GMC Sierra 2500, page #14

GMC Sierra 2500 Price Analytics

About GMC Sierra 2500

Auto blog

AWD turbodiesel Equinox, Terrain dropped for 2020

Citing low demand, General Motors is dropping the AWD diesel options off the Chevrolet Equinox and GMC Terrain roster. Chevrolet spokesman Kevin Kelly confirmed to CarsDirect that for 2020, the diesel versions of these SUVs will only be offered with front-wheel-drive. CarsDirect notes that with the AWD diesel Equinox and Terrain gone, the only AWD diesel option in this class is the Mazda CX-5 Skyactiv diesel, which is significantly more expensive: As the AWD diesel CX-5 is only available in a fully loaded Signature specification, the $42,045 price tag is almost $10k heftier than the cheapest comparable Equinox, the AWD 1.6-liter diesel LT which starts from $32,495. The 2019 GMC Terrain AWD SLE costs $34,795 in comparison, which works out to being around $7,200 cheaper than the Mazda. The higher trim levels for the Equinox and Terrain are Premier and SLT, respectively. Some reasoning behind the AWD diesel GM SUV's low uptake is their own price difference to base FWD gasoline models: you can get a 1.5-liter Equinox for less than §25,000 listed. While the 2.2-liter Mazda has plenty more power at 168 hp and 290 lb-ft, compared to 137hp and 240 lb-ft in the 1.6-liter GM SUVs, the Equinox and Terrain are notably more frugal – they are rated 32mpg combined, while the Mazda can manage 28 mpg. With better fuel economy and a significantly lower list price, the General Motors twins are at least more wallet-friendly when it comes to numbers, and as the vehicles will cease to be built in that configuration there's likely to be some cash on the hood on ones in stock. News Source: CarsDirectImage Credit: Chevrolet Chevrolet GM GMC confirmed gmc terrain chevrolet equinox

Mary Barra reportedly confirms GM's electric pickup truck plans

According to Motor Authority, CEO Mary Barra confirmed General Motors' intentions to build an electric pickup truck this week. Whether or not it would be an all-new vehicle is unknown. The news comes not even a week after Ford announced a $500 million investment in electric-vehicle startup Rivian. First, electric powertrains were integrated into cars. Then came the crossovers and the SUVs. Naturally, then, the next wave will be pickup trucks. Ford is set to produce an electric F-150, Rivian has the R1T, and now General Motors has reportedly confirmed its plans to introduce a competitor into the field. The article says the topic was brought up in a recent investor call as part of a brief overview of the automaker's electrification strategy. That's where the details end, however, as there is no indication of a timeline, what GM brand would carry the truck, or whether it would be an entirely new product or an adaptation of a current model. The latter seems most likely, which points to the Chevrolet Silverado or the GMC Sierra as possibilities. Chevrolet has been GM's electrification leader this decade with the Bolt and Volt, so an electric Silverado would align well with that messaging and branding. However, an electric pickup would likely be a pricier premium product, which could align it better with GMC. Autoblog has reached out to GM for comment and will update this space when we get a response. Green Rumormill Chevrolet GMC Truck Electric Future Vehicles Mary Barra electric truck chevrolet silverado

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GM faces possible class action lawsuit over 8-speed transmission

General Motors has been hit with a class-action lawsuit from owners who allege the eight-speed automatic transmission found in several rear-wheel-drive Chevrolet, Cadillac and GMC models between the 2015 and 2019 model years has a defect that causes the vehicles to hesitate and jerk when accelerating or slowing down. The lawsuit was posted to ClassAction.org and spotted by GM Authority. Problems with GM's Hydra-Matic 8L90 and 8L45 transmissions have been well-documented on Internet forums and via complaints filed with the National Highway Traffic Safety Administration, with many reporting damage to their vehicles. The lawsuit was first filed in December in U.S. District Court for the Southern District of Florida but appears to have been transferred recently to New York. Autoblog sought comment from Theodore Leopold, the lead attorney for the plaintiffs. "These transmissions have a common defect," the complaint reads. "Drivers attempting to accelerate or decelerate their cars feel a hesitation, followed by a significant shake, shudder, jerk, clunk, or 'hard shift' when the vehicle's automatic transmission changes gears." The problem also occurs when the vehicles accelerate in a single gear, without shifting, the plaintiffs allege. "Drivers have reported that the shift is sometimes so violent, they feel as though they have been hit by another vehicle." The problem is believed to center on the transmission, torque converter or both. The complaint says it causes undue friction, causing hydraulic systems and gears to function improperly and sometimes leaves metal shavings throughout the transmission, leading to costly repairs and replacement of parts or the entire transmission. It says GM has known about the problems since shortly after it introduced the transmissions, and has issued 13 technical service bulletins, none of which have resolved the problem. GM declined to comment on the lawsuit. The plaintiffs say GM should have warned consumers about the issues and covered repairs under each vehicle's three-year/36,000-mile bumper-to-bumper warranty. They're seeking statewide classes in at least six states: California, Florida, Illinois, New York, Oklahoma and Texas.

