Mazda Race Car, page #31

Auto blog

Hyundai, Mazda and Ford offering support to victims of Colorado flooding

Hyundai, Mazda and Ford have initiated programs to aid victims of the recent floods across Colorado. Hyundai is stepping in to give help directly to drivers, offering those with flood-damaged vehicles a $750 credit on a new Hyundai. "At this stressful time, the last thing flood victims should be concerned with is how they are going to replace their water-damaged or destroyed vehicles," Dave Zuchowski, executive vice president of Hyundai's American sales, said.
The Hyundai program will run from September 18 through the end of October, and will cover all citizens in counties declared disaster areas by FEMA. Residents will need to provide proof of residency and a letter from their insurance company describing the damage to their vehicle.
Mazda, on Friday, announced that it'd be donating $25,000 to the American Red Cross and a further $15,000 to the Humane Society of Boulder Valley, in the name of disaster relief. Mazda's President and CEO, Jim O'Sullivan, said, "The flooding across the states of Colorado, Texas and New Mexico has been absolutely devastating for not only the people living there but their four-legged loved ones as well. Mazda hopes that those in need can get the help they deserve through such great organizations as American Red Cross and Humane Society of Boulder Valley."

Mazda struggles to meet demand on rising sales

For Mazda there's good and not-so-good news on the heels of strong US sales in 2012: demand is high - especially for the Mazda3, Mazda6 and CX-5 - but supply is low, TheDetroitBureau.com reports. That's partly because all Mazda production happens in Japan, since it ended its alliance with Ford and pulled out of a joint venture with the blue oval building cars in suburban Detroit last year.
In 2012, Mazda sales here jumped 26.4 percent, but 2013 sales through August have just been keeping pace with the overall US auto industry, increasing at a rate of 6.8 percent. Mazda North American Operations director of marketing and communications Jeremy Barnes says that sales have slowed because the company is facing challenges delivering products here.

Mazda Furai concept designer talks about his car's passing

Last week, there was mourning at the Autoblog offices as word trickled in that the Mazda Furai concept - one of the coolest, best-looking showcars to grace an auto show stage since the wild and crazy 1960s -had been killed. It was killed on the track with the folks from Top Gear in attendance. We're sure the gods of driving would have wanted it to die on a circuit, but that doesn't make its fiery passing any easier to deal with.
The Furai is the rare concept car that had a lasting appeal with enthusiasts, partly because it was a real, functioning racecar, complete with a wacky three-rotor Wankel engine and cutting-edge Nagare design. Now that it's gone, though, Road & Track's Mallory McMorrow, who was an intern at Mazda Design when the Furai was being styled in 2007, has published an interview with one of the men who penned the Mazda showcar's striking exterior, Carlos Salaff. It's a great piece on the emotional connection between a designer and his creation, and one you should take the time to read. Click on over to R&T for the full story.

Edmunds ranks the best used cars for 2013

When people ask us what car we would recommend for them, it's usually not easy to answer. To make a useful recommendation we must consider which of the numerous vehicle segments fits their needs best, and then choose one of the many vehicles offered in each segment. For some people, new cars don't meet their expectations of value, because they lose so much of it the moment they are purchased and driven off the dealer lot. For them, there's always the used-car market, where great deals can be found, but cars' histories of reliability and maintenance records - and perhaps that Certified Pre-Owned warranty - become ever-important factors playing into purchase choice.
To help out, Edmunds has done us the favor of assembling a list of the best used vehicles money can buy, covering model years 2006-2011, according to what it considers the most important criteria when shopping for used autos: reliability, safety, value and availability. That means unreliable, unsafe, super-expensive or limited-edition models don't appear on the list, but instead cars from each segment that are more likely to satisfy the general population.
There are some real goodies on the list, including but not limited to vehicles such as the capable Honda Fit, the cultish Honda Accord coupe (which can be had with a 240-horsepower V6 and a six-speed manual transmission some years), and the powerful Chevrolet Corvette. While Edmunds' choice of the Volvo C70 for best used convertible baffled us at first (not that it's a bad car), it redeemed itself by stating that the Mazda MX-5 still is an unofficial top choice if you don't require more than two seats.

