Mazda X-90, page #7

Auto blog

The Mazda MX-5 Miata is truly a four-season sports car

For all intents and purposes, the Mazda MX-5 Miata is a product of California. I know it says Hiroshima on the shipping container, but the car belongs to the Golden State as it was dreamt up in Irvine and honed its driving skills on the roads near Santa Barbara. And logic would dictate the Miata would be useless in any situation other than direct sunlight. That's what drivers from other states would think, anyway. It's the time of year when those of us from the west coast fly out to places where it's snowy and icy and everyone laughs at us because the cold and white stuff essentially shuts us down. Make fun of Californians driving in the rain or freaking out when the outside temperature dips below 55 degrees. What can we say, we're just out of our element. Perhaps, then, it's surprising the Miata handles snow a lot better than I do. I found this out when Mazda sent me to Crested Butte, CO, for a little fun on a frozen track. Yes, there was a lot of sideways action, but it had more to do with the two California residents inside than with the car. The company really invited journalists to Colorado to get an idea of how its all-wheel-drive crossovers perform when things get snowy and icy. But the real show was watching how we navigated the autocross course they set up for the rear-drive Miatas that Mazda brought along. The Miata had a good heater, but it was my laughter caused by immense admiration that kept me from freezing my fingers off. Armed with a set of Bridgestone Blizzak winter tires, the Miata performs just about how you'd expect it to – if you're light on the gas and quick with the steering and have a good amount of patience in you. It all works well if you're a pro driver, less so if you're not a frequent track visitor, regardless of the weather. But fortunately we were using the fourth-generation Miata, which has to be the most forgiving sports car ever. On pavement, it behaves like a compact hatchback. Put it in sixth and it's relaxed and compliant, with a ride that doesn't beat you up and an engine that knows when you just want to get where you need to go. Provoke it, however, and it rewards you with predictable responses from the controls. It does the same thing on ice, if you have a firm grasp on how a car responds to the frozen stuff. Starts are tricky, even in second gear, if you underestimate the power from the 2.0-liter four.

Cedar Rocket is the fastest all-electric log car in the world

An electric turbine manufacturer, a mechanic, and a log house builder walk into a bar. No, wait. The three are standing around at Barrett-Jackson a few years ago, talking about the world. What's the eventual punchline? An all-electric vehicle mash-up of a Mazda RX-8 and a giant piece of wood. One that was just awarded a Guinness World Record for "fastest motorized log." "Truly, what else would you think of?" - Bryan Reid, Sr. Bryan Reid, Sr., star of the reality show Timber Kings, is the log house builder in the set-up above, and he's now the proud owner of Cedar Rocket. He told AutoblogGreen that a log-based EV is the natural result of the three guys chatting. "Truly, what else would you think of?" he said. "I mean, really? There has to be something to come out of it other than girls. It was crazy, but it's a good story and nobody gets hurt. It's hard to make the news when everything's positive." Idea in hand, Reid and his friend set off to actually build the car. Gerald Overton, the mechanic, turned the Mazda into a welcoming recipient, working on the disc brakes, axles, frame, differential, and suspension. While the presence of a television producer kept things moving, Reid said that it still took almost two years. "It started out, not as a joke, but as something very light," he said. "You put a log on a couple of axles and 'ha ha.' It ended up taking many thousands of hours. We don't do anything halfway." In the end, Reid and the team took the Cedar Rocket to the Wild Horse Pass Motorsports Park in Chandler, Arizona and managed two runs of 55 miles per hour within an hour (that's what Guinness required to hand out the official record). The Rocket is incredibly stable – heavy batteries help there – and Reid pointed out that because the EV uses electric turbines, it's not a quarter-mile car. "It's more like a salt-flat car," he said, because the "turbines that take a while to spin up." Given the right conditions, Reid said the team thinks the Cedar Rocket could go 120-130 mph. "It's crazy because it's different." But the point of this car isn't to just go fast. The builders will bring the car to Barrett-Jackson and auction it off next year, but before that it will make the rounds at places like SEMA and a number of unexpected events, like golf shows. The point is to get attention and raise money and awareness for veterans groups. "I believe it's for the best cause in North America," he said.

