Ford Fairlane, page #76

Ford Fairlane Price Analytics

About Ford Fairlane

Auto blog

Ring Brothers shows 1965-66 Mustang fastback carbon fiber body

We covered one of Ring Brothers' more extreme SEMA builds yesterday, the De Tomaso Pantera-based ADRNLN, but if that well-executed but over-the-top Italian-American exotic is too much for you, then perhaps this Ring Brothers 1965 Ford Mustang fastback with a carbon-fiber body suits your tastes better.
What the performance-parts manufacturer is showcasing with the Mustang is the carbon-fiber body itself, which is fashioned around the 1965-66 fastback. It can be bought from the company and bonded to the skin and unibody as a do-it-yourself project, or you can take your Mustang to Ring Brothers and have the body installed there. The fenders, doors and quarter panels are two-inches wider than stock, and Ring Brothers offers a custom widebody chassis to those who want the complete package.
The show car looks sharp in person lowered on HRE wheels, and we appreciate the bare front end so we can see the supercharged V8 and front coilover suspension, though the details on those performance upgrades are slim. Also note the custom independent rear suspension setup at the rear.

1969 Ford Talladega GPT Special is a SEMA showstopper

Rad Rides by Troy has unleashed upon the SEMA crowds this custom 1969 Ford Torino Talladega GT Special, and it's a beauty. The car calls to mind the classic Holman Moody stock cars that circled NASCAR tracks in the late 1960's, driven by the likes of Mario Andretti, Dan Gurney and David Pearson, who won the Grand National title in both 1968 and '69 in a Ford Torino.
Even though it has plenty of stock-car influence, there's nothing retro about the car's design or powertrain, other than the fact that the engine is based on a Ford Boss 429 block. Fuel injection, aftermarket aluminum heads and a high-tech custom computer system combine to send 750 reliable ponies to the rear wheels through a Tremec five-speed manual transmission. Brakes measure 14-inches all around, with six-piston Wilwood calipers up front and four-piston units out back.
There's custom bodywork abound, painted in a two-tone Tennessee Whiskey Gold and Daytona Sand finish. Check out all the amazing details in the image gallery below, and scroll down to read all about it in designer Troy Trepanier's own words.

Creations n' Chrome Top Notch Mustang is a one-of-a-kind fox

Is there a cooler car from the 1980s and early 90s to mod than a Fox-body Ford Mustang? No, there isn't. If you disagree with us, we suggest you have a look at this 1990 Mustang Coupe, which just might change your mind. Although considering just how extensively modified this car - the Top Notch Mustang from Creations n' Chrome - is, we wonder just how much Ford is left in this old pony.
It rides on a custom race tube chassis that weighs a scant 700 pounds, while carbon-fiber bits and bobs help lower the overall curb weight to a mere 2,400 pounds. When paired with supercharged, 5.0-liter, Aluminator V8 from Ford Racing, the results are, doubtlessly, exciting. 855 horsepower at the rear wheels and 667 pound-feet of torque are available from that force-fed V8 should be just plenty for this car's intended purpose of running in standing-mile competitions.
The Top Notch Mustang is more extreme than just weight savings and a big engine, though. That 5.0-liter is essentially in what's known as a front-mid layout - where the engine is actually behind the front axle. In this case, the 5.0-liter V8 is 17 inches further back than a factory Fox-body, for better weight distribution. As a result, the cabin has been completely overhauled. An SLA front suspension, wheels from HRE, Wilwood brakes and Sparco interior items round out the extensive list of mods.

Hot Wheels Ford Transit Connect is worth more if we keep it in the box

If the 2014 Transit Connect is anything like it's utile current-generation predecessor, and we suspect it is, it will undoubtedly be one of the most functional vehicles in North America. Ford has used the occasion of SEMA to turn the TC in to things that both make use of that functionality, and occasionally sort of wreck it in the name of good old-fashioned fun. The Ford Hot Wheels Transit Connect most certainly falls into that second category.
Most TC owners might cite the vehicle's massive cargo capacity as its top positive trait, though in the case of this wide-bodied Transit said space has been sapped in the name of a 55-inch television screen, a massive Hot Wheels drag strip (continuing a popular theme at SEMA this year) and custom storage for dozens of models from one's personal hot wheels collection. Designers have also plucked the grippy Recaro seats from the Focus ST, and thrown in a pair of 18-inch tablet screens for connectivity on the go.
Naturally, the Transit Connect wouldn't be an appropriate SEMA vehicle, or Hot Wheels name-bearer, if it weren't wearing an eye-popping appearance package. Additional homage to the Focus RS can be found in the blazing blue and orange front fascia and bumpers, while 20-inch wheels make sure the wider (four-inches in front and six-inches in the back) Transit Connect sits just right. The 2.5-liter four-cylinder-engine that powers the Hot Wheels TC ensures that the concept is more show than go, but you probably had that pegged from your first look, anyway.

