English port of Dover, which is used to transport components, becomes a "car park" due to snarl-ups of people no longer able to move freely among EU countries. Speth made the warning at a conference in Birmingham, central England, speaking shortly before Prime Minister Theresa May, who is battling to have her so-called Chequers Brexit plan accepted by many in her Conservative Party as well as the EU ahead of Britain's departure from the bloc on March 29. "A thousand (jobs were) lost as a result of diesel policy, and those numbers will be counted in the tens of thousands if we do not get the right Brexit deal," warned Speth, referring to redundancies made earlier this year at the firm. "Currently I do not even know if any of our manufacturing facilities in the UK will be able to function on the 30th," he said. The boss of JLR, which built nearly a third of Britain's cars last year, also said long-standing issues around low productivity in Britain could be compounded by a Brexit agreement which made the country less competitive. "It is thousands of pounds cheaper to produce vehicles for instance in Eastern Europe than in Solihull, and what decisions will I be forced to make if Brexit means not merely that costs go up but that we cannot physically build cars on time and on budget in the UK?" he said.Reporting by Costas Pitas

VW Group plan puts Porsche in charge of a 'super-premium' division

An Automobile report looks into what's happening on the organizational and technical sides of the Volkswagen Group, and what those changes could mean for the premium brands. The wide-angle view is that Porsche appears to have been anointed to "coordinate the future activities" at Audi, Bentley, Bugatti and Lamborghini. Audi would cede Lamborghini guardianship to Stuttgart, and Ducati — via a new concern called Ducati Enterprises — would become the shepherd for VW's other Italian investments. Executives target Jan. 1, 2019, to complete the reshuffle. VW wants to save a boodle by tying up four of its five top-tier brands, and putting the one with the highest ROI in charge. Porsche, within its own house, wants to reduce expenditures by $2.3 billion per year over for four years, the savings already earmarked for improving internal processes like R&D and production. Having Porsche share those gains as well as lead development of platforms, components and future-tech strategies for the sister sports car brands could benefit everyone. In the near-term, the brands have their own plans: Bugatti CEO Stephan Winkelmann is said to want a Chiron Superleggera, a roofless and "completely reskinned" Chiron Aperta, and a track-only Chiron SS. The Superleggera could take the Chiron Sport's and Divo's Jenny Craig routines even further. The Aperta seems a natural successor to the Veyron Grand Sport, a natural evolution of the recently introduced Sky View roof, and a reskin might include numerous Divo cues. It's also said Bugatti's considering "an all-electric high-end model" in conjunction with Porsche, Rimac, and Dallara, but name one supercar or hypercar manufacturer that isn't considering a lightning-fast EV. Lamborghini, deep into work on follow-ups for the Huracan and Aventador, might get a bit of a bump with the new plan. The carbon "monofuselage" for the next V12 flagship is said to be too far developed and too complex to scrap. It puts two electric motors on the front axle, batteries in the middle, and a naturally aspirated V12 with around 770 horsepower plus another e-motor with 402 horsepower in back. The Huracan is said to get a version of the same carbon architecture at the moment, but the corporate reorganization might press pause on it. Automobile says options include continuing the Huracan/ Audi R8 twinning, but that depends on Audi saying "Ja" to a third-gen R8 with Lamborghini bones.

Bugatti says the W16's days are numbered

Bugatti's W16 engine is likely to be irreplaceable for the hypercar maker. The company's CEO Stephan Winkelmann has stated that there will not be a successor for the quad-turbocharged engine. Speaking to the Australian CarAdvice, Winkelmann said that there will not be a new 16-cylinder engine to replace the existing unit, but that the company will look further to the future. "This will be the last of its kind," said Winkelmann. "Sooner or later the legislation will force everybody to take radical steps. [...] If you want to be on the edge of advanced technology, it's important you choose the right moment to change." Currently, the nearly-1,500-horsepower engine does duty in the Chiron and the newly unveiled Divo. However, the W16, as it stands, isn't quite dead yet. Winkelmann stated that the company will do its "utmost" to keep the venerable engine alive, and that it will keep being honed further in the quest for more power, as the hypercar horsepower race is hot and heavy. Dinosaurs die hard, it seems. Still, Winkelmann is eager to push the envelope for an alternate approach, saying that the company could focus on different things than getting more power from the W16 unit. According to the CEO, if there is a hybrid powerplant or an electrified solution for future Bugattis, the powertrain needs to be more than up to the task. "If the weight of the batteries is going down dramatically — as it is — and you can reduce the emissions to a level which is acceptable, then hybridization is a good thing, but it has to be a solution that is credible for the people who are buying Bugattis today." Related Video: News Source: CarAdviceImage Credit: Bugatti Auto News Bugatti Luxury Performance Supercars

Genesis Essentia is not yet headed for production, despite some reports

As we told you a couple of days ago, Erwin Raphael, the head of Genesis North America, spoke to a gathering of Detroit media, saying of the Genesis Essentia Concept, "We are very committed to the Essentia." If adapted to a production car, he continued, it would be "a limited edition" and "a statement car." We took that quote for what it was — aspirational, a strong intent, but not greenlighted. But some in attendance heard that the show car is headed for production. Nope, not yet. Jalopnik cleared this up via a Genesis spokeswoman: "Genesis is pursuing the feasibility of Essentia — but as of now, there's no production confirmation," she said. "Some reporters may have gotten ahead of themselves based on speculation. No timelines to share at this time." But take heart. If — again if — the Essentia were to be produced, Raphael wouldn't peg numbers or prices, just that the performance EV would be more dear than any Genesis on sale right now. The standard production Genesis G90 5.0 Ultimate AWD starts at $74,350 before destination, but the Genesis site quotes an "all-inclusive price from $84,000," italics ours. So it doesn't seem unreasonable to suggest a small-batch electric coupe on a one-off platform with major OEM engineering behind it will step into six-figure territory. And though Raphael and the spokeswoman didn't offer a timeframe, Genesis boss Manfred Fitzgerald, in an earlier interview, said his team was pushing to get the electric coupe built and on the road by 2021 or 2022. So how much diluting of the concept would Genesis designers need to do to satisfy real-world prerogatives? Apparently, not much. Fitzgerald said previously that everything on the Essentia show car is "technically" feasible, although Hyundai design chief Peter Schreyer said the butterfly doors would probably be subbed out for traditional units. The best of the rest could actually make it down the line. Based on our conversation with designers Luc Donckerwolke and Sangyup Lee when the Essentia debuted at the New York Auto Show in March, we figure the pontoon fenders, knife-edge LED headlights, pushrod-like suspension, and that gorgeous quilted leather interior with the floating, full-width screen and layered 3D carbon fiber are shoo-ins. We wouldn't be surprised to see that fully transparent hood become a transparent window in a more conventional hood, and the bubble-glass canopy get more reinforcement.