MotorWeek checks out two sides of the '90s Japanese car scene

MotorWeek's Retro Reviews let you feel nostalgic about a huge range of classic cars, and the latest two releases offer a look at two very different sides of the Japanese car market in the 1990s. The video above shows off tuned examples of the Mazda RX-7 and Nissan 300ZX. Check out the clip below to remember the 1997 Honda CR-V, if you want to reminisce about something a little more utilitarian. The RX-7 and 300ZX were among the era's best Japanese sports cars, and these examples' suspension and engine overhauls gave them an extra boost. Peter Farrel Supercars tunes the Mazda, and the vibrant yellow paint and body kit make it look ready for an episode of Initial D. The updated powertrain stands up to the mean styling and gets the RX-7 to 60 miles per hour in 4.5 seconds. The Stillen 300ZX GTZ sports a giant wing, and new turbos take the output to 465 hp. It sprints to 60 in 4.9 seconds. The CR-V sits on the opposite end of the automotive spectrum as the tuned RX-7 and 300ZX, but it's even more important in a historical sense. The Honda (along with the Toyota RAV4 and others) was among the progenitors of today's mega-popular compact crossovers. These early examples set the foundation for offering buyers a utilitarian vehicle in a comfortable package with good fuel economy at an affordable price. The CR-V had some quirky charm, too, like the removable picnic table hidden in the cargo floor. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mazda engineer wants new rotary to be turbocharged

Hope springs eternal for Mazda to revive the high-revving Wankel engine for a new sports car, and the company keeps feeding that thirst with hints that it could happen. To make the possibility even more tantalizing, Mazda drivetrain and powertrain assistant manager Tetsushi Marutani tells Motoring that he wants the updated mill to pack a turbocharger. "Personally, I think that a rotary with some turbo or compressor would be good," Marutani said to Motoring. "Because a rotary, in my opinion, they require more [torque at] low speed, low down torque. So if we have some small compressor or turbo it would help." Mazda hasn't sold a rotary-powered model since the RX-8 and hasn't had a turbocharged one since the third-generation RX-7. However, the recent RX-Vision concept (above) at least hinted at a possible Wankel revival, and Mazda officials confirmed that its engineers continued to develop the engine since the RX-8's demise. The RX-Vision used a next-gen rotary called the Skyactiv-R, but Mazda didn't officially confirm any details about it. Rumors suggested the engine had a two-rotor layout with a total displacement of 1.6 liters. A two-stage electric turbo and hybrid powertrain would allegedly boost the total output of around 450 horsepower. The electric assistance could also counter the Wankel's lack of torque at low revs and poor fuel economy. Those rumored specs sound fantastic, but we still take the rotary's return with a grain of salt. Mazda CEO Masamichi Kogai is adamant that it's not worth the company's limited resources to develop a niche sports coupe instead of better selling vehicles. Related Video:

Mazda recalls Takata airbags in B-Series

The Basics: Mazda will recall 19,000 examples of the 2004–2006 B-Series pickup. The Problem: The pickups contain Takata-sourced driver's side airbag inflators that could rupture in a crash. The spray of metal shrapnel could injure or even kill occupants. Injuries/Deaths: None reported in the Mazda pickups. However, a rupturing airbag inflator killed the driver in a Ford Ranger, which is identical to the B-Series. The Fix: Mazda will replace the driver's side inflator. If You Own One: Mazda plans to notify affected owners as soon as dealers have the replacement parts. More Information: Mazda already recalled 442,266 driver's side Takata inflators and 416,475 of them on the passenger's side. The affected models included the 2003-2008 Mazda6, 2004-2006 B-Series, 2006-2007 Mazdaspeed6, 2004-2008 RX-8, and some examples of the 2004 MPV. Ford also issued an expanded safety campaign for 391,394 examples of the 2004-2006 Ranger. Related Video: Mazda Announces Recall On B-Series Vehicles With Takata Driver-Side Frontal Airbag Inflators WASHINGTON, DC (February 1, 2016) – Mazda has decided to recall all 2004–2006 model year B-Series Trucks with Takata driver-side frontal air bag inflators. Approximately 19,000 vehicles are affected in the U.S., Puerto Rico and Saipan. There have been no reports of accidents or injuries on the Mazda-badged vehicles subject to this recall. Model Year 2007-2009 B-Series Trucks with Takata passenger-side frontal air bag inflators are part of a previous recall. Approximately 19,000 vehicles are affected in the U.S., Puerto Rico and Saipan. Below is a summary of Mazda models with a passenger- and/or driver-side front Takata air bag inflators currently being recalled. Total Number of Driver's frontal air bag inflator - 442,266 Total Number of Passenger's frontal air bag inflator - 416,475 2003-2008 Mazda6 2004-2006 B-Series 2006-2007 Mazdaspeed6 2004-2008 RX-8 (All Driver-side / Certain Passenger-side) 2004 MPV (Certain Vins only. Click here to see if your vehicle is included.) Mazda North American Operations is headquartered in Irvine, Calif., and oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United States and Mexico through more than 700 dealers. Operations in Mexico are managed by Mazda Motor de Mexico in Mexico City.

