Ford amscreen67, page #96

Auto blog

Roush getting back into sport compact business with Focus ST mods [w/video]

Roush Performance offers a whole raft of parts for folks looking to tune their Ford Mustang and F-150 models, and now Focus owners can start getting in on the hotted-up action, too. Owners of the 2012-13 Focus and 2013 Focus ST can now get a Roush cold-air intake system, and ST owners can also opt for a high-performance cat-back exhaust.
Although all of these components are now available for order, the parts will ship sometime in July; no word yet on pricing. Down the road, Roush will also offer styling upgrades for the Focus as well as performance tuning upgrades such as engine controller, suspension, wheels and tires. Scroll down for a quick video of what the Focus ST exhaust sounds like, as well as a Roush press release.

Ford F-150 EcoBoost in NHTSA probe for acceleration issue

According to Automotive News, the National Highway Traffic Safety Administration is launching a probe into 400,000 Ford F-150 models over possible acceleration problems. According to the article, NHTSA has received 95 reports "alleging incidents of reduced engine power during hard accelerations" on 2011 to 2013 F-150 models equipped with the company's 3.5-liter EcoBoost V6 engine.
Automotive News reports that Ford has issued three technical service bulletins "related to intermittent stumble/misfire on acceleration from highway cruise in humid or damp conditions," according to the government agency's documents. About one third of the 95 reports NHTSA has received cited humid or rainy conditions when these problems allegedly occurred.
These technical service bulletins have allowed dealers to address a "condition related to moisture accumulation in the charge air cooler during extended highway cruising at constant throttle in humid or damp conditions," AN reports, citing NHTSA documents. Furthermore, the TSB outlines details for "reprogramming the powertrain control module with the latest calibration and installing a new CAC and air deflector plate."

Ford Mustang Shelby GT500 has a bit of a dyno issue

We're of the mind that each and every dyno should come with Murphy's Law painted in big, visible letters down the side. For every ten successful dyno runs out there, it seems there's one where events to horribly wrong. Take, for example, the video below. The clip shows what happens when a Ford Shelby GT500 and a mobile dyno have a bit of a disagreement at the Performance Expo 24 in Sherbrooke, Quebec. We won't spoil the results for you, but we will say there's some substantial carnage involved.
It's unclear just how much damage ensues from the dust up or whether anyone was harmed in the incident, but from the looks of things, everyone made it out without serious injury. If only we could say the same for the machines involved. Check out the video below.

Daimler consulting with Ford about 3-cylinder engines

Soon enough, Ford will offer its 1.0-liter EcoBoost three-cylinder engine under the hood of the Fiesta here in the United States, building on the success of the small powerplant overseas. In fact, this success has caused other automakers to take notice, and according to Automotive News Europe, Daimler is now talking to Ford about this engine for use in its own products.
In other markets, Ford offers the 1.0-liter mill under the hood of the Focus (we had the chance to sample this package on our home turf), as well as the B-Max MPV. For this new collaboration, Daimler would use the turbo-three in the next-generation Smart ForTwo, as well as the Renault Twingo, which the German automaker will be collaborating on as part of its alliance with Renault-Nissan. Speaking to AN, a Mercedes-Benz engineer called the 1.0-liter mill an "interesting and impressive engine."
In exchange for details about the EcoBoost inline-three, Daimler will supply Ford with information regarding its Euro6 stratified lean-burn gasoline engine, which is found in the new E-Class sedan.

Automakers donating money, vehicles and supplies to Oklahoma tornado relief effort

Judging by the destruction the Oklahoma City area experienced earlier this week, residents are going to need a lot of help in coming months. Fortunately, a number of automakers - including General Motors, Ford, Chrysler, Volkswagen, Honda and Toyota - have stepped up to donate money, supplies and vehicles to aid in the recovery and rebuilding processes.
Here's a quick rundown of which automakers have pitched in and what each contributed so far:
Ford Motor Company has donating $250,000 and a Transit Connect to the American Red Cross, and it will match all other donations made to the Red Cross (up to $250,000) using a special URL tied to the latter's website (link here). Additionally, its local Oklahoma dealers have thrown in an extra $150,000 for the United Way and the automaker will be offering an extra $500 toward the purchase of a new Ford vehicle.

Ford to cease Australian automaking operations after 90 years

Ford began manufacturing cars in Australia in 1925 with the Model T. In 2016, Ford will stop manufacturing cars Down Under, including the Falcon and the Territory SUV. Ford Australia CEO Bob Graziano has reportedly confirmed the closure of the company's Broadmeadows assembly plant and the Geelong engine plant, both in the state of Victoria. There will be 650 jobs lost at Broadmeadows, 510 sacrificed at Geelong. Of the roughly 3,000 workers the Blue Oval has in Australia, it's said it will try to retain about 1,000 of them at its R&D and product development facilities.
The writing hasn't just been on the wall, it's been a regular item in all the papers and on Ford's bottom line for years. As recently as 2003, Ford sold nearly 75,000 Falcons, but over the next four years, annual sales dropped by something like 10,000 units, and over the last two years, it has sold less than 20,000 per year. It isn't only Ford that has suffered - sales of the other large, locally produced sedan, the Holden Commodore, have also gone over the precipice, triggering the same kind of angst about Holden's continued existence. Ford is the smallest of Australia's local automakers, Holden and Toyota the others, and has posted losses of $AUD141 million last year ($136M US) and $AUD600 million ($580M US) in the past five years. Graziano said the cost of manufacturing is simply too expensive in the country, twice as high as Europe and three times as high as Asia, and there no way to make a business case for staying in the country.
In January 2012, Ford Australia announced it would stay in the country until at least 2016, but by July of the same year, most outside observers were quietly declaring that 2016 would be the last year of Ford Down Under, and even the speculation was making other observers nervous. Ford received money from the Victorian government last year to aid its refresh of the Falcon and Territory, which will continue on schedule for the 2014 model year. A front- and all-wheel-drive sedan on a global platform is predicted to replace the Falcon, with some other SUV expected to replace the Territory. The company says it still intends to expand its lineup in the country.

