1923 Ford T Bucket Touring Hot Rod Street Rod on 2040-cars

Auto blog

Did a US automaker blow the whistle on Hyundai, Kia fuel economy issue?

In all of the most hotly contested mainstream segments of the motoring universe, the difference of one mile per gallon averaged on a widow sticker can mean the difference between a sale and a walk-off - to say nothing of two or three mpg. So, when Hyundai and Kia were forced to reveal that many of their 40-mpg ratings were actually 38s and 37s, well, it made for big news.
It also, conceivably, made for a competitive disadvantage immediately, when the Korean automakers' products were being shopped versus the guys down the block. And it's that disadvantage that makes a recent story from Automotive News so juicy.
AN is reporting that Margo Oge, former head of the Environmental Protection Agency's Office of Transportation and Air Quality, got a tip in 2010 that Hyundai/Kia were "cheating" to get its impressive fuel economy numbers. The tip, said Oge (who retired from the EPA this past September), came from a senior vice president from a domestic automaker. The source was credible enough for Oge to launch an audit of the Hyundai figures, which ultimately lead to the debacle that we reported on a few months ago, and that the Korean company has been trying to bounce back from ever since.

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.

Ford exec downplays idea of aluminum-intensive cars

Ford certainly made waves when it rolled out the all-new 2015 F-150 made primarily out of aluminum. But while trimming weight off its vehicles is a top priority for the Detroit automaker, we shouldn't expect the lightweight metal to be used as widely on passenger cars as it has been on its new pickup. Speaking at the Automotive News World Congress on Wednesday, top Ford exec Joe Hinrichs said that using aluminum in passenger cars isn't as beneficial as it is in trucks – primarily because the weight savings isn't as dramatic, or as deeply needed. Though improved fuel economy is certainly one advantage of aluminum construction in a truck like the F-150, low prices at the pump have prompted Ford to highlight another advantage, and that's capability: With less weight on its own, a lighter-weight truck can carry and tow more than a heavier one, because it all comes down to combined weight ratings. Ford is expected to make the new F-Series Super Duty largely out of aluminum for the same reasons, and we wouldn't be surprised to see the next Expedition use the material as well. But while certain components in Ford passenger cars will be made of aluminum, we shouldn't expect entire chassis and bodywork assemblies to use the material as extensively as on the F-150, or on more upscale passenger cars from the likes of Audi or Jaguar. Dearborn is, however, investing in other lightweight materials. It has a joint venture with Dow Chemical to put carbon fiber into mass production, much as BMW has with its i3. The Blue Oval will use a combination of carbon and aluminum on its 2017 GT supercar, and it has stripped weight by removing amenities from the 2016 Mustang GT350R, but apparently neither is a method Ford can practically apply to its volume models. Related Video: Featured Gallery 2015 Ford F-150 View 36 Photos News Source: TheDetroitBureau.com, Automotive News - sub. req.Tip: Ford Green Ford aluminum joe hinrichs