Mazda MX-5 Miata, page #9

Mazda MX-5 Miata Price Analytics

About Mazda MX-5 Miata

Auto blog

Fourth-gen Mazda MX-5 Miata could get turbo power later in life

While there's a lot to love about the new Mazda MX-5 Miata, its debut was met by a vocal group of enthusiasts who derided the fourth-generation roadster's reduction in power output. The new model only puts out 155 horsepower, down from 167 in the NC. A report from Australia, though, claims Mazda may yet address the less potent output of the ND. Things started earlier this year, as Motoring.com.au tells it, when Mazda's global PR boss, Kudo Hidetoshi, hinted that a turbocharged or Mazdaspeed model "will definitely" be considered. Then last month at Goodwood, the ND's program manager, Nobuhiro Yamamoto, said complainers were welcome to get their thrills elsewhere. Recognizing this contradiction among Mazda's brass, Motoring asked Yamamoto-san again about his statements, which he seemed to walk back. "It's not a conflict [between statements made by Yamamoto and Hidetoshi]," Yamamoto said, indicating that his statements were made in relation to the new MX-5's launch. "Kudo-san talked about this in terms of a 10-year lifespan, but when I was asked the question right after the launching of the ND, I said 'we have no plan to have a turbo at that point in time.' That is what I meant." Seeking an opening, Motoring pushed the Japanese engineer on the chances of a more potent MX-5, perhaps without a turbocharger. "If you could achieve what we want, to which is great response, very light and powerful with great performance feel with natural aspiration, then we don't need a turbo," Yamamoto said. "But if we want more power because we don't get satisfied with natural aspiration then we may think about the turbo." Related Video:

Mazda MX-5 Miata goes Head 2 Head with Subaru BRZ

It's a battle that's been in the making for some time now: the Subaru BRZ versus the Mazda MX-5 Miata. And now that the new Miata has arrived – and in Club spec to boot – that's exactly what Motor Trend has lined up for its latest episode of Head 2 Head. Now before you go screaming that one's a coupe and the other a convertible, take a few commonalities into account. Roofs aside, both feature a 2.0-liter four mounted up front, driving the rear wheels through a six-speed manual transmission. Both are made by Japanese automakers and cost around $25-30k, give or take. Both produce around the same amount of torque, and while the Subaru may be more powerful, the Mazda's considerably lighter. To create a more even contest, then, you'd have to line a BRZ up against a Scion FR-S, or the MX-5 against the upcoming Fiat version of the same. Of course, being that close on paper doesn't mean that it's a draw. One has to come out on top. And after taking both along country roads and the Streets of Willow racing circuit, our friends at MT have picked one over the other. You'll want to watch the 22-minute video above (or at least skip ahead to the end) to see which came out on top, but if you're as enthused by a purist driver's car as we are, you'll enjoy every minute of it. News Source: Motor Trend via YouTube Mazda Subaru Convertible Coupe Economy Cars Performance Videos motor trend mazda mx-5 head 2 head

Mazda recalls 193k CX-9 crossovers over corroded suspension

An issue with the suspension on the CX-9 has prompted Mazda and the National Highway Traffic Safety Administration to recall 193,484 vehicles across the United States. The campaign specifically affects units from the 2007-2014 model years, manufactured between October 24, 2006, and December 28, 2013. In those affected vehicles, the ball joints in the front suspension may corrode due to water leaking into the fitting. According to the statement below, if the ball joint rusts, the front lower control arm could separate, resulting in a loss of steering control. And needless to say, that could lead to a crash. To repair the issue, Mazda will have to replace both the left and right lower control arms, and will naturally do so free of charge, but will undertake the repairs in stages. First, owners of the affected vehicles will receive a notification that a recall campaign is under way. Then they'll get a second letter when the parts are ready and they can bring their vehicles into their local dealers. The company will start first with 2007-09 vehicles, specifically those registered in the snowy states of the Northeast and Midwest. Specifically: Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington, DC. (Oddly, states in the the western portion of the Midwest, as well as the Rocky Mountains and the Pacific Northwest, were not included in that initial phase. Nor was Alaska, for that matter.) After that they'll call in 2010-14 models in the same states before undertaking repairs on vehicles in other areas to the west and south. Related Video: RECALL Subject : Corrosion of Front Suspension Ball Joint Report Receipt Date: JUL 20, 2015 NHTSA Campaign Number: 15V451000 Component(s): SUSPENSION Potential Number of Units Affected: 193,484 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2007-2014 CX-9 vehicles manufactured October 24, 2006, to December 28, 2013. The affected vehicles have front suspension ball joints that may corrode from water leaking into the fitting. CONSEQUENCE: Over time, the ball joint corrosion may result in the front lower control arm separating from the ball joint, causing a loss of steering control and increasing the risk of a crash.

