GMC SLT, page #26

Auto blog

Roadkill pits every project car against each other

The guys behind Motor Trend's monthly Roadkill series have collected nine of their favorite project cars from their videos and pitted them against each other in a battle royale to determine a winner. It's 44 minutes long, but it's completely worth the investment of time.
The cars run the gamut from a 1973 Chevrolet Ramp Truck, a 1975 AMC Pacer and a legitimately impressive 1967 Chevy Camaro, and they are pitted against each other to see which is the fastest around an autocross course. The drivers include Roadkill's two hosts and Motor Trend's Johnny Lieberman and Carlos Lago. It's reminiscent of the best episodes of Top Gear and worth a watch.
So it's the weekend - the perfect time to relax. Grab your preferred beverage, get comfortable and enjoy 44 minutes of some seriously ratty but utterly cool project cars as they are throttled within an inch of their lives (or past it). Scroll down to check out the video.

GM readying aluminum-body fullsize pickups

Ford's extensive use of aluminum in its 2015 F-150 is a big deal. A really big deal. Big enough, in fact, that General Motors is reportedly changing its fullsize pickup strategy. According to The Wall Street Journal, The General has locked in partnerships with Alcoa Inc. and Novelis Inc. - companies that will supply aluminum for the next-generation Chevrolet Silverado and GMC Sierra trucks.
"Ford's introduction of the 2015 F-150 pickup truck was a game changer, and it's the first, not the last, conversion of this type," Novelis spokesperson Charles Belbin told the Journal. The switch to aluminum has allowed Ford to shave roughly 700 pounds off its fullsize truck's curb weight. And while official mileage ratings have not been announced, the weight loss should go a long way for improving efficiency, especially when combined other efficiency-minded improvements including better aerodynamics and new, turbocharged V6 engines.
Of course, aluminum-bodied cars are nothing new. But extensive use of aluminum in a major, best-selling product like the Ford F-150 is expected to kick off widespread use of this weight-saving material as availability rises and cost decreases. The WSJ reports that GM had originally explored the idea of moving to aluminum pickups back in 2008, but abandoned the idea due to cost concerns amid economic woes.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper.
For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011.
The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.

GMC to get own model not shared with Chevy?

For years, GMC has existed as a brand without a single unique product, reconstituting Chevrolet trucks, SUVs and crossovers with more frosting in exchange for a few extra dollars. The Sierra is a Silverado, the Acadia a Traverse, and the Terrain an Equinox, although admittedly the latter pair are visually differentiated to a significant degree.
GMC could be set to expand beyond its Chevy-based roots, though. During last week's Detroit Auto Show press days, GM's product boss Mark Reuss was asked whether there'd ever be a GMC that wasn't taken from Chevy. "Oh, yes, you will," Reuss told the media. "The health of GMC is astonishingly good from a consideration standpoint." Reuss wouldn't elaborate on what the model could be, although we're quite happy to make some guesses. GMC has its bases fairly well covered, with a mid-size and full-size crossover, as well as a mid-size, full-size and HD pickup. We doubt GMC will be building a family sedan, sports car, or hatchback, so really, the only place we can see the brand going is into a smaller crossover.
Automotive News points out that the most recent small GMC showcar, the 2010 Granite concept (shown above), won't see production according to General Motors. That vehicle likely would have rode on GM's compact vehicle architecture, known internally as Gamma II, which underpins the Chevy Spark and Sonic, as well as the Buick Encore (and its overseas Opel/Vauxhall/Chevy counterparts).

Despite strong profits, GM still fighting flat market share

Looking at the progress General Motors has made since it entered bankruptcy, it's easy to forget that the company still has a long way to go before it's the juggernaut it once was. A recent report from Reuters points out that, while GM is making money, it isn't making any gains in terms of US market share. Quite the opposite, really. Consider this factoid: In 1963, nearly half of the cars sold in the United States were from Chevrolet, Cadillac, Buick, GMC or Pontiac. Now, the company's US market share is stagnant at 17.9 percent. That same number is half of just Chevy's 1963 market share. This is all despite GM going on a binge replacing or updating its models. "Market share increases are not instantaneous," Mark Reuss told Reuters at the 2014 Detroit Auto Show. "We've got a lot of baggage. Don't underestimate what people though of us, or these brands, through these hardships and 30 years." The reasons for the stagnant market share are numerous. Reuters points out that retooling of factories and a focus on limiting incentives are both good things for profit, but not necessarily for market share. There's also the troubling turnover of the brand's marketing department. These issues don't change the fact that Chevrolet has lost 1.4 percent of its market share in two years, and that Cadillac - arguably GM's most improved brand overall - has lost 1.2 percent in the same period. Part of that can be blamed on GM's avoidance of fleet sales in favor of more profitable customer sales. "Our focus has really been on retail and that's where we've got the growth," said Alan Batey, GM's interim global marketing boss. "We want to grow GM and that means growing market share and profits, but it's not at all costs," Reuss said. News Source: ReutersImage Credit: paul bica - Flickr CC 2.0 Earnings/Financials Buick Cadillac GM GMC sales profits