Ford and Chrysler reducing summer plant shutdowns

Most domestic automaker assembly plants traditionally take a couple of weeks off during the summer. The shutdowns give each plant time for much needed repairs and maintenance, and in some cases, help better align production with demand. Not this year, though, as demand for many models is outstripping what Ford, Chrysler and General Motors plants can produce.
Ford has announced that it will shorten its annual summer shutdown for most North American plants from two weeks to one. The shorter shutdown will increase the carmaker's annual North American production by 40,000 units on top of the 200,000 extra units that it was already planning to produce this year versus last. Automotive News reports that Ford produced 2.8 million vehicles on this continent in 2012, and that output this year has already increased 13 percent through April.
Chrysler, meanwhile, is also operating at full tilt and plans to run some plants through the summer with no shutdown at all. Those not getting a break include Jefferson North where the Jeep Grand Cherokee and Dodge Durango are assembled, Toledo North that will assemble the new Cherokee, and Conner Avenue, home of SRT Viper production. Other assembly plants will be down for a single week, while all of Chrysler's engine and transmission plants except one in Indiana will continue operating with no shutdown this summer.

The big dune jump and the damage done

The Silver Lake sand dunes see their fair share of well-built trophy trucks executing impressive jumps. Drivers build insane pieces of machinery for the express purpose of sailing through the air like mad men and women.
Mike Higgins is no stranger to the area. His heavily modified Ford trophy truck has gone flying through the sky on more than one occasion, but he recently bit off more than he could chew. After hitting a particularly lofty dune, Higgins went airborne for a ridiculous 180 feet before becoming intimately familiar with the finer points of gravity.
While Higgins nailed the jump, his landing fell short of wowing the judges. The impact very nearly broke his truck in two. Despite the mechanical mayhem, the driver walked away without a scratch, proving that occasionally miracles really do happen. You can check out the jump and the subsequent destruction below for yourself. Be warned: there's a fair bit of foul language.

Hennessey completes first VelociRaptor SUV conversion [w/video]

Start with a Ford F-150 SVT Raptor as your base vehicle for modification, and chances are high that you'll end up with something pretty cool. Now, have those modifications done by professional lunatics Hennessey Performance, make the project turning the pickup into an ultra-long SUV, and the result stands a real chance of being a total kick in the ass. Let us present the Hennessey VelociRaptor then, in all of its awesomeness.
Hennessey has taken care in grafting a "Expedition style" rear cabin onto the Raptor, complete with an optional third row. The pictures we have show a cabin that's up to the fit and finish standards of the original Ford truck, too. The cab added over the bed also makes room for a massive load space out back, accessible via split out-folding doors and long enough for a person to lay down in (see video).
Mechanically, the truck-turned-SUV sticks with Ford's stock 6.2-liter V8, rated at 411 horsepower, or can be had with a supercharger and some 600 hp. Hennessey says the stock-motor VelociRaptor will run from 0-60 miles per hour in 7.5 seconds, while the hi-po version takes just 5.9 seconds. The SUV does take some of the off-road ability away from the Raptor, with the company saying it hasn't yet had the opportunity to test its capabilities. On-roading and "moderate off-road duties" are the current prescription.

Ford Fiesta ST orders off to strong start

We at Autoblog love the new little Ford Fiesta ST, and apparently, folks in Europe are pretty impressed with it, as well. According to Ford, the automaker's European arm has already logged 3,000 orders for the new hot hatch since it hit dealerships this March. The US-spec car, which will only be available as a five-door, will go on sale in the United States this summer.
What's perhaps most interesting about the Fiesta ST ordering is that the majority of customers appear to be ordering high-spec cars. According to Ford data, 60 percent of customers have opted for the leather interior with Recaro buckets, and 90 percent have selected the upgraded 17-inch wheels (seen on our test car, above). Spirit Blue has been the most popular color, commanding 27 percent of all orders. As for the technology upgrades, 19 percent of customers have ponied up for the Sony stereo with navigation.
To recap, the Fiesta ST is offered with Ford's 1.6-liter EcoBoost four-cylinder engine, putting out 179 horsepower and 177 pound-feet of torque, mated exclusively to a six-speed manual transmission. We had an absolute blast flinging the hot Fiesta through the French Alps, and we can't wait for this sharp little hatch to make its way over to the States.