2019 Maserati Levante Trofeo / GTS First Drive Review | Yes, you want the Ferrari V8

CARMEL-BY-THE-SEA, Calif. — The wine glasses are rapidly draining. It's getting late, and Maserati design chief Klaus Busse appears to be fighting a cold. Yet he can't resist sketching something on a menu to illustrate his point. The A6GCS quickly takes shape. One of the most celebrated Maseratis ever, Busse uses this beacon to reconcile the Italian marque's transition to crossovers. It's how he explains and rationalizes the Levante, a stylish SUV aimed directly at the Porsche Cayenne, BMW X6 and Mercedes GLE Coupe. The A6GCS, a rare, Pininfarina-built sports car, lives on in today's Maseratis, he argues. This includes the Levante, a handsome crossover aimed at suburban cruisers bored with the notion of German luxury. Can a brand with rich sporting heritage reconcile with evolving market trends? It must, even if the connection to a mythical 1950s racer is a bit tenuous. But a pair of Ferrari-powered V8 twins, the Levante GTS and Levante Trofeo, make that progression easier. Prodigious outputs of 550 and 590 horsepower help. They are the top-shelf Levantes. You buy them when the powerful twin-turbo V6 Levante and Levante S simply won't do. You're talking six-figure prices, decadent interiors and more than a bit of bling. Well-heeled professionals drive the Levante, which starts at $75,980 and packs 345 hp, or pony up $11,000 for the Levante S and its 424 horses. The V8 starts at $119,980 for the GTS, and the Trofeo comes in at a lofty $169,980. These buyers haven't just made it, they're likely set for life. "We're not in the boy racer clientele," Busse says. "There's a certain level of accomplishment that you feel in driving a Maserati." That's probably true. But should the Trofeo be associated with generational wealth? I'm pondering this as I pull a hard right, kick up some dirt and pull onto the Pacific Coast Highway. The ocean laps to my left as the eight cylinders unlimber and I find myself reaching 60 miles per hour with little effort. The quoted time is 3.7 seconds, which feels dead on. I cue up Corsa, the sportiest of the Levante's drive modes, one that's only available on the Trofeo. The road is winding. I fall into a rhythm as I make my way up the coast toward Big Sur. The car's selling point is the engine, but the Skyhook suspension with electronically controlled damping keeps this 4,784-pound SUV reasonably tied down and poised. The cabin is quiet, as expected for the segment, allowing for easy conversation.

Jaguar Land Rover releases a vintage-looking infotainment system for classics

Jaguar and Land Rover have a new option for owners of its older vehicles: a touchscreen infotainment system. Much like the Porsche classic infotainment head unit released a few years ago, this one tries to blend in with its interior surroundings. Five distinct designs of these "Classic Infotainment Systems" are offered in an effort to have an option that fits well with the interior of any particular car offered by Jag or Land Rover over the past few decades. Chrome and black options are available for Jaguars, while brushed aluminum and black are the choices for Land Rovers. The infotainment system has navigation with 2D or 3D maps and Bluetooth audio. Sure, you don't need to stream Spotify in a 1970s Land Rover, but now you can. Jaguar says it'll offer much higher quality sound with a 4 x 45 watt output from the single DIN head unit, but you might need to upgrade those ancient speakers to actually take advantage of it. There's no mention of satellite radio like Porsche's unit offers, unfortunately. It is a radio though, so we get both AM and FM functionality. Jaguar says it's "compatible with negative earth vehicles" (newer vehicles use negative grounding systems) and retails for $1,796 before taxes in the U.S. You can buy and have it professionally fitted at an "authorized" Jaguar or Land Rover dealer if you'd like as well. It's easy to shake your fist at such a device for classic cars, but this head unit tried hard to be an elegant piece — we're still not sure about slotting it into an old E-Type though... Here are U.S. specific model fitments: Jaguar XJ40; XJS; XJ Series 3 Sedan Land Rover Defender 90, 110; Range Rover Classic (93-96); Discovery 1 (94-98); Freelander (97-04) Related Video: Featured Gallery Jaguar Land Rover Classic Infotainment System News Source: Jaguar Jaguar Land Rover Technology Infotainment

2019 Lincoln Continental will cost as much as $5,000 more

Rumors have been swirling for months about the fate of the slow-selling Lincoln Continental amid Ford's larger plans to pare cars from its lineup in favor of trucks and SUVs. But now comes word of official order guides that show the 2019 Continental priced as much as $4,925 more than the previous year's model. That price bump brings more perks for buyers, however. According to CarsDirect, all models will get adaptive cruise control and the Lincoln Co-Pilot360 suite of safety technology, which includes automatic emergency braking, blind-spot information system and rearview camera. The base level Continental Premiere will start at $47,140, including destination fee, which is $985 more than the 2018 model. The Reserve model is where the starting price jumps $4,925 to $60,705. It adds technology like a 360-degree camera, heads-up display and park assist, plus heated rear seats and steering wheel and windshield wiper de-icer. The top-of-the-line Black Label edition starts at $71,040, an increase of $4,630, and adds 30-way adjustable seats. Those prices are considerably cheaper than comparably equipped competitors like the Audi A8 or BMW 7 Series, of course, but that value proposition hasn't so far managed to help the sedan's fortunes. Lincoln sold 12,012 models of the Continental in 2017, according to CarSalesBase.com. Sales through August were 5,677, which is more than 29 percent off the pace at this same point last year. Lincoln revived the storied Continental nameplate back in 2015 to much fanfare, but its market release in 2016 was a victim of bad timing, coming amid a rising tide of crossovers. Earlier this year Lincoln reportedly showed dealers photos of a Continental with rear-hinged suicide doors that it said it planned to manufacture, which may be an attempt to drum up interest. Jalopnik, citing unnamed sources familiar with Ford's product plans, says the Continental is likely to be killed off at the end of the run of the current model in 2020. That aligns with what a user on the Blue Oval Forums is saying, that shift changes at the Flat Rock Assembly plant near Detroit are coming and that workers have been told the Continental can be phased out of production by next summer. One supposed possibility is Ford moving production to China, though any plans to import sedans to the U.S. from there would seemingly be negated by the same Trump administration tariffs that killed plans to import the Ford Focus Active. Related Video:

Suzuki will road-test EVs in India, start production with Toyota in 2020

NEW DELHI — Japan's Suzuki Motor Corp will start testing prototypes of electric vehicles in India by October, its chairman said on Friday. "We will start road-running tests using a fleet of 50 EV prototype vehicles in India from next month in order to develop safe and easy-to-use EVs for Indian customers," Osamu Suzuki said at the Global Mobility Summit at New Delhi. The company would then launch EVs in India around 2020 in cooperation with Toyota, he added. However, Suzuki said that for EVs to become popular in India, there had to be well-developed charging infrastructure. "In this regard, we look forward to proactive leadership from the Indian government," he said. The government of Prime Minister Narendra Modi has a plan to electrify all new vehicles by 2030, a target many experts call ambitious. EVs are expensive due to the high cost of batteries which are still not manufactured in India, and carmakers say a lack of charging stations could make the proposition unviable. Suzuki, parent of India's top-selling automaker, Maruti Suzuki, would start production of lithium-ion batteries for automobiles at its plant in western India from 2020, Suzuki said. India is one of the world's fastest-growing car markets, but EV sales are negligible compared with millions of petrol and diesel cars sold every year. Suzuki said to meet India's environmental challenges, the government would have to look at hybrid and CNG (compressed natural gas) vehicles also.Related Video:

Genesis G70 about to hit showrooms, as the showrooms are being figured out

Genesis has been around as a standalone brand for a few years now, and it's just about to launch its third car: the impressive G70 sedan, which we first drove back in September 2017 and again last month. The sales process has been unclear, though, and the upstart luxury automaker is hoping to change that. Erwin Raphael, general manager for Genesis, sat down to chat with us and the rest of the media in Detroit about the brand. He cleared up the dealership strategy for the near future and even left us with some intriguing news related to the Essentia Concept. At the beginning of the year, Genesis announced it was going to ditch its Hyundai dealership digs for Genesis-specific dealers. That proved unfeasible not long after, and the brand switched to a strategy of selling the Genesis in Hyundai dealers again. Raphael explained the strategy behind that today. He says that every Hyundai dealer was offered the option to sell Genesis vehicles if they wanted. To do this, they'd need to abide by Genesis' rules. This includes the plan of having a separate facility for sales and service since the buying experience for a G90 is supposed to be vastly different than buying an Accent. Eventually, Genesis wants its cars to be out of Hyundai showrooms and within standalone dealerships. In total, about 400 dealers have accepted the Genesis offer to sell its cars and are in various stages of readiness. Raphael thinks all the dealerships will be registered and ready to sell Genesis cars by March 2019, with standalone showrooms to come later. Every version of the G70 will be on sale this month, though, so Genesis is preparing for what it expects to be its highest-volume car yet. You'll have to wait until early 2020 for the brand's first crossover, though, according to Raphael. It can't come soon enough, as Genesis continues to face sales headwinds with its all-sedan lineup in a time of sharply declining sedan sales. It sold about one-third as many cars in August as it had sold in August 2017. And Raphael hinted that we shouldn't give up on the Essentia Concept quite yet. "We are very committed to the Essentia." If adapted to a production car, it would be "a limited edition" and "a statement car," Raphael says. It would be a bold move for Genesis to come out with an electric supercar or even something like it, but we certainly wouldn't complain. For now, the brand is hoping to get back to actually selling cars, with the addition of the cheaper G70 sports sedan.

2020 Genesis G80 shows its face and more in new spy photos

The last time we saw a Genesis G80 out testing, we suspected that it was going to borrow from the GV80 crossover concept and the Essentia sports car concept. These latest shots of the midsize luxury sedan confirm our suspicions now that the car has lost a large portion of its camouflage. It's mostly down to a vinyl wrap, revealing the new grille and much of the body. Up front the car clearly has the parallel light elements and five-pointed grille of the aforementioned concepts. The grille is still enormous, but it's not nearly as tall as that of the current model, which helps make the nose look less bulky. The distinct shape also helps give the Genesis more of an identity compared with its handsome if generic-looking predecessor. Moving along the side shows another cue taken from the GV80 and Essentia: a strong character line that runs from the grille, over the hood and along the flanks. This crease arcs all the way back to the taillights, and it sits just above a shoulder line that marks where the car gets wider. The door handles sit in this shoulder line and are positioned lower than on the current car. Together, these changes help add some visual interest to the G80's sides, and also make the car look lower. At the back, it's clear the G80 will have a more sloping, fastback-like profile. It looks a bit like the hatchback shape of the Audi A7. Whether it will be a hatch or not is yet to be seen. We also get a good look at the taillights, which are quite large and share the same design as the headlights with parallel bars on each side. We can see that the edge of the trunk lid ends in a sort of pseudo spoiler, too. We expect a production model to be shown within a year, possibly two. The car looks like it's very far along in development, so it could show up relatively soon, but the company has also run into delays with models like the G70. Based on these photos, we're expecting this to be a completely redesigned car, rather than just a heavily updated version of the current one. Related Video:

2019 Mini Oxford Edition is the cheapest way to get a Mini, but only for college students, grads

Mini makes a play for young car buyers with its latest 2019 Hardtop model, the Oxford Edition. It's more on par with a new trim level, but it's a highly compelling one as it's the cheapest version of the Mini available, and it comes with even more standard features than the regular base Mini. The catch is you have to either be in college, or recently graduated, to get it. Specifically, you have to be a full- or part-time student enrolled in a 2-year, 4-year or graduate school program at an accredited college or university. You're also eligible if you've graduated from one of those programs within 12 months of buying the car. If this describes you, you can have a turbo-charged three-cylinder two-door Mini Hardtop for $20,600, or the four-door for $21,600. That's a $2,150 discount over a normal base trim Mini called Classic. Even better, the Oxford Edition is equipped much better than the Classic, with larger 17-inch wheels, heated seats and a panoramic sunroof as standard. There are even a couple more colors to pick from adding British Racing Green and Starlight Blue to the Classic's selection of red, white, black and silver. An automatic transmission is also standard, which is usually a $1,250 option on the Classic, but a manual transmission is still available. Mini says that all the features amount to a $6,900 value, though it's difficult to gauge that since features such as the sunroof aren't available on the Classic, but it's a standard feature on the roughly $26,000 Mini Signature. All-in-all, the Mini Oxford Edition is a great deal for a young buyer with a desire for a Mini. And that's easy to understand, since we've enjoyed the ones we've driven. Related Video:

