Mazda CX-50, page #32

Auto blog

Mazda delays US launch of Skyactiv-D engine

Japanese automakers haven't lead the charge towards diesel power in the same way as, say, the Germans have. But Mazda is out to change that. It has been following Audi's lead on the racetrack with oil-burning racecars right here in America, and will soon translate that excitement to the road by introducing its Skyactiv-D engine in North America. It just won't happen as soon as we expected.
Mazda announced today that, while its diesel engine meets current emissions requirements, the company has decided once again to push back an introduction originally slated to kick off in the Spring. According to the brief statement below, Mazda wants to take more time to find "the right balance between fuel economy and Mazda-appropriate driving performance."
In other words, the Zoom-Zoom brand apparently thinks its diesel engine doesn't deliver the zoom-zoom American drivers would expect, so we'll have to wait just a little bit longer. Details to follow closer to launch, whenever that will ultimately take place.

Mazda hard at work on Skyactiv 2 engine technology

As Mazda continues the current rollout of its still-new Skyactiv technology, the automaker is already looking at improving its family of engines for even better fuel economy and emissions reductions. Automotive News reports that with stricter fuel economy and emissions regulations planned for 2020 and 2025 in Europe, Mazda will likely release engines with next-generation Skyactiv 2 technology by the end of this decade, and Skyactiv 3 units just five years later.
The latter is expected to focus on improved engine cooling and lessening energy losses, but the big news in AN's report is that the next-gen Skyactiv 2 engines will use Homogeneous Charge Compression Ignition, or HCCI. This type of ignition is very similar to how a diesel engine operates (with high compression and using the compression stroke for fuel combustion rather than spark plugs), a method said to provide a cleaner and more efficient fuel burn - to the tune of a 30-percent improvement in fuel economy compared to current Skyactiv engines. Other automakers, including Hyundai, have already announced they are developing HCCI powerplants with similar technology and characteristics, so Mazda likely won't be a lone wolf here.
Equipped with HCCI technology, Mazda figures to be able to compete with larger automakers in terms of fuel economy and emissions without resorting to hybrid powertrains, continuously variable transmissions or automatics relying on more forward gears (eight or more) for optimal efficiency. Some of the challenges of HCCI, according to AN, include the need for better engine cooling, risk of misfire at high and low rpm and uneven engine performance based on fuel properties.

Mazda begins building Mazda3 in Mexico for US

With fluctuations in international currencies and rising shipping costs to take into account, foreign automakers can't get away with building cars overseas and selling them in North America as easily as they used to. Particularly with inexpensive mainstream models. And given the benefits of cheaper labor and free trade under NAFTA, many have opted to assemble their cars for the North American market in Mexico. That's why the likes of Toyota, Mercedes and BMW have all opened plants in Mexico. And now Mazda has followed suit.
Ground was initially broken for Mazda de Mexico Vehicle Operations at Salamanca in the state of Gunajuato back in 2011, but production has just now gotten under way. The first vehicle to roll off the line? A Mazda3 sedan destined for the United States. Soon, the plant will begin production of the next Mazda2 as well, selling it alongside its larger counterpart across the Americas and in Europe as production expands to 230,000 units annually. For more information, see the official press release below.

Mazda details diesel prototype at Daytona test

Diesel has without a doubt become the dominant fuel in the modern era of endurance racing. The 24 Hours of Le Mans has been won under diesel power for the past eight years running, as has every race in the FIA World Endurance Championship since its inauguration in 2012. Yet there will only be one diesel prototype entered in the top tier of the new Tudor United SportsCar Championship this year, and it belongs to Mazda.
The last Japanese manufacturer to win at Le Mans outright, Mazda has been gradually working its way back up the endurance racing ladder once again, following the example set by Audi with diesel power. Last year it campaigned a competition-spec Mazda6 Skyactiv-D in the GX class of the Grand-Am series, but rather than simply port over the existing racer into the new series, it's fielding a new prototype instead, just as it promised a couple of months ago. And now that prototype has hit the track for the first time, prompting Mazda to release its basic specs for the first time.
Tentatively referred to simply as the 2014 Mazda Prototype, the purpose-built racecar is testing this weekend in the Roar Before the 24, the official test session at Daytona that kicks off the racing season. It packs a 2.2-liter SkyActiv-D engine that's based heavily on the production version but tuned to produce 450 horsepower and 580 pound-feet of torque in race trim. Power is channeled through a six-speed sequential transmission from Xtrac, carbon brakes from AP and 18-inch racing slicks from Continental. With the Daytona-spec aero setup, it'll top out at around 186 miles per hour.