GMC Syclone pickup returns via Special Vehicle Engineering

The original GMC Syclone was a 1991 mid-size Sonoma pickup turned muscle truck. Its heavily modified 4.3-liter V6 sported a turbocharger, intercooler, and modified internals, raising output to a Corvette-baiting 280 horsepower and 350 pound-feet of torque. The engine was paired with a four-speed automatic, rear-biased all-wheel drive, and four-wheel antilock brakes (the coming thing). With an all-black livery and a lowered ride height, the Syclone looked the business, and backed up those looks with a 0-to-60 time of 4.3 seconds and a 13.4-second quarter-mile, according to contemporary magazine testing. Given all the recent interest in high-performance pickups, it's amazing that GMC hasn't revived the Syclone. But where manufacturers leave an opening, the aftermarket steps in — in this case that's Specialty Vehicle Engineering, which as CNET reports is resurrecting the nameplate for a build of 100 new Syclones, based on the GMC Canyon, which will update the idea a lot more horsepower. The 2019 Syclone takes as its starting point the extended-cab version of the Canyon. The engine is again a V6, this time a 3.6-liter fitted with a supercharger and a custom cat-back exhaust system, upping output to 455 ponies from the stock 306. SVE's Syclone can be had with rear- or all-wheel drive, and it, too, features upgrades to the brakes and chassis. Six-piston front calipers are fitted in place of the standard four-piston units, and the slotted front rotors are upsized from 12.2 inches to 13.6. The suspension is lowered by two inches up front and five inches at the rear, with stiffer traction bars, bushings, dampers, and a heftier rear anti-roll bar. Unlike the original, the modern Syclone can be had in colors other than black — any of the standard Canyon hues are available — but the appearance is customized with rocker-panel extensions, body-color grille and rear bumper, and a composite hood insert. The interior gets embroidered logos and badges, including a numbered plaque on the dash. The price for the Syclone is $39,995 — that's for the package, on top of the cost of the truck. But at least ordering is easy: The Syclone package can be ordered through select GMC dealers.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2020 Ford Escape hybrids vs other crossover fuel sippers: How they compare on paper

Along with a new generation of Escape, Ford also reintroduced the world to the 2020 Ford Escape Hybrid. And if that weren't enough, Ford is adding a plug-in hybrid version. This is a sign of the times: people are more crossover crazy than ever, but are also seeking ways to use less fuel, whether it's for environmental or purely money-motivated reasons. The Ford hybrids aren't the only fuel-efficient compact crossovers on the market. They will be going head-to-head with conventional hybrids including the 2019 Kia Niro, 2019 Nissan Rogue Hybrid and 2019 Toyota RAV4 Hybrid. There are other plug-in hybrids including the 2019 Subaru Crosstrek PHEV, 2019 Mitsubishi Outlander PHEV and the plug-in version of the 2019 Kia Niro. There are even a couple diesels in the form of the 2019 Chevy Equinox and 2019 GMC Terrain. So we've rounded up the details on all these crossovers to see who leads and lags in criteria such as power, fuel efficiency, space and price. Check out all their details below. 2019 Subaru Crosstrek Hybrid View 68 Photos How do their engines and fuel economy compare? Conventional Hybrids and Diesels Let's face it, if you're buying one of these crossovers, one of the things that matters most to you is just how frugal with fuel they are. We'll start off with the conventional hybrids and diesels, and the clear victor is the Kia Niro, which in base FE trim, manages to hit 50 mpg combined. This is thanks to it sharing its powertrain with the Hyundai Ioniq, the Hyundai equivalent of the Toyota Prius. Buyers should take note that only the FE returns such high fuel economy. The LX and EX drop to 49 mpg, and the S Touring and Touring get 43. Even then, the least efficient Niro is the most efficient of the normal hybrids and diesels. It is nearly the least powerful, though, with 139 horsepower. Just behind it is the Toyota RAV4 Hybrid. It delivers 40 mpg combined, and it has an ace up its sleeve: it comes standard with all-wheel drive. Every other vehicle in this powertrain group has front drive standard, and the Niro isn't available with all-wheel drive at all. If that weren't enough, the RAV4 Hybrid also boasts the most power at 219 horses. While we can't say anything about Escape Hybrid fuel economy, we do know that it will make 198 horsepower, which is close to the class-leading RAV4. The least powerful of these is the Equinox and Terrain, and they return the worst fuel economy at 32 mpg.