Mazda6 diesel delayed until April

Diesel enthusiasts waiting on the new Skyactiv-D-powered Mazda6 will have to wait a bit longer. The shapely fuel-efficient four-door has just had its North American launch pushed back to April, due to delays in emissions testing. Mazda had originally planned to launch the Mazda6 diesel before the end of this year, making the four- to five-month delay a rather serious one.
Mazda's senior vice president of US operations, Robert Davis, told Mazda employees in a letter obtained by Automotive News that, "final certification testing - the results of which are looking encouraging - is taking longer than we had initially expected." Following this letter, Mazda made an official announcement:
"The on-sale date for Mazda6 SKYACTIV-D clean-diesel has been moved to late-Spring 2014, to accommodate final emissions testing and certification. We are pleased with the ongoing development and are excited to launch this much-anticipated vehicle in North America. 2014 Mazda6 sales continue to exceed both our expectations and our production abilities, and supplies of the car are short at dealers across the U.S. More information on the SKYACTIV-D clean diesel Mazda6 will be available closer to the on-sale date."

2014 Mazda6: July/August 2013

Our newest long-termer - the Soul Red 2014 Mazda6 seen here - arrived in my driveway at the end of June. Without hesitation, I immediately put it to work as a daily driver, carpool bus and family vacation sled, and it accomplished all of those tasks with aplomb. Now, more than 4,000 miles down the road, I am left convinced that Mazda's latest midsize sedan is one of the best in its segment.
During the past 60 days, I have subjected the Mazda6 to scorching travel across Southwestern deserts, wheezing climbs over 8,000-foot-high Sierra Nevada mountain passes and basking in the cool ocean breezes of Malibu. It traveled with four passengers and a full load of luggage from Los Angeles to Lake Tahoe, and it braved the bumper-to-bumper freeway congestion on a weekday trip down to San Diego. It accomplished everything that was asked of while hardly skipping a beat - it has only required a regular sip of unleaded fuel to keep it moving forward.

2014 Mazda3 configurator zoom-zooms to life

The 2014 Mazda3 is probably going to be on a lot of shopping lists, thanks to its striking good looks, clean interior treatment, fuel economy and driving character. If it happens to be on your personal list of new cars to test, you'll be happy to see that the configurator for Mazda's newest product has officially gone online.
In terms of build-your-own web items, configuring a 3 isn't much of a departure from the rest of the Mazda range. Most of the work comes from choosing one of the three trim levels - Sport, Touring and Grand Touring - and selecting either the 155-horsepower, 2.0-liter, Skyactiv four-cylinder or its larger sibling, the 184-horsepower, 2.5-liter, Skyactiv four. From there, a simple range of color and interior finishes are available, before a slim list of packages, options and accessories. Really, Mazda's made it easy to get through this build process.
Click on over to the configurator and take a look at the options, colors and prices for Mazda's newest five-door hatchback.

Mazda's Hofu plant builds its ten-millionth car

Ten million is a lot no matter which way you cut it, and no matter what you're talking about: Ten million dollars, ten million miles, ten million people... certainly ten million cars. And that's the milestone that Mazda's Hofu plant in Yamaguchi prefecture of Japan has just achieved.
The Hofu facility has been in operation since 1982, and was supplemented with a second plant on the same site ten years later. Hofu reached a million units built in 1986 and five million in 2002. But with production now at 482,100 units per year, it took less than twelve years to double that previous milestone.
The magic ten-millionth car was a new Mazda6 (known locally as the Atenza), which is built at Hofu Plant No. 2, while Hofu Plant No. 1 gears up for the new Mazda3 (aka Axela). Scroll down below for a related press release.

Mazda reports strong Skyactiv sales, plans to boost output 25%

Mazda is set to expand production of its Skyactiv engines after critical and commercial acclaim for the fuel-sipping powerplants. The Japanese manufacturer has a number of plans in the works to bump up production, with the first being a 25-percent increase in output from its Hiroshima, Japan engine facility.
Besides adding a new line, Mazda will modify the line that built MZR engines, a family of mills that includes the 2.3-liter, turbocharged four-cylinder found in the Mazdaspeed3 and the 2.0-liter found in the MX-5 Miata. The bump in production is just part of Mazda's goal of selling 1.7 million vehicles globally by 2016, with 80 percent of those vehicles expected to wear a Skyactiv badge.
Mazda also builds Skyactiv engines at a joint-venture facility with Ford, in Changan, China, while a Mexican facility will go online by March of 2014. Skyactiv engines currently power the Mazda3, Mazda6 and CX-5.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...