Koenigsegg sees new Tesla Roadster as the 'gauntlet' thrown down

Christian von Koenigsegg, the man behind the company that holds the current record for world's fastest car, does not like to be outdone. So he did not particularly enjoy hearing the numbers regarding the forthcoming next-generation Tesla Roadster and its vaunted 1.9-second 0-60 mph time. "We kind of had our future mapped out, and then we heard about the new Tesla Roadster and its insane acceleration numbers, and we thought 'Damn, that's put the gauntlet down,'" the Koenigsegg founder and CEO told Top Gear. As he told the site, he enlisted his engineers to start running numbers, and within a couple of days, they'd figured out a solution. "The simplest way of putting it is like this: It's combining direct drive with the hybridization we have in a different format with free-valve engine technology, in a peculiar layout," von Koenigsegg said. He said the powertrain could take a car from 0-250 mph in 14 seconds "or something like this," and said he wants to make a combustion engine with a higher power density than an electric powertrain "for as long as possible." His talk about hybrids brings to mind the Koenigsegg Regera plug-in hybrid, which weighs just 3,505 pounds and puts out more than 1,500 horsepower. It does 0-62 mph in 2.8 seconds — impressive, but a full 0.9 seconds less than the Roadster's purported time. And not surprising for a company that is all about maximizing ponies, Koenigsegg likes to geek out over the details of things like the design of the 1,160-hp Agera RS engine. Could he be talking about the same vehicle as the successor to the Agera RS, rumored to be called Ragnarok? Tesla, meanwhile, unveiled said Roadster at Grand Basel in Switzerland — or rather, it showed off what appeared to be a white, empty design shell that had been shown last year at Tesla's shareholder meeting. And don't forget that the mad scientists over at Hennessey are tinkering with the 7.6-liter V8 for the Venom F5, the key to its quest to hit 300 mph. So buckle your seat belts, boys and girls: Things are about to get very fast. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: Drew Phillips Green Tesla Koenigsegg Hybrid Performance Supercars PHEV koenigsegg agera koenigsegg regera hennessey venom f5

2019 Acura ILX gets a makeover with more standard safety features

The 2019 Acura ILX compact luxury sedan has finally been redesigned to fit the look introduced by the TLX and RDX. According to Acura, the entire nose from the A-pillar forward and the whole rear fascia have been changed. Up front the car has the pentagonal grille and angry LED lights that are Acura signatures, and they're complemented by crisply creased sheetmetal across the rest of the car. The results are a far sportier, far less anonymous machine. The car will continue to be available in normal and A-Spec versions, with the latter consisting mainly of appearance items such as 18-inch wheels, dark trim and lights, and a rear spoiler. Exterior enhancements are the primary change to the new ILX. The interior is nearly unchanged except the A-Spec has some stylish sport seats similar to those in the RDX A-Spec. Acura also says the infotainment system has been upgraded to be faster, and it has fresh graphics and Apple CarPlay and Android Auto compatibility. But this is not the system found in the completely new RDX, just an updated version of the current infotainment. The last big upgrade to the ILX is the inclusion of the complete AcuraWatch suite of safety features on all ILX models. This includes automatic emergency braking, lane-keep assist, adaptive cruise control and road departure mitigation. Aside from these changes, the ILX is still pretty much the same as the old one. Under the skin is the same naturally aspirated 201-horsepower 2.4-liter four-cylinder as the current model. It's still coupled to an eight-speed dual-clutch automatic transmission and powers solely the front wheels. The 2019 ILX goes on sale in October, but pricing has not yet been announced. Related Video:

Junkyard Gem: 1977 Mercury Bobcat

Cultural memory of the Ford Pinto, 38 years after the last new ones were sold, boils down to one thing today: the notorious "exploding Pinto" stories of the late 1970s. Yes, many Pinto jokes were told, the resale value of Pintos crashed, and few paid any attention to the fact that most of the cars sold with the fuel tank between the rear axle and the bumper — that is, just about every Detroit car made during the era — suffered from the same weakness. The Mercury version of the Pinto was badged as the Bobcat, but nobody told Bobcat jokes. Here's a '77 Mercury Bobcat 3-Door in vivid Medium Jade paint, spotted in a Denver self-service yard. The Pinto with glass rear hatch was known as the Pinto Runabout in 1977, while Mercury called this car the " Bobcat 3-door with Glass Third Door." When a car sits for years or decades in High Plains Colorado, rodents tend to nest in it. This Bobcat's air cleaner made a cozy home for our Hantavirus-carrying friends. The 1970s were the last gasp for eye-searingly green vinyl car interiors. Since the Bobcat was a luxed-up Pinto, the door panels have shinier trim than what you'd have had in a proletariat-grade Pinto. Pinto/Bobcat transmission choices boiled down to two: a four-speed manual or a three-speed automatic. Unusually for a Malaise Era Mercury, this one has the manual. Most Pintos and Bobcats came with four-cylinder engines, ranging from the 1.6-liter pushrod Kent to the 2.3-liter engine that lived on for many post-Pinto years in Ford Rangers. This car has the 2.3, rated at 89 horsepower, but the same 2.8-liter Cologne V6 that powered the Capri was available as an option in the Bobcat. That engine made a mighty 93 horsepower. These cars were not too miserable to drive by econobox standards of their time, at least when they had three pedals. You'd blow the doors off a '77 Corolla with a 4-speed Bobcat in a drag race, though the Corolla got better fuel economy. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Gives you hundreds of pounds more car than most small imports and includes standard self-adjusting rear brakes! Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Junked 1979 Mercury Bobcat View 15 Photos Auto News Mercury Automotive History ford pinto bobcat

