Jeep Cherokee, page #18

Jeep Cherokee Price Analytics

About Jeep Cherokee

Auto blog

Federal grand jury issues subpoenas to U.S. FCA dealers

Despite an attempt to clarify and backtrack, it seems the investigation into Fiat Chrysler Automobile's false sales reporting is picking up steam. According to Automotive News, FCA dealers and regional offices have received subpoenas ordering them to supply documents and testimony to a grand jury in Detroit. Of course, the dealers are objecting to the request. They claim the subpoenas are too broad and would require them to hand over too much personal information, like personal phone numbers of dealer employees going back years. The group wants to make it clear that FCA has clarified its sales reporting and that the issue is with the manufacturer, not dealers. The dealers say that FCA employee records and testimony should be enough. It's rumored that a dealer group is the one that sparked the investigation in the first place. FCA confirmed on July 18 that it indeed was under investigation by a number of federal agencies. Although they've clarified their position regarding sales reporting, the fraud investigation continues full steam. Related Video:

FCA spends $1.5 billion to retool plant for Ram production

Fiat Chrysler Automobiles (FCA) is planning to invest $1.48 billion to retool its Sterling Heights Assembly plant in metro Detroit to build the next generation of the Ram 1500. The investment will allow the assembly plant to go from unibody to body-on-frame construction. FCA also confirmed that production of the Chrysler 200 will end in December in order for the plant to be altered. As previously reported, FCA is looking to move production of the 1500 from its current assembly plant in Warren to the Sterling Heights Assembly plant (both are in Michigan). While FCA has not released any official plans for the Warren Truck Assembly Plant, Automotive News reports that the plant will be retooled to manufacture the Jeep Wagoneer and Grand Wagoneer SUVs. Earlier this month, FCA announced plans to invest $1.05 billion to retool the Jeep Wrangler factory. FCA's current investment plans are part of the automaker's push to put competitive products on the road. Related Video: News Source: FCA, Automotive NewsImage Credit: FCA Plants/Manufacturing Chrysler Jeep RAM SUV Sedan

FCA recalling 323,000 cars for wiring, software issues

The Basics: Fiat Chrysler Automobiles (FCA) is conducting a voluntary recall for an estimated 323,361 cars in the US. The affected vehicles were built after September 23, 2014 and include: the 2015 Chrysler 200, Ram ProMaster City, Jeep Renegade, and 2014 and 2015 Jeep Cherokees. The Problem: An insufficient crimp in the vehicles' wiring harness may result in a solenoid fault code, which could cause the engine to stop. The loss of power could lead to an accident. Injuries/Deaths: None reported. The Fix: FCA will update the affected vehicles' software and replace wire harnesses, as needed. According to FCA, owners that experience the problem can temporarily resolve the issue by restarting the vehicle. If you own one: FCA is reaching out to owners to schedule a service. Related Video: Statement: Wire Harness Crimp July 22, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 323,361 vehicles in the U.S. to update certain software and replace wire harnesses, as needed. An examination of warranty data led to an FCA US investigation that discovered an insufficient crimp in a wire harness. Such a crimp may lead to a solenoid fault code that can cause propulsion loss. The Company is unaware of any related injuries or accidents. Most vehicles in the recall population will not experience this fault code over their lifetimes. However, should the condition occur, it can typically be temporarily resolved by stopping the vehicle and re-starting its engine. Accordingly, FCA US urges customers to heed the instructions on their recall notices. Affected are certain model-year 2015 Chrysler 200 midsize sedans, Ram ProMaster City small vans, Jeep Renegade and Cherokee SUVs. Certain model-year 2014 Cherokees are also affected. A change made in the harness-manufacturing process eliminates the need to recall any vehicle built after Sept. 23, 2014. An estimated 35,511 additional vehicles in Canada are included in the campaign; as are 7,067 in Mexico; and 43,927 outside the NAFTA region. Customers will be advised when they may schedule service. Those with questions may call the FCA US Customer Care Center at 1-800-853-1403. News Source: FCAImage Credit: AOL Recalls Chrysler Jeep RAM FCA jeep renegade ram promaster city