Did Mazda designer Derek Jenkins leave to head up a 'Stealth Project?'

Not long after Derek Jenkins officially gave the 2016 MX-5 Miata to the buying world, he's left the Mazda building. Jalopnik reported that the head of design for Mazda North America changed the current job description on his LinkedIn profile to "Stealth Project." Mazda backed up the discovery with this reply to Jalop's inquiry: Derek left Mazda last Friday. He left on great terms in order to work on a new endeavor. We wish him the best of luck. He will be missed, but we are sure that he will do great things in the next chapter of his career. That "last Friday" would be July 17. Emphasizing the "stealth" bit in his new position, as far as we can tell, Jenkins still hasn't publicly answered any question about what he's doing. Every automaker has secrets, but traditional automakers usually make a hubbub about hiring big-name designers, especially one with Jenkins' resume. For his new employer to go all Ghost Recon with all information, well that's the kind of mystery this summer needs. The obvious culprit would be a certain fruit-named company in a certain Cupertino, CA office park. If that ends up being the case, Jenkins would be the second chief designer at Mazda NA to go electric: he replaced Franz von Holzhausen in the position after von Holzhausen went to Tesla. Various other Apple Project Titan hires have made the news, though. For all we know, Jenkins' project might not be automotive. So let's just go ahead and cue the speculation. We're looking forward to whatever he's got coming, and to whoever gets nominated to keep the full head of Zoom-Zoom going at Mazda NA.

Mazda replaces owner's crashed 2016 Miata with brand new car

The first shipment of 2016 Mazda MX-5 Miatas are finally here. Imagine the jubilant sensation of being among the 1,000 people to pick up the limited Launch Edition, only to feel eviscerated when the new roadster crashes hardly a mile away from the dealer. While it must be an absolutely horrendous experience, Mazda North American Operations is making things right for one forlorn couple. In what was surely among the first recorded crashes of the 2016 Miata in the US, a husband and wife recently went to pick up their new Launch Edition, but they were rear-ended almost as soon as they left the dealer. According to Jalopnik, the hit also caused the roadster to slam into the car in front and might have bent the frame. To make a bad situation even worse, the wife also needed to be taken to the hospital to be checked out. Mazda is coming to the couple's aid with a generous gift. Knowing that it's utterly unfair for the new owners not to enjoy some top-down driving while the summer lasts, the company is actually sending the pair another Launch Edition to replace their crashed example. According to a Facebook post by the dealer (below), the car should be available sometime next month. Hopefully, the couple can enjoy thousands of miles of roadster driving with this one. After hearing about one of our customers getting rear-ended just minutes after picking up their new Miata, Mazda is sending out a replacement next month! #LongLiveTheRoadster Posted by Tom Bush Mazda on Wednesday, July 22, 2015 Related Video:

Evo blasts around in a Spa 24H-winning Mazda RX-7

Think of the Mazda RX-7 today, and your thoughts likely turn to the turbocharged third-generation version of the '90s that's an icon among the tuning and drifting communities. Many years before that swoopy coupe was hanging the tail out, the first model of RX-7 was also quite a track star, though. Evo's Richard Meaden has gotten ahold of a race-prepped version that counts a victory in the 1981 Spa 24 Hours to its name – the first Japanese car to claim that honor – for a fantastic video. With 225 horsepower and weighing around 1,984 pounds, this RX-7 doesn't look like a giant killer on paper. However as Meaden illustrates, the coupe puts those rotary-powered ponies to very good use. Driving it requires constantly keeping things on the boil because the muscle is essentially absent below 7,000 rpm. Once in the sweet spot, things start progressing quickly, though. As a wonderful cap to the wall of noise from the engine, little licks of flame also shoot out of the exhaust on downshifts. Thankfully, Evo's video team captures all of the mechanical noises quite well, and the clip is a treat for those with a good pair of headphones. Despite the race-winning pedigree, Meaden has no problem grabbing the little coupe by the scruff of the neck. He chucks it through the corners to get the tail loose, and the little wisps of smoke from the rear tires prove the original RX-7 knows how to drift too. These early cars definitely worth being remembered in the pantheon of Mazda performance.

Mazda prices 2016 CX-3 from $20,840

Been eager to put your cash down on the hood of a new 2016 Mazda CX-3, but haven't known just how much to take out from the bank? You can call your branch manager now, because Mazda has released pricing details for its new subcompact crossover. The MSRP for the new CX-3 will start out at $20,840, including an $880 destination charge. (Alaskan buyers can expect to pay an extra $45 on top.) That's for the base-level Sport model with front-wheel drive. Tack on another $1,250 for all-wheel drive if you think you'll need the extra traction, but either way it'll be channeling 146 horsepower and just as much torque from a 2.0-liter inline-four through a six-speed automatic transmission. Step up to the Touring model and the retail price jumps up to $22,840 (with delivery), plus the same $1,250 for the AWD option. There's a Touring Technology package available for another $1,410 that includes moonroof, satellite radio, and cargo cover. Finally at the top of the line is the CX-3 Grand Touring for $25,870 (delivered), available with that same i-Activ all-wheel drive system, and an i-Activsense package that throws in an array of electronic conveniences and safety systems for another $1,920. So while you can get away with paying as little as $20,840 for the base model, a fully loaded CX-3 can run you as much as $29,040. Related Video: All-New 2016 Mazda CX-3 Subcompact Crossover MSRP[1] to start from $19,960 - Latest evolution of Mazda's signature KODO design comes embodied in crossover available with premium, class-exclusive features and class-leading fuel economy - IRVINE, Calif., July 16, 2015 /PRNewswire/ -- New vehicle segments don't come around often. So when Mazda had the opportunity to create its very own subcompact crossover to tackle the urban sprawl, as well as the road less-traveled, it did so the only way it would – with the fun-to-drive, stylish and upscale 2016 Mazda CX-3. 2016 Mazda CX-3 Subcompact Crossover Priced From $19,960 Nearing its mid-August expected on-sale date, Mazda North American Operations (MNAO) has released full pricing for its entry-level CUV offering, starting at an MSRP2 of $19,960 for the entry-level CX-3 Sport with front-wheel drive. As a $1,250 upgrade, buyers can select CX-3 Sport with Mazda's predictive i-ACTIV all-wheel drive that takes temperature, road conditions, steering-angle and weather into account, among other factors, to help optimize to which wheels engine power is routed for maximum performance and stability.

Fiat 124 Abarth Spider spied, may get Alfa 4C power

We've long been excited to see, hear, and drive the car that results from the in-process Fiat-Mazda partnership. The Italian brand has had access to the excellent 2016 Mazda MX-5 Miata on which to base its own roadster, and the fruits of that labor will soon ripen. Spied here is not only the ensuing Fiat 124, but a hotter Abarth tuned version of the spider. At least, that's what we're hoping. Our spy shooters indicated that the car seen here not only sounded more aggressive than 'standard' 124 mules seen previously, but that it also accelerated away from their long lenses with a smartness. The 124 Spider is already rumored to make use of the 1.4-liter turbo I4 that makes 160 horsepower in the Fiat 500 Abarth, and this version may have a still-more-powerful engine. Another tell about the added output are the quad tailpipes in place of the lesser car's set of two. There's no hard evidence to support exactly which engine might be under the 124's hood, however. It's possible that the 1.7-liter turbo from Alfa Romeo 4C could be in play – with its 237-hp output – as the 124 was originally going to wear an Alfa badge. If that were to happen, however, the Fiat would almost certainly get a dual-clutch transmission instead of the purer manual box. In any event, more details about the car will no doubt crop up closer to the expected reveal this fall. Related Video:

First batch of 2016 Mazda MX-5 Miatas lands in US [w/video]

Have you been patiently awaiting the arrival of the all-new 2016 Mazda MX-5 Miata? Then we're glad to report that your patience has paid off. In fact, even if you haven't been so patient, we're still glad to report that the wait is finally over, as the first batch of the new Japanese roadsters has arrived on American soil. The initial batch of several hundred MX-5s arrived at the port of San Diego from the factory in Hiroshima on board the Phoenix Leader, a 636-foot vehicle carrier ship registered in Panama and operated by Japanese shipping giant NYK Lines. The vehicles are currently being processed at the SoCal port, with deliveries to commence "in the next several weeks," according to Mazda in the brief statement below. The fourth-generation Miata, designated generation ND, mad its global debut at the Paris Motor Show, and its US debut at the LA Auto Show. Production commenced in Japan this past March. The new roadster arrives in US showrooms with a 2.0-liter four-cylinder engine (the smaller 1.5 kept away from these shores), a six-speed manual (replacing the previous five-cogger), a folding soft roof (no retractable hard top this time), and a starting MSRP of $24,915 (plus an $820 destination charge). That, of course, is for the base Sport model, with higher-spec Club and Grand Touring trims also on offer. Along with the images above, you can watch footage of the vehicles driving off the ship in the video below. Might we recommend, however, muting the cheesy soundtrack and playing something more suitable over it instead. Neil Diamond's (Coming to) America ought to do the trick... today! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Mazda Welcomes the First Shipment of All-New 2016 MX-5s Mazda North American Operations today welcomed the first shipment of the all-new 2016 MX-5s. They will begin their port processing procedures and deliveries will follow in the next several weeks. Featured Gallery 2016 Mazda MX-5 Miata: US Arrival Mazda Convertible Performance mazda mx-5 san diego port

Import pickup truck-killing Chicken Tax to be repealed?

After over 50 years, the so-called Chicken Tax may finally be going the way of the dodo. Two pending trade deals with countries in the Pacific Rim and Europe potentially could open the US auto market up to imported trucks, if the measures pass. Although, it still might be a while before you can own that Volkswagen Amarok or Toyota Hilux, if ever. The 25-percent import tariff that the Chicken Tax imposes on foreign trucks essentially makes the things all but impossible to sell one profitably in the US, which lends a distinct advantage to domestic pickups. Both the Trans-Pacific Partnership with 12 counties and Transatlantic Trade and Investment Partnership with the European Union would finally end the charge. According to Automotive News though, don't expect new pickups to flood the market, at least not immediately. These deals might roll back the tariff gradually over time, and in the case of Japan, it could be as long as 25 years before fully free trade. Furthermore, Thailand, a major truck builder in Asia, isn't currently part of the deal, and any new models here would still need to meet safety and emissions rules, as well. Automotive News gauged the very early intentions of several automakers with foreign-built trucks, and they weren't necessarily champing at the bit to start imports. Toyota thinks the Hilux sits between the Tundra and Tacoma, and Mazda doesn't think the BT-50 fits its image here. Also, VW doesn't necessarily want to bring the Amarok over from Hannover. There is previous precedent for companies at least considering bringing in pickup trucks after the Chicken Tax's demise, though. The Pacific free trade deal could be done as soon as this fall, while the EU one is likely further out, according to Automotive News. Given enough time, the more accessible ports could allow some new trucks to enter the market.