Bentley preps 'Centennary Specification' for all models built in 2019

For the entirety of Bentley's 100th year in business, the English carmaker will adorn its products with a Centenary Specification. The package consists of unique badging with specially developed Centenary Gold badge highlights, available Centenary Gold thread for the headrest logos, contrast stitching and cross stitching, and a "centenary welcome light" outside the vehicle. The in-house craftsmen have also developed unique embroidery. Bentley says the gold hue was inspired by metalwork on vintage models like the 1919 EXP 2 (pictured, red and silver) and 1929 Birkin Blower (pictured, green), the latter one of the company's Le Mans winners driven by Sir Henry "Tim" Birkin. The hue possesses an "elegant warm tone and a deep fluid shadow." The steering wheel badge, key fob, shift knob, and wheel center caps feature the tinted ring. The "B" badge on the radiator surround also features "1919-2019" script, and that script is found on the tread plates, too. For those who don't know, eponymous founder Walter Owen Bentley's engineering career began with locomotives — which he loved more than cars at one point — and motorcycles, before settling on automobiles. He bought his first car in 1910, a French DFP, and after improving it himself, set a 10-lap record at the Brooklands circuit. In 1912 he opened a DFP franchise with his brother Horace Milner as Bentley & Bentley, and further upgraded the car with a new piston design that was 88 percent aluminum and 12 percent copper. The Royal Naval Air Service adopted Bentley's piston design and Bentley's re-designed Clerget airplane engines, dubbed the Bentley Rotary. After the war, Bentley refocused on cars, and in 1919 released the 3-Litre, which boasted features like a cross-flow head, overhead cams working four valves per cylinder, and twin plugs in each cylinder. The company delivered the first production model in 1921, then went racing and won the second edition of Le Mans in 1924. That is how Bentley began to become "Bentley, ahem ...", and here we are. Next year, on July 10, the company plans to celebrate the feat appropriately. Related Video:

Pony cars, trucks and Italian SUVs | Autoblog Podcast #552

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor Alex Kierstein and Associate Editor Reese Counts. We discuss the updated 2019 Chevy Camaro Turbo 1LE variant, the new 2019 GMC Sierra Denali, and the Ferrari-powered Maserati Levante GTS. We also debate whether Volkswagen should build the Atlas-based Tanoak pickup truck and what a delay means for the next-gen Ford Mustang. Finally, we answer a reader question about the state of Lexus.Autoblog Podcast #552 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2019 Chevy Camaro Turbo 1LE 2019 GMC Sierra 2019 Maserati Levante GTS Should Volkswagen build the Tanoak? Next-gen Ford Mustang delayed The past, present and future of Lexus Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: Podcasts Chevrolet Ford GM GMC Lexus Maserati RAM Truck Coupe SUV Luxury Performance

This GTO-El Camino mashup is the muscle truck of our dreams

There were a hell of a lot of great muscle cars in the mid-1960s, from the baroque Dodges and Plymouths of the earlier part of the decade to the wild big boys like the Boss 429 and Olds 442 W30. Right in the middle of the decade, two of the most iconic of the bunch emerged — the Pontiac GTO and second-generation Chevy El Camino. And this one is a 1964 Chevy El Camino with the heart and face of its GTO cousin, and dubbed the El Chieftain GTO. It's currently for sale at RM Sotheby's Auburn auction, with no reserve status or estimate listed. This looks like a product that Pontiac could have sold at the time — its builder, Ron Lindeman, did an excellent job making it look like a factory product, right down to the taillight strakes inspired by the GTO. It's powered by a 389 — a Pontiac motor that was actually found in period GTOs, but sporting a single four-barrel instead of the sexy Tri-Power setup. It is, however, equipped with a Hurst four-speed manual and the grille badge to prove it to bystanders. Even the interior is made up to look like a GTO. We wish there was more of a description of the build in the listing, but if you love it, do us one better and buy the thing and invite us to poke around it. We are very much in love with this muscle-truck mashup. Related Video: Featured Gallery 1964 Chevrolet El Camino "El Chieftain GTO" News Source: RM Sotheby's Pontiac Auctions Car Buying Truck Performance Classics

Why this could be the perfect time for Apple to make a car play

While the automotive and technology worlds have been pouring billions into autonomous vehicles (AVs) and preparing to bring them to market soon as shared robo-taxis, Apple has mostly sat on the sidelines. Of course, Apple is the last company to ever make its intentions known, and the super-secret tech cult giant hasn't been totally out of the AV game based on the clues that have slipped out of its Cupertino, Calif., citadel over the past few years. Related: Apple self-driving cars are real — one was just in an accident News first broke in 2015 that it had assembled an automotive development team, in part by poaching high-profile talent from car companies, to work on a top-secret self-driving vehicle project code-named Titan. (Thank you very much, Nissan.) Apple also subsequently broke cover by making inquiries into using a Northern California AV testing facility and receiving a permit to test AVs on public roads in California. But then as the AV race started to heat up in the last few years, Apple reportedly began scaling back its car activities by downsizing team Titan. More recently, Apple's car project has shown signs of life with the hiring a high-level engineer away from Waymo and luring one Tesla's top engineers and a former employee back to Apple. It also inked a deal with Volkswagen to provide a technology platform and software to convert the automaker's new T6 Transporter vans into autonomous shuttles for employees at tech company's new campus. That is a far cry from giving rides to Wal-Mart shoppers, like Waymo is doing as part of its AV testing in Phoenix. But this could be the perfect time for Apple to enter the AV market now that ride-sharing is reaching critical mass and automakers and others are planning to deploy fleets of robo-taxis. Apple could easily establish a niche as a high-end ride-sharing service – and charge a premium – given its cult-like brand loyalty and design savvy. The growth of car subscription models could also play in Apple's favor since is already has many people hooked on paying for phones in monthly installments – and eager to upgrade when a new and better model becomes available. To achieve this, some believe Apple will fulfill co-founder and CEO Steve Job's dream of building a car. And as the world's first and only $1 trillion company it's sitting on a mountain of cash that certainly gives it the means. But other tech darlings like Tesla and Google have discovered how difficult it can be to build cars at scale.