Chip Ganassi Racing switches to the Ford EcoBoost-powered Riley Daytona Prototype

Chip Ganassi Racing with Felix Sabates (CGRFS) announced yesterday at Ford's SEMA press conference that it will field a Ford-Riley Daytona Prototype with the 3.5-liter EcoBoost V6 in the 2014 United SportsCar Championship (USCC). CGRFS is the second team to commit to the new Ford-Riley car, behind Michael Shank Racing (which has already used the racecar to break a 26-year-old top-speed record at Daytona International Speedway).
"Over the last 10 seasons we have been able to experience a great deal of success in Grand-Am," Chip Ganassi says, "and now with the dawn of the new United SportsCar Championship we feel that Ford power will be a key ingredient to writing the next chapter of our sports car program."
In the last Grand-Am season, CGRFS raced a BMW-Riley Daytona Prototype. The team has won seven Daytona Prototype championships, all in the past ten years. Scott Pruett and Memo Rojas return as the team's prototype co-drivers, and will attend their maiden race in the Ford-Riley at the Rolex 24 at Daytona in January.

Ford jumps back in the water with marinized 6.2L V8

Nameplates like the Mercury Mariner and Lincoln Navigator aside, Ford hasn't offered a marine engine in over two decades. But through a new partnership with one of the biggest names in the business, the Dearborn-based automaker is dipping its proverbial toes back in the water.
Announced yesterday at the SEMA Show in Las Vegas, the new partnership between Ford Component Sales and Indmar Marine Engines will see the 6.2-liter V8 from the F-150 SVT Raptor and F-Series Super Duty marinized for use in boats.
The largest privately owned inboard gasoline marine engine manufacturer in the world, Indmar has been in the business for 43 years, and figures the Ford V8 will be just what watersport enthusiasts are looking for to tow waterskiers and wakeboarders to their hearts' content.

Ford F-100 'Snakebit' shown off by Gene Simmons and Shannon Tweed at SEMA

Ford, along with KISS bassist Gene Simmons and his wife, Shannon Tweed, used SEMA as a backdrop to pull the covers off Snakebit, a 1956 Ford F-100 pickup truck that's been updated with Shelby Mustang-derived styling bits and a 5.4-liter supercharged V8 engine. All 550 horsepower are funneled through a six-speed manual gearbox to the rear wheels.
Underneath the custom bodywork sits a chassis that's been stretched five inches and a bed widened and bedecked with billet machined pieces that are supposed to look like wood. The 20-inch rear and 18-inch front wheels ape those of past Shelby Mustang models. The interior is swathed in two-tone leather with a bench seat designed to look - try to act surprised - like a Shelby Mustang.
Like what you see? Bidding for the truck will take place in 2014 at an unspecified Barrett-Jackson event (we'd assume Scottsdale). Proceeds will be used to help build a children's hospital in Saskatoon, in the province of Saskatchewan, where Ms. Tweed grew up. See the high-res gallery above and the press release down below for more.

Ford Fiesta ST customs get wild at SEMA

The massive 57-car SEMA showcase by Ford ranges from obvious aftermarket-friendly models like the Mustang, to the not so obvious ones, like the Transit Connect and cute-as-an-explosive-button Fiesta ST. Ford plucked several Fiesta STs for SEMA duty, and we were on the show floor today to get a closer look at some of them.
First up is the striking COBB Tuning and Tanner Foust Racing Fiesta ST (above) finished in a black-and-gray digital camouflage, much like that used in the military, and is meant to raise awareness for the Pat Tillman Foundation. COBB also fitted a three-inch exhaust and a cold-air intake. A new shift knob, carbon-fiber hood and a Kicker stereo round out the mix of upgrades.
MRT got its hands on a Fiesta ST and created a car inspired by Forza Motorsport 5 (below, left). Featuring a two-tone paint job and more performance upgrades than you can shake a stick at, this Fiesta ST is one of the cooler compacts at Ford's stand. A high-performance exhaust system, along with a complimentary COBB induction system, allows the ST to breathe better, while an H&R coil over suspension and Steeda brakes help it stop and turn better than stock.

Ford vandalizes the SEMA Show floor with 2014 Transit Connect

The Ford booth here at SEMA is practically a 1970s throwback with all these customized vans sitting front and center. And we're completely fine with that. Take the black and yellow (black and yellow, black and yellow) 2014 Transit Connect from Mobsteel above. It's got a great stance, sits on steel wheels and has a pretty cool paint job and graphics package to boot.
Of course, that's not the only van you can see at the Ford booth. In fact, there are 10 Transit Connect vans on display from Ford here at SEMA, and you can see them all in our live gallery of high-res images above. Then, if you want to know more about each specific model, feel free to scroll down to read all about these vans in the official press release from Ford.

J Mays retiring from Ford design, succeeded by Moray Callum

Ford's highly influential head of design, J Mays, has announced that he'll be retiring from his position after 33 years in the industry, 16 of which were at the Dearborn, MI-based company. Upon departure, he'll be succeeded as group vice president of design by Moray Callum. If that last name sounds familiar, yes, he's the brother of Jaguar's Ian Callum.
It's difficult to explain just how big of a role Mays had on not just Ford's design over the years, but on the entire industry. Before heading to Dearborn, Mays worked for Audi, BMW and then Volkswagen, where he was involved in concept cars that paved the way for design icons like the first-generation Audi TT and the Volkswagen New Beetle. As for his Ford resume, it's extensive.
Mays joined the company in 1997 as design director for Ford, Lincoln, Mercury and Mazda, as well as the Premier Automotive Group (Volvo, Land Rover, Jaguar and Aston Martin). He was heavily involved in the Ford Fusion, Focus, Fiesta, Taurus, F-150 and Mustang, while also contributing to concept cars like the Atlas, Evos, 427, Forty-Nine, Shelby GR-1, Lincoln MKZ and the MKC.