Ford Edge, page #92

Ford Edge Price Analytics

About Ford Edge

Auto blog

Ford F-150 bumps Camry from top of Cars.com American Made Index

With July 4th just around the corner, what better time could there be for Cars.com to announce that the Ford F-150 is the Most American car of 2013? This may be especially true since it was the Toyota Camry, a car produced by a company based in Japan, that had held the top spot from 2009 to 2012.
Cars.com compiles its Most American list by considering the amount of parts each vehicle uses that come from America, where it's final assembly takes place and how many units per year are sold. "While the assembly point and domestic parts content of the F-150 didn't change from 2012-2013, vehicle sales are responsible for bumping the F-150 to the top spot," according to Patrick Olsen, Editor-in-Chief of Cars.com.
As far as automakers go (as opposed to individual models), Toyota retains the top spot it held in 2012, with General Motors, Chrysler, Ford and Honda (in that order) rounding out the list. The motivation behind this list each year, according to Olsen, is "to help car shoppers understand that 'American-Made' extends beyond just the Detroit three" and because "a study we conducted in 2012 indicated that 25 percent of shoppers surveyed preferred to buy American."

Next Shelby Mustang to wear GT350 nameplate

Earlier this month, rumors started to swirl 'round the web about the next-generation Ford SVT Mustang - the halo version of the all-new 2015 'Stang seen testing in the gallery above. Originally, we heard that the Shelby GT500 moniker would be dumped in favor of "a name you're familiar with," which some sources guessed could mean a return of the Cobra nameplate.
That might not be correct. According to Road & Track, citing a report from Mustangs Daily, the new range-topping Mustang will bring back the Shelby GT350 name - currently used on an aftermarket version of Ford's Pony produced by Shelby American (take a look at our recent Quick Spin of that car). Expect the new GT350 to be quite a bit different than the current GT500 - it will be all motor, using a V8 that's derived from the naturally aspirated 5.0-liter Coyote engine (though it will no doubt have a higher displacement). The GT350 will be a lot more powerful than the next Mustang GT, which is expected to offer something like 450 horsepower, but won't be quite as absurd as the 662-horsepower GT500 we currently enjoy.
The Shelby GT350 will reportedly bow with the rest of the new Mustang range at the 2014 New York Auto Show, which coincides exactly with the original Mustang's debut at the New York World's Fair in 1964. If that seems far out, don't worry, we'll be seeing the rest of the 2015 Mustang range before then, but Road & Track reports that the 2014 Detroit Auto Show stage will be reserved for the reveal of the next Ford F-150 pickup.

2015 Ford Mustang spied on video for the first time

Not many cars will continue to hold our rapt attention quite like the upcoming redesigned 2015 Ford Mustang, codenamed S550 internally. Earlier this month, we brought you the first spy photos of a next-gen Mustang prototype out testing, and even though expertly placed cladding concealed the pony car's new shape, we could tell that underneath was hiding an altogether new form inspired by the Evos Concept from 2011.
Today we give you some video of what looks to be the same Mustang prototype, which you can watch below, and while the budding director behind the camera wasn't able to capture much in the way of the engine's audio signature, we can see the car in motion for the first time and compare its relative size and shape to the S197 Mustang GT that's on its tail.

BMW V8-powered Ford Model A is the definition of Hot Rod

Today, hotrodding has a pretty staid definition. Take one classic American car, add one classic American V8, sprinkle with tire smoke and you pretty much have every hot rod to roll out of a shop in the last 40 years. Mike Borroughs knows it wasn't always this way. Once upon a time, getting your bucket to go faster meant grabbing whatever parts were lazing about the yard, bolting them together with a bit of ingenuity and laughing your way down the quarter mile. It's in that spirit that Burroughs built his 1928 Ford Model A.
Rather than turn to the tired flathead or the common Chevrolet small block, Burroughs plucked a 4.0-liter V8 from a 1995 BMW 7 Series. With 300 horsepower and 300 pound-feet of torque, the engine has no trouble shuffling the old A around town. He had to build a custom chassis to get everything to cooperate, but the result is a 1,500-pound heathen that looks built to harass dry lake beds. You can check it out in the video below. Be warned, the soundtrack by Hanni el Khatib may not be safe for work - awesomeness of this caliber rarely is.

Project Ugly Horse: Part IX

One Step at a Time
Nearly every flavor of exotic driveline has been shoved into the ubiquitous Ford at some point or another.
Chuck Schwynoch had been patiently listening to my ramblings on the other end of the phone for a solid half hour. I'm not too big of a man to know when to ask for help, and at this point, I desperately needed some assistance. The truth is, working on a machine like a Fox Body Mustang is as easy as breathing thanks to the wealth of information available on the web. Nearly every flavor of exotic driveline has been shoved into the ubiquitous Ford at some point or another, and odds are the sorry souls behind those builds shared the highs and lows of their torment with the internet community.