2015 GMC Canyon gets the party started [w/video]

The 2014 Detroit Auto Show press days officially kick off tomorrow, but the night before all the madness commences, General Motors drove its new 2015 GMC Canyon pickup truck out for all to see. To refresh your memory, the Canyon is GMC's new midsize pickup - essentially a re-skinned version of the Chevrolet Colorado that debuted at the LA Auto Show in November.
Many of us at Autoblog prefer the look of the larger GMC Sierra to that of its Chevy Silverado kin, and we're having similar feelings about the new Canyon, especially after seeing it in person. It's sort of a pint-sized version of the Sierra, and it looks great. Clean lines are found throughout, and the Canyon's styling is decidedly premium.
At launch, the Canyon will be offered with the same engines as the Colorado - a 2.5-liter inline four-cylinder engine with 193 horsepower and 184 pound-feet of torque on the base end, and a larger 3.6-liter V6 with 302 hp and 270 lb-ft as an option. The Colorado's 2.8-liter diesel inline four-cylinder will be available after launch. Both two- and four-wheel drive configurations will be available, depending on the model.

2015 GMC Canyon is a Chevy Colorado in Sierra clothing [w/video]

Ford may not offer the Ranger in America anymore, nor Dodge (or Ram) its Dakota. But General Motors - not unlike Toyota with its Tacoma and Nissan with the Frontier - isn't about to give up on the midsize pickup market. Less than two months ago, it revealed the new Chevrolet Colorado, and now it's following up with its mechanical twin, the 2015 GMC Canyon.
Launched today ahead of its reveal at the Detroit Auto Show, the Canyon slots into the GMC lineup (and differentiates itself from its Chevrolet twin) with styling that closely apes the larger GMC Sierra 1500 and Sierra HD, only a size or two smaller. Oh, there are visual differences, like a subtly different grille treatment and lower fascia, but it still maintains its big brother's square-jawed good looks and rectilinear flared fenders.
Two aluminum-block engines with direct injection and variable valve timing are available: a 2.5-liter inline-four comes standard with 193 horsepower and 184 pound-feet of torque, and a 3.6-liter V6 is available with 302 hp and 270 lb-ft. Buyers will also be able to choose between three bodystyle configurations, three trim levels and either two- or four-wheel drive. A six-speed automatic transmits the power to the road, but a six-speed manual is available on the base model with the 2.5 and 2WD, and there's an All Terrain package available on SLE models. A diesel is expected later.

370,000 new Silverado and Sierra pickups recalled over fire risk

General Motors announced late Friday that it will recall around 370,000 Chevrolet Silverado and GMC Sierra fullsize pickups from the 2014 model year over a possible fire risk. The recall covers select 4.3-liter V6 and 5.3-liter V8 models, which can evidently suffer engine compartment fires due to the overheating of exhaust components. GM notes that the fire issue may be preceded by a check engine light and an "engine power reduced" message on the driver information display.
Thus far, GM is aware of eight fires stemming from this problem (although only three of those incidents affected customer-owned vehicles), and all of the fires were reported in areas with "very cold weather." GM is urging owners to not leave their vehicles unintended while idling. No injuries have resulted from the fires in question.
The Detroit-based automaker has pledged to start mailing out recall letters on January 16. The fix, which involves software reprogramming, is estimated to be a 20-minute repair, and will be made free of charge.

GM's 2014 Trucks Receive Five-Star Crash Rating

This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The highly-anticipated 2014 Chevrolet Silverado 1500 and GMC Sierra 1500 received Overall Vehicle Scores of five stars from the National Highway Traffic Safety Administration's New Car Assessment Program, the highest possible safety rating. They are the first pickup trucks to receive a five-star rating since more rigorous safety standards were implemented in 2011, according to Autoblog. General Motors said in a written release that new technologies, ultra-high-strength steels and six standard airbags helped the automaker improve the truck's performance in crashes. Related Gallery Ford, Chrysler Offer Power With Smaller Engines In New Trucks GM GMC Safety