FCA fibbed on sales according to internal report

Following last week's news that Fiat Chrysler Automobiles (FCA) is under investigation by the Department of Justice and Securities and Exchange Commission for allegedly fudging sales figures, a new report in Automotive News says an internal investigation at FCA uncovered misreported sales. According to the AN story, 5,000 to 6,000 vehicles from various FCA brands were reported sold by dealers, but no customers existed for those cars. FCA sales chief Reid Bigland has already put a stop to the practice. One potential reason for the practice was to maintain the company's month-to-month sales increase streak, currently at 75 months. In April, FCA added a lengthy disclaimer to its sales announcements: "FCA US reported vehicle sales represent sales of its vehicles to retail and fleet customers, as well as limited deliveries of vehicles to its officers, directors, employees and retirees. Sales from dealers to customers are reported to FCA US by dealers as sales are made on an ongoing basis through a new vehicle delivery reporting system that then compiles the reported data as of the end of each month. "Sales through dealers do not necessarily correspond to reported revenues, which are based on the sale and delivery of vehicles to the dealers. In certain limited circumstances where sales are made directly by FCA US, such sales are reported through its management reporting system." FCA did not provide comment to Automotive News. Click through for the full story and more details. Related Video: Earnings/Financials Government/Legal Chrysler Dodge Fiat Jeep RAM sales Sergio Marchionne FCA USDOJ reid bigland

It lives! Our first glimpse of the Jeep Wrangler pickup

Okay, it's real now. We've been hearing rumors for years, and Jeep officials have confirmed a pickup will be added to the next-gen Wrangler lineup, but now we have our first photographic evidence of the long-awaited variant. It looks huge, and we're totally okay with that. These photos show a very-long-wheelbase Wrangler with a decent-size pickup bed. It looks to be about the same overall size as the AEV Brute Double Cab Wrangler pickup conversion, which itself is about the length of a Suburban. The bed appears to be in the five-foot range, maybe slightly shorter than the standard box of a half-ton truck. And those taillights, or at lest the covers on them, recall the shape of the lights on a Ram. These overhead shots also give a better look at the next Wrangler's evolved seven-slot grille. We see bigger spacing between thinner ribs, which would seem antithetical to the goal of improving the Wrangler's traditionally poor aerodynamics. It's possible FCA is using an air shutter to manage airflow, as it does on the Ram pickups and some other products. Related Gallery 2018 Jeep Wrangler Detailed Spy Photos View 18 Photos To recap what we know about the next Wrangler: It's expected to offer a gas V6 once again, as well as a turbocharged four-cylinder nicknamed Hurricane and an EcoDiesel-branded diesel engine. There have also been rumors of a hybrid powertrain. We don't yet know how many of those engines will make it to the pickup, but at least one gas engine and the diesel are safe bets. People love the idea of diesel Jeep pickups. We also know from interior spy photos that at least some of those new powertrains will use an eight-speed automatic. That, the modern engines, and improved aero will help the Wrangler be more efficient while still retaining much of its rugged, blocky look. The two- and four-door Wranglers are expected for the 2018 model year, with the pickup following for 2018 or 2019. Related Video:

Jeep's 75th Anniversary Wrangler Salute rolls down the line

UPDATE: The commemorative 75th Anniversary Jeep Wrangler rolled down the assembly line in Toledo, Ohio today. With its roll bar, doors, and rear seat removed, it really does pay fitting tribute to the classic Willy military models of the past. The 419 area code stenciled on the bumper and date on the hood look period appropriate. Well done, Jeep. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's difficult to pinpoint exactly when the Jeep Wrangler was born, but the automaker claims the legendary off-roader as we know it today was officially created in 1941. On July 15th of that year, the US Government awarded Willys-Overland with a contract to build the Willys MB, which quickly got the nickname "jeep". To commemorate its 75th anniversary, Jeep has created a WWII-themed Wrangler that pays homage to the Willys MB. The gorgeous concept most likely won't see the road, which is a shame as the rugged one-off yanks at the heartstrings of truck enthusiasts and historians alike. Based on of the current Wrangler Sport, the olive-drab Wrangler 75th Salute concept imitates the original Willys MB to the tee. The concept has no B-pillars, no doors, no roll bars and honors the "function over form" styling of the original military vehicle. The concept rides on 16-inch steel wheels that are wrapped in 32-inch non-directional tires and features vintage-looking hood latches, steel front and rear bumpers with tow hooks, and low back canvas seats. The Salute concept will be built on the same assembly line in Toledo, OH that has produced the Wrangler for decades. In addition to putting out an image of the concept, Jeep also touched on the rich history of the original Willys MB, which you can read below. Related Video: In July 1940, the U.S. military informed automakers that it was looking for a "light reconnaissance vehicle" to replace the Army's motorcycle and modified Ford Model-T vehicles. The Army invited 135 manufacturers to bid on production and developed a lengthy specification list for the vehicle, including a 600-lb. load capacity, wheelbase less than 75 inches, height less than 36 inches, smooth-running engine from 3 to 50 miles per hour, rectangular-shaped body, four-wheel drive with a two-speed transfer case, fold-down windshield, three bucket seats, blackout and driving lights and a gross vehicle weight below 1,300 lbs.

Jeep Wrangler production in Toledo to nearly double by 2018

The Jeep Wrangler's future in Toledo, OH, is officially secure. FCA US announced plans on Thursday to spend $1.05 billion to retool the Wrangler factory and another site in Illinois to build Jeeps. The investment could add up to 1,000 jobs, and, according to The Detroit Free Press, allow Jeep to build as many as 450,000 Wrangler models in Toledo. FCA is investing $700 million to make over the Toledo North factory to build the next-generation Wrangler – a vehicle that's hotly anticipated by enthusiasts. FCA said this will add about 700 new jobs. The Wrangler factory is part of a multi-site complex in Ohio, and FCA said an announcement about the South factory will come later. Nearly two years ago, FCA chief executive Sergio Marchionne touched off a firestorm by suggesting the Wrangler could leave Toledo, though plans to keep the iconic Jeep there quickly proceeded. Automotive News reports the new Wrangler will use some aluminum elements, run a turbo four-cylinder engine, and offer a diesel variant. Designers will also pay increased attention to aerodynamics, though maintain the Wrangler's familiar appearance. Additionally, FCA reportedly plans to build a Wrangler pickup in Toledo. That 450,000-vehicle threshold could potentially break down into 350,000 traditional Wrangler models, along with another 100,000 Wrangler-based pickup trucks. When the current Toledo plant was opened in 2005, Chrysler said its capacity was about 150,000 vehicles per year. Since then, that figure has increased to about 240,000 Wranglers yearly, and Jeep has no problem selling that many. FCA's factory in Belvidere, IL, gets $350 million for upgrades to produce the Jeep Cherokee, which moves there in 2017 from Toledo as part of a product shuffle. FCA builds the Dodge Dart and Jeep's Patriot and Compass in Belvidere. The automaker is killing the Dart and will replace the compact Jeeps with a single model next year. The moves are part of FCA's strategy to fortify the Jeep brand, which has posted healthy sales and enjoys a strong reputation around the world. Related Video:

FCA will pay you to hack its systems

FCA is willing to pay you to hack its cars, as long as you tell the company how you did it. In an effort to enhance cybersecurity and prevent future incidents like the Jeep Cherokee hack last year, FCA announced it's working with Bugcrowd to find vulnerabilities in its vehicle software. Bugcrowd labels itself as a crowdsourced application security testing company. Users, or independent security researchers as Bugcrowd calls them, can find exploits or vulnerabilities in FCA systems. They then submit the information to Bugcrowd, who in turn supplies the info to FCA. The goal is to update systems and close any possible security breaches. FCA is offering bounties from $150 to $1,500 to any Mr. Robot types, with payment based on the size and severity of the flaw. FCA wants hackers to focus specifically on the UConnect website and the company's iOS and Android apps. No bounties will be given for anything outside the scope of those three things. Bugcrowd says it will not take any legal action against anyone who submits an exploit. While we think it's good that the company is taking steps to address these problems, it's not a groundbreaking maneuver. Other companies employ similar systems. Earlier this year, both Tesla and Uber announced that they're willing to offer up to $10,000 to hackers who find vulnerabilities in their system. For years, Microsoft has been paying hackers to find exploits. It also seems that FCA took its time to announce this plan, considering the Jeep hack happened nearly a year ago. If the partnership works, we can expect other automakers to make similar deals. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: FCA, Bugcrowd Jeep Safety Technology Infotainment Smartphone FCA

FCA believes thieves aren't getting into Jeeps with laptops

Last week, we reported on an incident where thieves stole a 2010 Jeep Wrangler from an owner's driveway in Houston, TX with nothing but a laptop. While the security footage made it seem like the perpetrator hacked into the vehicle, we had a conversation with FCA's senior manager of security architecture Titus Melnyk who set the record straight. According to Melnyk, the thief in the video isn't using the laptop to get into the vehicle, but rather as a means of coding a blank key fob and then using that fob to get into the Jeep. According to Melnyk, the suspects have gained access to a key programming tool, which allows them to pair blank key fobs to FCA vehicles. With the key fob now coded, the suspects can get into the vehicle and drive away. The thieves, believes Melnyk, have acquired the programming tool through a dishonest dealership or locksmith. Since the suspects are using a process designed to be used (honestly) by dealers, FCA doesn't consider this to be hacking and believes that there are no security flaws in the vehicles. How are the thieves getting key fobs? While Melnyk believes it is possible to recode an existing key fob, he points out that it's much easier to purchase a blank key fob on Ebay for less than $25. FCA is working closely with the Houston Police Department to apprehend the suspects. Related Video: Jeep Technology SUV Videos viral video hacking thieves

Jeep CEO details the next Wrangler's push for efficiency

Jeep CEO Mike Manley's brief for the new Wrangler is a simple one – don't mess it up. But in that pursuit of keeping things proper, the affable Englishman has revealed that the brand is trying to walk a fine line while bringing its most iconic model into the 21st century. That's most important on the car's exterior. Like other long-serving American vehicles, the Wrangler is defined by its image. But even with aerodynamics playing a bigger role on the JK's successor, Manley was adamant during a conversation with Automotive News that the boxiness will carry on. "You have to be very careful with the aero of Wrangler, because at the end of the day, it needs to be recognizable as a Wrangler," Manley told AN. "To some extent that restricts you on some of the aero that you can do." Spy photos show a more rakish windshield and fascia, both key moves to lessen the aerodynamic impact of the Jeep's traditionally brick-like design. "But with weight and a number of the changes that we've made, you're going to see that we've really pushed that vehicle forward in terms of its fuel economy." The context of that last sentence points to a weight savings, something Automotive News backs up. While the Wrangler won't go all-aluminum, its frame is going to be lighter and stronger, and it will use aluminum for certain "hang-on" body parts. But this push for weight savings won't extend to the Wrangler's intangibles. It'll still ride on a body-on-frame architecture and feature solid axles at both ends, for example. Combine Manley's comments and AN's reports with news that the Wrangler will use an eight-speed automatic and offer diesel and four-cylinder turbo power in its next generation, and it's clear Jeep is trying to make the biggest strides in decades without alienating its die-hard fans. Related Video: Featured Gallery 2018 Jeep Wrangler Detailed Spy Photos View 18 Photos News Source: Automotive News - sub. req.Image Credit: KGP Photography Green Jeep SUV Off-Road Vehicles Mike Manley