Lego builds life-size, driving Bugatti Chiron out of Technic pieces

Lego recently introduced a Technic model of the 2018 Bugatti Chiron supercar. It's impressive on its own with a functioning gearbox and a little 16-cylinder facsimile of the real thing. But Lego decided it wanted to go even farther in creating a Technic Bugatti. It wanted to build a life-size one that actually worked and drove using just Lego parts. And it did. The final product is on display up above. It is a full-size replica of the 1,500-horsepower supercar from Bugatti, and about the only parts that aren't made from Lego pieces are the wheels, tires and the front badge. It consists of over 1 million pieces in total, weighs in at about 3,300 pounds and took over 13,000 work hours to finish. For reference, this model weighs about 1,100 pounds less than the real car. Most impressive is that even the functional parts of the car are constructed from Lego Technic components. It's powered by 2,304 Lego Power Function motors that together produce about 5 horsepower and 68 pound-feet of torque. Lego says it can go up to 12 mph. View 27 Photos It goes beyond just Lego motors, though. All of the lights, the speedometer and even the rising rear wing use actual Lego Technic parts. Even the brakes, yes, the brakes, are made of plastic Technic bits and are fully functional. Lego also says that significant structural and load-bearing parts of this model are fully made from Technic parts without any reinforcements or gluing of parts. This is quite possibly the most impressive Lego creation of all time. It would be quite cool if Lego decided to sell such a kit, though it will likely never happen. The issue would probably be size more than anything. A ton and a half of plastic isn't the easiest thing to transport or sell. The price of the kit might not be as bad as you would expect, though. Lego has very consistent pricing, and looking at the scale model kit of the Chiron, Lego appears to charge roughly 10 cents a piece. That would put the price of this model at a bit over $100,000. That's not cheap, but it is just a tenth the cost of a real Chiron, and in some ways it's cooler. Related Video: Image Credit: Lego Green Toys/Games Bugatti Coupe Electric Supercars Lego Bugatti Chiron

Ares Design Coupe for the Bentley Mulsanne is the grand tourer we dream about

Bentley exited the grand coupe business when it made the last of 550 Brooklands models in 2011. The UK carmaker said it will make 19 examples of the Mulsanne Grand Convertible, but that doesn't count as a coupe. So when a U.S. Mulsanne owner wanted his Bentley with a roof but a touch less four-door-y, he went to Italian coachbuilders Ares Design. And not only did Ares do the thing, they did it magnificently. The resulting two-door is called the Ares Design Coupe for the Bentley Mulsanne, and the first of them was just handed over in Beverly Hills in time for a Pebble Beach appearance. Modena-based Ares started with a three-dimensional scan of the sedan, then reworked that CAD file into the coupe they sought by changing just about everything behind the A-pillars. A reprofiled roof replaces the old one, and it falls into a new backlight and longer rear decklid. The engineers moved the B-pillars rearward to install longer front doors, and fabricated new side impact protection for the portals and rear quarter panels. New chrome surrounds on the windows maintain the look as if from Crewe. Yet because the roof and doors are made from carbon fiber, they contribute to the coupe's 992-pound overall weight loss compared to the donor four-door. Inside, Ares replaced the front seats with more rakish thrones, redesigned the interior trim panels to flow with the body style, and matched the wood and leather as if all were factory original. Under the unchanged hood, a tuned ECU means the 6.75-liter twin-turbo V8 produces more than 591 horsepower and 811 pound-feet of torque, both healthy improvements on the stock 505 hp and 752 lb-ft. Completing the transformation, the coupe sits 20 millimeters lower on "a sportier suspension." One report said that a friend of the California owner likes the car so much that a second two-door has already been commissioned. Ares charges $460,000 for the service, to start, and it takes about six weeks. And no, that price doesn't include the donor Bentley. However, that's a lot less than Bentley would charge to make the swap, since the carmaker won't make the actual car. The Italian firm said it wants to keep volumes "ultra-low," yet, "As long as [Bentley] don't make one, we will continue." Although we haven't spoken much of Ares here outside of their Tesla Model S wagon, the firm led by ex- Lotus boss Dany Bahar has kept busy in its four years of operation.

Gary Cooper's 1935 Duesenberg SSJ fetches record price at Pebble Beach

The 1935 Duesenberg SSJ formerly owned by Gary Cooper sold for a jaw-dropping $22 million over the weekend at the Gooding & Co. Pebble Beach auction, setting a record for the most valuable pre-war car ever sold at auction. It also appears to have become the most expensive American collector car ever sold at auction, eclipsing the very first Shelby Cobra ever made, which sold for $13.75 million in 2016. The Duesenberg was also the lone American-made entrant in the list of top 10 sellers, which was crowded with the names Ferrari and Porsche. You have to go all the way down the list to No. 21 to find the next American car: a 1930 Packard 734 Speedster Phaeton, which sold for a mere $1.127 million. All told, Gooding & Co. said it realized more than $116.5 million in auction sales over the weekend, with a whopping 25 cars sold for north of $1 million, an 84 percent sales rate and an average transaction price of $947,174. Clearly this is how the other half 1 percent lives. Gooding & Co. said there were five world-record sales at the auction. Joining the Duesenberg were a 1955 Ferrari 500 Mondial Series II, which sold for $5.005 million; a 1958 Ferrari 250 GT Tour de France Berlinetta, $6.6 million; a 1967 Ferrari 330 GTC Speciale, $3.41 million; and a one-of-two 1966 Ferrari Dino Berlinetta GT, $3.08 million. Oh, and that 1969 Ford Bronco test vehicle we told you about? The one that was rebadged by Holman & Moody as a Bronco Hunter? It sold for $121,000, which was well below the expected range of $180,000 to $220,000. Perhaps it was the presence of all those gorgeous Porsche Spyders and Ferraris that meant collectors weren't interested in boxy, utilitarian off-roaders. View 24 Photos Gooding and Co. had expected the convertible Duesenberg coupe to go for more than $10 million. It was one of only two of its kind built by Duesenberg — the other having gone to Clark Gable — with a specially shortened, 125-inch wheelbase and a supercharged straight-eight with double overhead cams, able to produce around 400 horsepower and a top speed of 140 miles per hour. It features a lightweight open-roadster bobtail body produced by LaGrande out of Connersville, Ind. The car was also owned at one point by race driver Briggs Cunningham.

