Ram Ram 1500, page #17

Auto blog

An inside look at Mopar's SEMA fleet

Mopar is heading to the SEMA show in Las Vegas with a fleet of customized vehicles that appeal to enthusiasts of all stripes. There's a Dodge Viper ACR concept that follows in the lineage of the supercar's great road racing past, and a custom Ram ProMaster that might just be the ultimate outdoor party machine.
We got an inside look at Mopar's cars that will be on display at the show, which also include a Dodge Challenger T/A concept, two crazy Jeeps and a Ram 2500 Outdoorsman that could change the way you camp. While these are some of our favorites, Mopar is bringing plenty to SEMA, so let us know your top choices in the comments section.

Chrysler recalling 382k Ram HD diesel pickups, 184k SUVs

Between GM's ignition switches and Takata's airbags, it's been a big year for recalls, but they keep rolling in. The latest comes from Chrysler, which has announced a pair of recalls for certain heavy-duty pickups and SUVs.
The first issue revolves around the 6.7-liter Cummins diesel engine available in the 2010-2014 Ram HD trucks, including 2500 and 3500 series pickups as well as 4500 and 5500 series chassis cabs. In the affected units, "a terminal connector near the fuel heater may be subject to friction-induced corrosion," according to the first of the two announcements from Chrysler below.
The problem could result in overheating and fuel leakage. Chrysler launched its investigation following cases of overheating, none of which actually started a fire, much less an injury or accident. As a precautionary measure, however, Chrysler is instructing service technicians to replace the terminals on an estimated 381,876 Ram units around the world - the vast majority of those (314,704) registered in the US, another 59,432 in Canada, 1,803 in Mexico and 5,937 abroad.

NHTSA probing Ram recall pace, communication

The National Highway Traffic Safety Administration has announced that it's looking into Chrysler Group's handling of a pair of recalls affecting roughly one million Ram pickup trucks. Reuters is reporting that the regulatory agency is focusing on the availability (or lack thereof) of parts and "poor communications" from the automaker in its investigation.
"Customers have been advised in accordance with the regulations governing recalls," Chrysler spokesman Eric Mayne told Reuters via email. "We are continually replenishing our supply of replacement parts. Chrysler Group regrets any inconvenience our customers may have experienced."
NHTSA disagrees, arguing that the recalls, which affect 972,000 trucks from 2003 to 2012, are being delayed by the lack of parts.

Fiat-Chrysler shows its SEMA lineup

Fiat Chrysler Automobiles already previewed its 2014 SEMA show lineup with some slick renders. Now, the automaker has finally showed us the actual cars, and among the group there are definitely some that stand out more than others.
Dodge is really showing off its muscle at this year's show with four concepts that all pump up the power of the brand's models. Perhaps most interesting among them is the Challenger T/A Concept (pictured above) in striking Sublime Green and matte black. It's meant to resemble the classic Trans Am racer from the '70s. Under the hood is a 6.4-liter V8, and to fit the vintage style there's a pistol-grip gearshift inside.
The Charger R/T also gets some attention with the Mopar concept that shows off what FCA's aftermarket performance arm can do. Mods include an updated body kit, cold-air intake for the 5.7-liter V8 and a coil-over suspension kit. Beyond that, the Dart R/T Concept looks a lot meaner with a black hood with duct work that leads straight to the air intake. The rest of the compact sedan is dolled up in O-So-Orange paint and is fitted with upgrades to improve handling like a coil-over suspension and big brake kit from the Mopar catalog.

Chrysler teases upcoming outlay of SEMA cars

Fiat Chrysler Automobiles is hauling a multitude of modified models to the annual SEMA show in Las Vegas this November, and the company is releasing the first teasing sketches of many of them.
Unfortunately, FCA isn't giving many solid details on any of the concepts other than saying the vehicles from Chrysler, Jeep, Dodge, Ram and Fiat all benefit from tuning from its Mopar performance brand. The teaser photos include a sinister-looking Chrysler 200S, Fiat 500 Abarth with two-tone paint and a scorpion on the hood, a red and black 500L, seemingly two different takes on the Jeep Renegade, a green Dodge Challenger wearing the T/A badge, an orange and black Dart, a very neon Charger, just the outline of a red and black Viper, a Ram ProMaster in Mopar livery and a Ram pickup called the Outdoorsman.
Take a look through the gallery to see what you think of the sketches for these concepts, and scroll down for the full announcement from FCA.

Ram recalling over 43k Promaster and C/V Tradesman vans for separate issues

Ram has announced that it will be recalling over 43,000 vehicles as part of a pair of campaigns targeting its two main cargo haulers, the ProMaster and C/V Tradesman.
In the case of its newer offering, the 2014 ProMaster, 21,470 vehicles are being recalled so that Ram dealers can replace the head restraints. The current restraints apparently leave too large of a gap between it and the occupant's head. Of the over 21,000 vans being recalled, nearly 19,000 are in the United States while the remaining 2,500 are in the barren tundra we call Canada.
For the old C/V Tradesman, meanwhile, its recall has been prompted by an investigation into the side-curtain and thorax airbag sensors. It was found that on vehicles lacking rear climate and audio systems in the back, a gap where these components should be could "generate a resonance" that could affect the sensors' operations. 22,115 vehicles are affected, covering model years 2013 through 2015. As with the ProMaster, the vast majority of vehicles are found in the United States, while just under 4,000 are in Canada.

Top torque-to-weight ratios under $100k, $50k and $25k

Horsepower may steal a lot of headlines, but the always-more-complex torque figure is often a critical one for both the workingman and the motoring playboy. The measure of rotational force represents the twist that can liquefy one's tires or haul one's horse trailer. Good stuff.
It follows then, that as with the horsepower-to-weight list that we assembled for you a few months ago, a list of cars that offer the most pound-feet with the fewest pounds to carry, is an interesting one to break down. Sure, there's a big difference in how the torque is applied from a turbocharged six-cylinder in a Swedish luxury sedan and a massive heavy-duty truck's turbo-diesel. But being the car/stat geeks that we are, we think it's kinda neat that those two vehicles rank near each other where torque and weight intersect.
As with the horsepower list, we've given you figures as pounds per every one pound-foot. Again broken down into broad price categories, we've got a mixed bag of 2014 and 2015 models here, too. Every effort has been made to select the most up-to-date prices and specs, and we've also to omitted some '14 cars that won't be re-upped after the ongoing yearly changeover.

Ram increasing EcoDiesel production [w/video]

The Ram 1500 EcoDiesel shot out of the gate with strong sales by filling its initial allocation of 8,000 orders in just three days, in February. At the time, Ram expected that the oil-burning variant would account for around 10 percent of 1500 output, but it knew there was room to grow if the demand was there. Apparently it is, as the truck maker is doubling the diesel's production mix for the 2015 model year to 20 percent of the pickup's total volume.
Since hitting the market, the EcoDiesel has been a smashing success, according to Ram. The company claims that nearly 60 percent of its sales have been conquests from other truck brands, and its popularity has boosted the 1500's average transaction price, as well. In an accompanying video, brand president Bob Hegbloom said that customers have been demanding more of them.
"Innovation sometimes comes with risk, but being first to market with a diesel engine for the half-ton segment has shown to be a great decision for the Ram Brand," said Hegbloom in the company's release.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.