Auto sales in March and first quarter down nearly across the board

Nearly every major automaker reported weak U.S. sales for March and the first quarter of 2019, citing a rough start to the year, but said a robust economy and strong labor market should encourage consumers to buy more vehicles as 2019 rolls on. GM, which no longer releases monthly sales figures, saw first-quarter sales fall 7 percent, with declines across all brands. Sales of Silverado pickup trucks fell nearly 16 percent and the high-margin Chevy Suburban large SUV dropped 25 percent. Ford also no longer releases monthly sales numbers, but is due to release its first-quarter sales figures on Thursday. According to industry data, Ford's sales fell 2 percent in the quarter and 5 percent in March. Ford representatives did not immediately respond to requests for comment. FCA reported a 7 percent fall in U.S. sales in March and a 3 percent drop for the first quarter. All of FCA's brands dropped in March, except for Ram, which saw a 15 percent increase in pickup truck sales. "The industry had a tough first quarter, but with spring finally starting to show its face and continued strong economic indicators ... we are confident that new vehicle sales demand will strengthen going forward," FCA's U.S. head of sales, Reid Bigland, said in a statement. Toyota reported a 3.5 percent fall in U.S. sales in March and 5 percent for the first quarter, hurt by declining demand for its Corolla sedans and Camry vehicles. "While some of our competitors are abandoning sedans, we remain optimistic about the future of the segment," Toyota said in a statement. Nissan posted a 5.3 percent drop in sales in March, and its first-quarter sales were down 11.6 percent. Honda and Hyundai bucked the trend. Honda's U.S. sales rose 4.3 percent in March and 2 percent in the quarter, while Hyundai's were up 1.7 percent and 2.1 percent, respectively. Passenger-car sales suffered throughout the January-March quarter compared with the same period in 2018 as Americans continued to abandon them in favor of larger, more comfortable pickup trucks and SUVs, which are far more profitable for automakers. The battle for market share in the particularly lucrative large-pickup truck market intensified in the quarter, as Fiat Chrysler Automobiles' Ram brand outsold the U.S.' No. 1 automaker General Motors' Chevrolet-brand trucks. The two automakers have both launched redesigned pickup trucks.

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

2020 GMC Acadia refresh brings a new engine, AT4 trim level

It's mid-cycle refresh time for the GMC Acadia, and the updated 2020 model kicks off its changes with a new face. It has a square-jawed grille seemingly pulled straight off the Sierra full-size pickup, and the size is amplified by the slender new LED headlights on either side. At the rear, the LED taillights are taller and more chiseled. A new AT4 trim level adds more visual distinction with black trim and wheels, plus all-terrain tires to make it a little more capable off road. The AT4 also boasts standard all-wheel drive. Under the revised skin, the Acadia hides one of two carryover engines, or a new turbocharged 2.0-liter inline-4. This new engine makes 230 horsepower and 258 pound-feet of torque with the help of a twin-scroll turbocharger. To make it more frugal, it's able to deactivate two of its four cylinders. The turbo engine is standard issue on the SLT and Denali trim levels. The carryover engines include a naturally aspirated 2.5-liter 4-cylinder making 193 horsepower and 188 pound-feet of torque, and a naturally aspirated 3.6-liter V6 making 310 horsepower and 271 pound-feet of torque. The V6 is standard equipment on the AT4 trim. No matter the engine, all 2020 Acadias get a 9-speed automatic transmission. The new transmission also ditches the current Acadia's mechanical shift lever in favor of an electronic shifter with the Terrain's mix of buttons and triggers. It does free up space between the seats, but the button arrangement is still as strange as it was when we first saw it in the smaller crossover. There are a handful of other little upgrades to mention. The suspension has been revised for greater comfort; the infotainment has been revised with a bigger screen, USB-C inputs and customizable profiles; and wireless phone charging is now an option. The updated Acadia goes on sale this fall, and pricing will probably be announced close to launch.