Best in Show: 1937 Alfa Romeo 8C 2900B Touring Berlinetta wins at Pebble Beach

PEBBLE BEACH, Calif. — Well over 200 vehicles from 17 countries competed for Best in Show honors at the 2018 Pebble Beach Concours d'Elegance, but there could be only one winner: the 1937 Alfa Romeo 8C 2900B Touring Berlinetta you see above. The deep blue bodywork of the vehicle was first seen at the 1938 Berlin Motor Show, and the vehicle was recently restored to its original show condition. This Alfa Romeo is owned by David and Ginny Sydorick. "This car is one of only five built, and it has recently been completely restored, taking a huge amount of effort and dedication from all those involved," said Sydorick after the win. The '37 8C 2900B Touring finished ahead of a 1929 Duesenberg J Murphy Town Limousine and a 1948 Talbot-Lago T26 Grand Sport Figoni Fastback Coupe for the golden ribbon. This is the third time an Alfa Romeo has won the coveted Best in Show trophy at Pebble Beach, the first an 8C 2900B Touring Spider in 1988 and the second an 8C 2900B Touring Coupe in 2008. Last year's winner was a silver and blue 1929 Mercedes-Benz S Barker Tourer. Related Video: Featured Gallery 1937 Alfa Romeo 8C 2900B Touring Berlinetta: Pebble Beach Misc. Auto Shows Alfa Romeo Automotive History Coupe Luxury Special and Limited Editions Classics Pebble Beach

2019 GMC Sierra Denali First Drive Review | The more things change...

ST. JOHN'S, Newfoundland — Canadians love their GMCs. Both anecdotal and statistical evidence supports this. In certain areas of Canada, the Sierra outsells the Chevy Silverado. But in this area of Canada, Cape Spear, the morning fog and salt air are thick. This is the most eastern point in Canada, and the most eastern point of North America if you don't count Greenland. We woke up early and drove to the coast in the new 2019 GMC Sierra Denali, hoping to catch what was promised to be an absolutely spectacular sunrise. The sunrise was a no-go thanks to the fog, turning the sky into a grey mist that melted into the Atlantic. Still, if the world had an edge, this is what it would look like. Driving in an inspiring place like this invites introspection, and since we're in an GMC Sierra, why not examine the brand's place in the world? Recall that for years, a GMC showroom was just packed with slightly more expensive versions of other GM products. Badge engineering, if you will – a dirty word in our business, applied to such notable machines as the Cadillac Cimarron, Buick Terraza, Chevy Aveo and Saab 9-7X. Things, at least on the surface, seem to be changing. GMC says it's making a concerted effort to differentiate its product portfolio from the rest of GM, but the results have been mixed. The brands were supposed to have less product crossover. There's no GMC version of the Chevy Traverse and, initially, there was no Chevy equivalent of the GMC Acadia, though the new Blazer kills that advantage. The Equinox and Terrain are still basically the same vehicle, as are the new 2019 Silverado and 2019 Sierra. At least the two trucks look decidedly different. There's still a family resemblance, but most of the bodywork has been changed. Where the 2019 Silverado adopted some curves, the Sierra stuck with straight lines. Compare things like the headlights, wheel wells and doors. The Sierra still has a massive grille and — aside from the AT4 off-road trim — packs on as much chrome as a 1958 Cadillac, but that's what customers want these days. The Ford F-150 and Ram 1500 are no different in this regard, packing lots of chrome, hard edges, and frontal areas that would give passenger trains a run for their money. At first glance, you'd be hard pressed to tell the Sierra and Silverado's interiors apart from both each other and the outgoing models. It's basically the same design, though the Sierra makes do with some slightly nicer materials.

Bugatti Divo revealed, all 40 are already spoken for

After numerous teasers, the Bugatti Divo has finally been revealed. I will thus take this opportunity to type "whip it good," mention funny red conical hats and move onto something only slightly less ridiculous. The Divo cost ˆ5 million each for the 40 people who have already purchased the limited production run. So sorry, you missed your chance. The Bugatti Divo is quite obviously based on the Chiron. Though it shares that car's 8.0-liter W16 engine, it is 77 pounds lighter and is capable of producing 198 extra pounds of downforce. Basically, while the Chiron is all about top speed, the Divo is more about taking corners. To that end, its lateral g is said to be 1.6 g, which is a staggering number, and its maximum speed is limited to only 236 mph. "To date, a modern Bugatti has represented a perfect balance between high performance, straight-line dynamics and luxurious comfort," said Bugatti president Stephan Winkelmann. "Within our possibilities, we have shifted the balance in the case of the Divo further towards lateral acceleration, agility and cornering. The Divo is made for bends." The newer, wider front spoiler contributes to that extra downforce, along with a new rear diffuser and a 23-percent wider rear spoiler that remains automatically height adjustable and still functions as an airbrake. It's a whopping 6 feet wide. Tweaks up front also create an "air curtain" that optimizes air flow along the Divo's sides. Besides creating extra downforce, aerodynamic changes also increase cooling to the engine and brakes. The Divo also gets special suspension and steering settings to maximize handling. That includes increasing camber. Weight was reduced by using lighter wheels and a carbon fiber intercooler cover, along with a reduction in sound insulation, a lighter sound system and fixing the otherwise adjustable front diffuser flaps. According to Bugatti, the resulting changes result in the Divo lapping the Nardo handling circuit 8 seconds faster than the Chiron can. Its 40 owners are sure to be super impressed by that. Like the Veyron and Chiron, the Divo is named after a driver from the early years of car racing. Specifically, Albert Divo, the two-time winner of the Targa Florio in the 1920s. He did not look like this. Related Video:

Dealers mobilize to protect their margins from automaker subscription services

Six individual auto brands — Lincoln, Cadillac, Porsche, Mercedes, BMW and Volvo — have established or are trialing a vehicle subscription service in the U.S. Three third-party companies — Flexdrive, Clutch and Carma — run brand-agnostic subscription services. And three automakers — Mercedes-Benz, BMW, and General Motors — have also launched short-term rental services. Dealers, afraid of how these trends might affect their margins, are building political and lawmaking campaigns to protect their revenue streams. So far, three states are investigating automaker subscriptions, and Indiana has banned any such service until next year. It's certain that those three states are the first fronts in a long political and legal battle. Powerful dealer franchise laws mandate the existence of dealers and restrict how automakers are allowed to interact with customers to sell a vehicle. On top of that, Bob Reisner, CEO of Nassau Business Funding & Services, said, "Dealers and their associations are among the strongest political operators in many states. They as a group are difficult for state politicians to vote against." In California earlier this year, the state Assembly debated a bill with wide-ranging provisions to protect against what the California New Car Dealers Association called "inappropriate treatment of dealers by manufacturers." One of those provisions stipulated that subscription services need to go through dealers, but that item got stripped out when dealers and manufacturers agreed to discuss the matter further. In Indiana, Gov. Eric Holcomb signed a moratorium on all subscription programs by dealers or manufacturers until May 1, 2019, to give legislators more time to investigate. Dealers in New Jersey have taken their campaign to the state capitol, asking that the cars in subscription programs get a different classification for registration purposes. Automakers run the current subscription services and own the vehicles. Sign-ups and financial transactions happen online or through apps, leaving dealers to do little more than act as fulfillment centers to various degrees, with little legal recourse as to compensation amounts when they're called on to deliver or service a car. That's a bad base to build on for business owners who've sunk millions of dollars into their operations.