PickupTrucks.com's latest test results in a familiar winner [w/video]

PickupTrucks.com has gone and thrown the latest batch of half-ton pickups into a cage match to see who would come out on top. The site put the 2014 Chevrolet Silverado 1500, GMC Sierra 1500, 2013 Ford F-150, Ram 1500, Toyota Tundra and Nissan Titan through a battery of tests. Those included 0-60 miles per hour acceleration, 60-0 mph deceleration, fuel economy, a hill climb, and payload and towing. They even threw the rigs on an autocross course to evaluate overall handling. Each truck was given points based on how it scored in each evaluation.
Who came out on top? Somewhat surprisingly, the 2013 Ford F-150 walked away with the gold, though fewer than 50 points separated first and fourth place. Head over to PickupTrucks.com to read the full evaluation and the final results. You may be shocked to see exactly where some of the segment's newest additions placed. You can also watch a video on the test below.

MyFord Touch getting buttons and knobs back to counter criticisms

Ford deserves credit for being a front-runner in offering advanced infotainment technology with its Sync and MyFord Touch systems, but continued consumer complaints over its confusing touchscreen interface and capacitive controls has made the automaker relent. The Wall Street Journal reports that physical buttons and knobs for controlling tuning and volume will be coming back to Ford vehicles equipped with the controversial infotainment system.
The 2013 F-150 with MyFord Touch gives us a glimpse of what the new layout with buttons and knobs might look like, as Ford says a similar balance of touch screen capability and buttons/knobs are what's being planned for future models. And, while capacitive controls have no fans in the halls of Autoblog, many of Ford's models with MyFord Touch do have a large physical knob for adjusting volume with integrated buttons for tuning and advancing tracks, though most of those are models with the optional upgraded Sony Audio system. Lincoln models with MyLincoln Touch, however, feature only capacitive controls for all stereo and climate functions.
Despite receiving enough complaints to throw buttons and knobs back into the mix (a move that reminds us of BMW's iDrive trajectory, among others), Ford reports that Sync and MyFord Touch have still been sold on 79 percent of its 2013 model year vehicles, a number it claims is double the rate that Honda and Toyota are getting for their infotainment systems. Ford also states that owners who do opt for the duo of technologies are more satisfied with overall vehicle quality than those who don't have it.

Ford using robot drivers to test durability [w/video]

In testing the durability of its upcoming fullsize Transit vans, Ford has begun using autonomous robotic technology to pilot vehicles through the punishing courses of its Michigan Proving Grounds test facility. The autonomous tech allows Ford to run more durability tests in a single day than it could with human drivers, as well as create even more challenging tests that wouldn't be safe to run with a human behind the wheel.
The technology being used was developed by Utah-based Autonomous Solutions, and isn't quite like the totally autonomous vehicles being developed by companies like Google and Audi for use out in the real world. Rather, Ford's autonomous test vehicles follow a pre-programmed course and their position is tracked via GPS and cameras that are being monitored from a central control room. Though the route is predetermined, the robotic control module operates the steering, acceleration and braking to keep the vehicle on course as it drives over broken concrete, cobblestones, metal grates, rough gravel, mud pits and oversize speed bumps.
Scroll down to watch the robotic drivers in action, though be warned that you're headed for disappointment if you expect to see a Centurion behind the wheel (nerd alert!). The setup looks more like a Mythbusters experiment than a scene from Battlestar Galactica.

Ford Fusion demand outstripping supply

The attractive new 2013 Ford Fusion has done wonders for the brand in the highly competitive midsize sedan segment - the vehicle is up nearly 22 percent compared to last year. But that sales momentum may soon hold steady due to low inventory levels of the new Fusion across the United States.
According to a report in The Detroit News, citing automotive data and Ward's Auto, Ford currently has a 39-day supply of the Fusion. That might sound fine, but a normally healthy average is about a 60-day supply. If Ford were to stop production on the Fusion today, there would only be enough vehicles available to get through another five weeks of sales, according to the News.
Currently, Ford produces the Fusion at its three-shift assembly plant in Hermosillo, Mexico, and will add production at its facility in Flat Rock, MI later this year. A Ford spokesperson told The Detroit News that when Flat Rock production comes online, the automaker will need to rush new stock out to the regions with the most demand for the Fusion. Ford has doubled its coastal retail market share, with huge amounts of growth in areas like Los Angeles, San Francisco and Miami, the News reports.

2013 Hennessey VelociRaptor 600 SUV

Raptor, Excursion, Texas And Hennessey
Each of those words are synonyms for big and bold - combine all four and you've got one of the largest, most powerful and robust street-going sport utility vehicles in the world.
John Hennessey is a Texas-based tuner known for creating some of the fastest and most capable cars on the planet. Over the past two decades, machines like the Viper Venom 550, Ford GT 1000 Twin Turbo, HPE 700 LS9 Camaro and the almighty Venom GT have emerged from the Hennessey Performance garage. And those are just the celebrated flagships; the company has modified thousands of other street cars including those from Audi, Bentley, Cadillac, Ferrari, Ford, Porsche and Toyota, to name a few.