Mazda halts sales of CX-5 due to fire risk in crashes

The Basics: Mazda will recall 264,463 examples of the 2014-2016 Mazda CX-5 in the US. The Problem: The fuel filler pipe can rupture in a rear collision. This could cause a fuel leak, which is a fire risk. Injuries/Deaths: None reported. There are also no reports of fires. The Fix: Mazda has not yet specified the repair for the problem. If You Own One: Concerned owners can get a free loaner, demo, or rental vehicle until Mazda dealers repair the vehicle. More Information: Mazda also has a stop sale on new examples of the CX-5 until the company fixes the problem. Related Video: Mazda Implements Recall and Stop Sale of All 2014-2016 MY CX-5 Vehicles WASHINGTON, DC (February 1, 2016) – Today, Mazda Motor Corporation filed a safety defect report with the National Highway Traffic Safety Administration (NHTSA) to address a concern with 2014-2016 Model Year (MY) CX-5 vehicles. On all 2014-2016 MY CX-5 vehicles, the fuel filler pipe could rupture during a rear collision, and could potentially cause fuel leakage. Approximately 264,463 vehicles are affected in the U.S. There are no reports of accidents or injuries occurring in the subject vehicles as a result of this condition. If a customer has concerns about driving their vehicle before the repair is available, dealers will offer a free loaner, demo, or rental vehicle. Mazda North American Operations is headquartered in Irvine, Calif., and oversees the sales, marketing, parts and customer service support of Mazda vehicles in the United States and Mexico through more than 700 dealers. Operations in Mexico are managed by Mazda Motor de Mexico in Mexico City.

Mazda to relocate its US offices into Irvine's tallest building

Mazda is the latest foreign automaker to be moving its North American headquarters. Only this time, it's not moving further south. Instead, the Japanese automaker is simply relocating to another facility in Irvine, CA. In a little over a year from now, Mazda North American Operations will move to 200 Spectrum Center Drive (pictured in the rendering at right), taking up five of the 21 floors in Orange County's tallest building for a total of over 100,000 square feet of office space. It'll also take up half the lobby with vehicles on display and the exclusive naming rights on the top of the building. The facility, designed by Pei Cobb Freed & Partners, boasts full glass walls from floor to ten-foot ceiling for uninterrupted 360-degree views. Mazda has been in its current US headquarters at 7755 Irvine Center Drive (pictured above) since 1987. The five-story building was specifically constructed for the purpose and was the tallest in Irvine at the time. Prior to that it was based in Compton from 1970. The move to the new facility is scheduled to take place in February, 2017. Mazda's announcement marks only the most recent of foreign automakers to relocate their North American headquarters. Toyota is moving to Texas, Subaru to Camden, Lotus to Ann Arbor, Daimler to Farmington Hills, and Mercedes-Benz to Atlanta (where Porsche recently relocated, as well). Cadillac also recently moved from GM's Renaissance Center in downtown Detroit to its new headquarters in New York. Hyundai and Kia also quarter their North American operations in Irvine, as does Aston Martin. Meanwhile Honda and Toyota (for the time being) are based less than an hour away in Torrance, and Mitsubishi halfway in between in Cypress. Though they no longer sell passenger cars in North America, Isuzu and Suzuki still operate their US bases in SoCal as well, in Anaheim and Brea, respectively – all municipalities located just south of Los Angeles. Nissan and Subaru also base their US operations outside of California, with head offices in Tennessee and New Jersey, respectively. Related Video: Mazda Set To Relocate North American Headquarters in 2017 - With 50 years of roots in Southern Calif., Irvine will remain 'home' for Mazda - IRVINE, Calif., Jan. 11, 2016 /PRNewswire/ -- Mazda North American Operations (MNAO) has spent the last three years bringing all-new, upscale vehicles to the U.S. and earning outstanding critical acclaim in the process.

Petrolicious lets a 1971 Mazda RX-2 howl

Rotary engines scream to the heavens in the best way possible. To hear a wonderful example of the Wankel's battle cry, turn up your speakers and watch Petrolicious highlight an immaculately clean 1971 Mazda RX-2 in Australia. Owner Jason Humble took three years to build his RX-2 from a bare shell, and he started competing with it in vintage racing in 2005. The little coupe's class pits it on track against Mustangs and Camaros, but Humble claims that he's regularly near the top of the pack thanks to the Mazda's communicative chassis. We don't get to see the RX-2 mixing things up on track in the Petrolicious video, but Humble does treat us to a drive through the Australian countryside. He's happy to let the coupe's rotary rev, and the little engine is capable of making a wonderful noise. It's great to see Petrolicious continue to give the spotlight to these sometimes overlooked classic Japanese sports cars.