Mazda2 with extended-range hybrid rotary tech shown

Every story dealing with a new rotary engine from Mazda lands in a different place on the matrix of possibilities between "Coming soon!" and "Never gonna happen!" In 2011 it was speculated that the rotary engineering program would be shut down with the demise of the RX-8, in 2012 the program was still alive and taking lessons from the SkyActiv engines, in August 2013 a Mazda insider said a rotary engine called 16X would be here in two years, in November the CEO said the only way we'd ever get a new rotary is if Mazda could sell 100,000 of them per year. Meaning that, for the moment, you can forget about it.
And yet, last month Mazda was putting journalists in a Mazda2 RE Range Extender, an electric car using a 0.33-liter rotary to power its lithium-ion batteries when the charge runs down. With a 75-kilowatt, 100-horsepower electric motor turning the front wheels, the Wankel generator and its 2.6-gallon gas tank living under the trunk double the range of the electric-only Mazda2 to 250 miles.
There's been talk of using a rotary to assist an alt-fuel vehicle for at least seven years, with Mazda pairing an electric motor with a rotary that ran on gas and hydrogen in a Mazda5 in 2007. Since then, almost all of those stories debating its return or demise also spoke of the oddball motor's advantages, such as compact size and ability to run on various fuels, as an aid in an unconventional powertrain.

Mazda planning 'aggressive' dealer shakeup

Mazda has set an ambitious goal of selling 400,000 units by the end of the 2015 Japanese fiscal year in March 2016, and to do that, it's going to need to take some aggressive action. That means that underperforming members of its 637-showroom strong dealer network are about to get the axe.
The purge won't just be limited to dealers that aren't performing, though. Mazda will seek to consolidate poorly located dealers and build new showrooms in better locations. It still isn't clear how many dealers are being targeted or at what point Mazda would end its cull.
This consolidation of dealers is all part of a one-two punch for the Japanese brand, that will also see increased marketing efforts in 35 key areas. Of those markets, Mazda is placing a special emphasis on New York and LA, although there's not much mention of what other regions are being looked at.

2014 North American Car and Truck/Utility of the Year finalists announced [w/poll]

The 2014 North American International Auto Show is right around the corner, which means it's high time we found out which cars and trucks would be finalists for the prestigious North American Car and Truck/Utility of the Year awards.
The finalists - three in cars and three in three trucks/utilities - are dominated by American brands, with two-thirds of the finalists hailing from either General Motors or Chrysler (don't worry Ford, there's always next year), while outliers from Mazda and Acura can be found in each contest. Here now is the list of finalists for the big prizes:
2014 North American Car of the Year:

Top Gear recounts the fiery demise of the Mazda Furai

This past September we reported on Top Gear's destruction of the Mazda Furai, one of the finest concept cars to ever grace an auto show stage. It turns out that the Furai, which was burned nearly beyond recognition at the hands of the British magazine, was actually destroyed back in 2008, and that the entire thing had been covered up for five long years.
Now, a few months after publishing that heart-wrenching composite of a half-baked Furai (shown above), the lads at TG have published their account of just what resulted in a priceless concept car being transformed into a smoking hulk on a Suffolk runway. Click over to read the full story about just what happened, along with pictures of the Furai before, during and after the inferno.

Next Mazda MX-5 Miata to weigh a ton(ne), literally

Looking at recent spy shots of the fourth-generation Mazda Miata, it's obvious this sporty little roadster will grow in size compared to the current model, but it's also going on a diet. At the Tokyo Motor Show, Auto Motor und Sport sat down with Mazda executive Kiyoshi Fujiwara, who gave a little more insight into the Miata's redesign.
Fujiwara said that they're aiming for a curb weight of a tonne (metric ton), which is 1,000 kilograms or right around 2,200 pounds, for the next-generation Miata. This would make the roadster at least 300 pounds lighter than the current NC Miata, but still about 200 pounds heavier than the original NA.
There is no indication as to how Mazda will go about removing that much weight from the bigger car, but with as popular as the power retractable hard top (PHRT) model is on the current car, the new Miata may ditch this feature to lose its weight. Improving the power-to-weight ratio appears to be a key goal of the Mazda team, so we also wouldn't be surprised to see a more powerful engine underneath the longer hood.

Next-gen Mazda2 designed for 'predominantly feminine' appeal

We can't ever think of a time we've heard anyone accuse the current Mazda2 of being too edgy, which makes reports of a softer design for the next-gen model a little surprising. Autocar reports that when the new 2 debuts next fall, it will have a "softer, more feminine appeal" than the current design.
This description lends a little more credibility to the Japanese magazine image we saw of the car back in July. Aside from Mazda's Kodo-inspired signature face, that picture did reveal softer lines, especially along the side of the car. This softened styling is to appeal to the car's target market, which Mazda's European design chief is reported to have called a "predominantly feminine customer base." Last we heard, though, Mazda might keep the next 2 out of the US due to slow sales.
The 2015 Mazda2 will reportedly ride on a shortened version of the platform used for the CX-5, but Autocar mentions that its platform could also be the basis of a new subcompact crossover - possibly to go up against vehicles like the Buick Encore and the upcoming Honda Fit-based crossover called the Vezel.