2019 Acura NSX gets a refresh and an eye-catching new color

After two model years and about 1,000 deliveries to the U.S., Acura's given the 2019 model a few enhancements and a small price bump. The car debuted at The Quail, A Motorsport Gathering, during the festivities surrounding Pebble Beach. While there are no major powertrain changes, some new color options and a few chassis refinements will be appreciated by NSX fans. Let's start with the hardware, since this is a sports car, after all. Most important, there's new all-season rubber, still Continental SportContacts but the next version thereof — the 6. Acura claims better handling in all conditions, and the way tire technology has been improving, we'd believe it. The optional Pirelli Trofeo Rs remain — and remain highly recommended for anyone looking to sample the NSX on track, which is an exhilarating experience. Acura says the rest of the enhancements we'll mention shaved a full two seconds off the car's time at Suzuka, so take that for what it's worth. They consist of a 26 percent stiffer front sway bar and 19 percent stiffer rear bar; 21 percent stiffer rear toe link bushings; a 6 percent stiffer rear hub; and a new software calibration for the computer controlled bits: the SH-AWD system, magnetorheological dampers, electric power steering, and stability control systems. For a car as precisely engineered as the NSX, these are relatively significant improvements. Don't necessarily expect it to shave two seconds off your personal best lap time, but if you're highly attuned to the chassis dynamics, the '19 NSX should offer more precise and direct feedback to the driver. No need to be precisely attuned to the cosmetic changes — they're pretty obvious. Thermal Orange, a new exterior color, and the chrome beak-ectomy (it's not body colored) crown the exterior changes. Inside, the leather/Alcantara combo seats are now available in blue, and the full leather seats can be had in red. While the price for the 2019 model has gone up by $1,500, Acura says that there's now $4,700 in formerly optional equipment (power seats, satnav, premium audio, parking sensors, and sport pedals) included as standard equipment. That sounds like a good deal to us. If you want one, the order books are open and cars will be delivered starting in October. Related Video:

Infiniti Prototype 10 single-seat speedster unveiled at Pebble Beach

PEBBLE BEACH, Calif. — Infiniti's new Prototype 10 takes inspiration from last year's Prototype 9 concept, but instead of minimal bodywork and open wheels, adopts the long and sinuous profile of classic speedsters of the past. And the concept's electric powertrain hints at the Japanese automaker's future. Infiniti says that all new production models from 2021 onward will have some sort of electrification, spread across pure battery-electric vehicles, parallel hybrids and e-POWER series hybrid powertrains. The overall shape of the Infiniti Prototype 10 recalls classic race cars like the 1950s-era Jaguar C- and D-Types. There's virtually zero wind protection for the single passenger, but there's a prominent headrest that incorporates a fin-shaped aero element. Air intakes are plentiful and festooned with close-set vertical bars that remind us of last year's Prototype 9 concept. There are lots of striking details in the Prototype 10's flowing bodywork. Slim, almost slit-like lights up front sit below the level of an Infiniti logo highlighted by negative space. In profile, a virtual line cuts across the vehicle front to rear. We look forward to seeing how some of these elements are incorporated into future production vehicles from Infiniti. View 17 Photos We don't have any details on what's actually powering the Prototype 10 as its sits, other than the fact that it's electric, of course. But we do know that the concept uses Infiniti's steer-by-wire Direct Adaptive Steering system. We can also see that the interior compartment is minimalist in design, clearly in an effort to keep the driver's focus firmly on the road ahead. Though much of the commentary surrounding the Prototype 10 will undoubtedly be about its radical bodywork, it may be the vehicle's chassis that is most relevant to Infiniti's production electric vehicle plans. The company describes the Prototype 10's chassis as rigid, modular and flexible with a flat floor and says such a platform would underpin its future electrified vehicles, including sedans, SUVs and sportscars. Stay tuned for more on the Infiniti Prototype 10 as we meander the remainder of Monterey Car Week here in California. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 GMC Sierra Denali and its nifty tailgate roll into dealers

We've got more details about the 2019 GMC Sierra Denali now that it's rolling into dealerships, starting with its floor price of $56,195, including destination fee, for the rear-wheel-drive models. That's a jump of $1,900 over the previous generation of its premium full-size pickup. Four-wheel-drive models start at $60,295. The crew-cab truck has grown in every dimension as well, adding about 4 inches to the wheelbase, nearly 2 inches in length and 1.2 inches in width. There's also nearly 3 inches more rear legroom. Bed options are 5-foot-8 or 6-foot-6. There are three engine options. Two are carryovers from 2018: a 5.3-liter V8 that sends 355 horsepower and 383 pound-feet of torque through an eight-speed automatic transmission, and an available 6.2-liter V8 that makes 420 hp and 460 lb-ft of torque and mated to a 10-speed automatic. Both come with GM's dynamic fuel management cylinder-deactivation technology to optimize power and fuel efficiency. A new 3.0-liter turbodiesel paired with a 10-speed automatic is expected in early 2019. The EPA hasn't yet released official fuel economy ratings, but GM estimates them at 17 miles per gallon in the city and 23 mpg on the highway for the two-wheel-drive versions, and 15/21 in four-wheel drive. The truck gets adaptive ride control which can adjust the dampers every 2 milliseconds based on real-time monitoring of the road and driver inputs for improved ride and handling. A new traction select system adjusts the transmission shift points, throttle mapping and StabiliTrak to tailor performance to different terrain or weather conditions. Inside the crew cab, there's new Forge leather-appointed seats, open-pore wood trim and dark finished aluminum decor, plus an 8-inch-diagonal HD color touchscreen with embedded navigation and Apple CarPlay and Android Auto compatibility. Most of the other new stuff we've covered before, including new C-shaped LED headlights and LED tail and fog lamps, optional 22-inch wheels, full-color head-up display, trailer-hitch assist apps and cameras, and rear-camera mirror. The truck also loses up to 360 pounds from the outgoing model via a scratch- and dent-resistant carbon-fiber bed box that replaces steel, and use of aluminum in the doors, hood and tailgate.