Mazda recalls 374,500 vehicles because of Takata inflators

The Basics: Mazda will recall 374,519 examples of the 2003-2008 Mazda6 manufactured from May 29, 2002, to May 5, 2008; the 2006-2007 Mazdaspeed6 built from July 1, 2005, to June 29, 2007; and the 2004 RX-8 made from June 25, 2003, to June 30, 2003. The Problem: These vehicles contain front passenger airbag inflators from Takata that could rupture in a crash. If this happens, it could spray metal shrapnel at an occupant, which could seriously injure or even kill the person. Injuries/Deaths: The report from the National Highway Traffic Safety Administration didn't mention injuries or deaths, but Autoblog reached out to Mazda for confirmation. Takata's rupturing inflators allegedly have links to nine deaths globally and around 100 injuries. The Fix: Mazda dealers will replace the passenger side airbag with a new one. If You Own One: Mazda has not said when the replacements for these vehicles will begin. Experts believe that prolonged exposure to high humidity can cause the inflators' ammonium nitrate propellant to ignite too quickly in an accident. More Information: This recall is a nationwide expansion of Mazda's passenger's side airbag recall, which was previously limited to high-humidity regions. The population now includes 310,592 additional examples of the Mazda6, Mazda spokesperson Tamara Mlynarczyk tells Autoblog. The company discovered this new issue after Takata tested an inflator taken from a Mazda6, and it ruptured, according to NHTSA documents (PDF). The company already had a national safety campaign to fix the driver's side airbags in these vehicles. Related Video: RECALL Subject : Passenger Air Bag Inflator May Rupture Report Receipt Date: DEC 23, 2015 NHTSA Campaign Number: 15V869000 Component(s): AIR BAGS Potential Number of Units Affected: 374,519 All Products Associated with this Recall Vehicle Make Model Model Year(s) MAZDA MAZDA6 2003-2008 MAZDA MAZDASPEED6 2006-2007 MAZDA RX-8 2004 Details close Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6 vehicles manufactured May 29, 2002, to May 5, 2008, 2006-2007 Mazdaspeed6 vehicles manufactured July 1, 2005, to June 29, 2007, and a limited production of model year 2004 RX-8 vehicles manufactured June 25, 2003, to June 30, 2003. The inflators in the front passenger air bags are susceptible to rupture in the event of a crash necessitating the deployment of the front passenger air bag.

Flyin' Miata is building a V8-powered MX-5 ND

It's cold in many parts of the country, but this V8-swapped 2016 Mazda MX-5 Miata that Flyin' Miata is developing has us dreaming about throwing on a parka and taking a very brisk drive. This beast is the product of the talented folks at Flyin' Miata, but we can't get too excited just yet. According to the company's brief Facebook post, this is just a dummy V8, placed under the Miata's hood to confirm fit. Judging by the photo, the engine fits like a glove. "There's still a long way to go before this is a real thing," Flyin' Miata writes, but the company admits everything looks "very promising" so far. The post doesn't mention any details about the estimated specs, but Autoblog reached out to Flyin' Miata for more information about this intriguing build. Keith Tanner, one of the mad scientists who shoehorns V8s into Miatas at the Colorado outfit, told us that Flyin' Miata is looking at both the LS3, which will provide between 430 and 525 hp, and the LT1 which is 460 hp out of the box. A supercharged LT4 is also being considered, but as Tanner put it, "that might be a little nuts" in a car as light as the ND. In any of these engine configurations, Tanner estimates the V8-swapped ND should comfortably be a sub-4 second to 60 mph car. The transmission will be a Tremec T56 Magnum six-speed manual. The suspension, brakes, fuel system, cooling system, and the chassis itself will all be beefed up to handle the power, as per normal FM practice. The one question mark is the rear end, as the ND's existing one simply won't be up to the task of putting that much horsepower to the ground. The 2016 Miata was one of the best cars we drove in 2015, but Flyin' Miata knows how to turn a standard MX-5 into an absolute hotrod with the company's LS3 V8 conversions for earlier models. Imagining the more modern chassis from the latest generation with a massive dollop of more power is an exciting thought. We can't wait to see how this project turns out. Related Video: