Ford Custom Coupe, page #59

Auto blog

Ford Fiesta rally car warms up in Sweden

Rallycross is seeing a sudden surge in popularity with two series bringing the racing to the US and Europe. The Ford OMSE team is competing in both championships this season, and it saw no reason not to hold practice with a highly modified Fiesta in the snow of Northern Sweden. It brought together Andreas Bakkerud from the European-focused FIA World Rallycross Championship and Patrik Sandell from the North American-focused Global Rallycross series for some training and fun. They certainly appear to be enjoying themselves, too, with some lovely pirouettes in the powder.
If you're unfamiliar with rallycross, the discipline combines the best of rallying and circuit racing. Drivers (with no co-drivers) race rally cars over a circuit that generally mixes dirt and asphalt, and unlike traditional rallying, multiple cars compete side-by-side at once. Even better, it's often a very two-fisted form of motorsports with lots of car-to-car contact. Global Rallycross and World Rallycross will both kick off their seasons in May. With spring on the way, scroll down to watch the Fiesta kick up some of the last snow drifts of the year.

Jay Leno's Garage goes eco with Ricardo HyBoost

"Now before you turn away, this is not another boring hybrid car thing..." Despite the slightly defensive introduction from Jay, the latest episode of Jay Leno's Garage is actually pretty fascinating. The Ricardo HyBoost is a 2009 Ford Focus that has had a 1.1-liter engine swapped in for the stock 2.0-liter four. That might not get you performance enthusiasts out there fired up, until, that is, you hear that the 1.1L is also fed by both a turbocharger and an electrically driven supercharger for an instant-on "torque-fill" effect. Sounds about right, considering that Ricardo engineering is part of the genius behind the McLaren P1.
Perhaps most exciting of all, the Ricardo folks say that the package should run somewhere in the neighborhood of $1,100. A sort of performance-hybrid that makes sense for the frugal driver and the enthusiast one, then. There's a lot more to the HyBoost, all of which can be seen in the video below.

Experts wonder if aluminum F-150 gives Ford a real advantage

There's no doubt that Ford is taking a risk in producing the body of its upcoming new F-150 pickup truck in aluminum. What is up for debate, however, is whether aluminum was a wise risk to take in the first place. Wards Auto took the opportunity to poll some experts on the subject of aluminum versus steel in the automotive sector, with somewhat unsurprising results.
Richard Schultz, a project consultant at Ducker Worldwide, which bills itself as "a leading aluminum industry consultant (though they also deal in steels), suggests that the potential drawbacks to aluminum - higher costs, lower supply - aren't really impediments to the auto industry's increased acceptance of the lightweight metal.
Similarly, Randall Scheps, global automotive marketing director for Alcoa, a massive aluminum producer, counters claims that aluminum is less safe for vehicle occupants, suggesting that the use of aluminum can actually increase safety as it could potentially allow for larger vehicles with more crush space than steel.

1964 Ford GT40 prototype to be auctioned in April

The Ford GT40 owns a firm spot on the list of the greatest American racecars ever made, being the first car from the United States to take an overall win in the 24 Hours of Le Mans. And now Mecum will auction what it claims is second-oldest GT40 still in existence at its Houston sale on April 12.
The story of the GT40 is fascinating. Henry Ford II attempted to buy Ferrari in the early '60s, but Enzo refused. Ford decided if he couldn't have them, then he would beat the Prancing Horse on the track. Ford went to Carroll Shelby and asked him to spearhead the program. The early cars combined a steel monocoque chassis with Ford's 4.2-liter V8 engine pumping out around 350 horsepower. The first prototype made its public debuted on April 1, 1964, at the New York Auto Show.
Shelby kept building prototypes, including GT/104, which is for sale here. This version featured a lighter steel chassis and was raced at Le Mans in 1964. However, a fire forced it to retire. It was then repainted and had a 4.7-liter (289-cubic-inch) engine fitted. The chassis had its best finish at the 1965 Daytona Continental 2,000 Kilometers where it finished third with Bob Bondurant and Ritchie Ginther behind the wheel. Later that season, it was shipped back to Ford where it was restored and displayed at auto shows until 1971 when the automaker sold it. Since then, it has had many private owners.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.

A tribute to William Clay Ford

The passing of William Clay Ford has been a big event for the company he spent most of his life helping run. Ford spent 57 years working for his family's company. Considering the Blue Oval has been around for over 100 years, WCF's passing is the end of an era for the Dearborn-based manufacturer.
Ford's YouTube channel has issued a short memorial video highlighting the life of the longest-lived grandson of company founder Henry Ford. It follows William Clay from his time as a boy, showing him alongside his grandfather, through his younger years, and into his twilight, as the patriarch of the Ford family.
Take a look below for this touching memorial video on William Clay Ford.

William Clay Ford Sr. dead at 88

William Clay Ford, retired vice chairman of Ford Motor Company and the last surviving grandchild of company founder Henry Ford, died this morning after a bout with pneumonia. He was 88.
Ford spent 57 years with his grandfather's company, joining the board of directors in 1948 before graduating from college. Ford also held a position as chairman of the design committee, as well as the chairman of the executive committee and vice chairman of the Board of Directors during his tenure with the company. In a 2013 Detroit Free Press story, retired CFO Allan Gilmour said Ford had an eye for design, and was once able to pick out when a fiberglass model of a Ford Contour was asymmetrical, off by an inch on one side. He retired and assumed the position of director emeritus in 2005.
"My father was a great business leader and humanitarian who dedicated his life to the company and the community," said Bill Ford, Jr., Ford's current executive chairman. "He also was a wonderful family man, a loving husband, father, grandfather and great-grandfather. He will be greatly missed by everyone who knew him, yet he will continue to inspire us all."

Truckmakers squabbling over who can sell Jimmy Fallon a pickup

Snagging a celebrity endorsement is a big deal for automakers, as evidenced by the recent efforts of the Detroit Three to try and woo The Tonight Show's newest host, Jimmy Fallon, into one of their trucks.
After announcing during Wednesday night's show that he was in the market for a pickup truck, Fallon set off a firestorm of efforts on Twitter, with both Ford and Chevrolet petitioning the funnyman to test out a truck. According to Ad Age, Ford recommended the King Ranch edition of its next-generation F-150 while the show was still airing. Chevy, meanwhile, waited until the next morning to pitch a Silverado to Fallon.
The winner of this social media feeding frenzy, though, was Ram. Promoting a variation of its "Guts, Glory, Ram" tagline, the Auburn Hills-based manufacturer created the hashtag #GUTSGLORYFallon. It even went so far as to park a Ram 1500 outside 30 Rockefeller Center in New York, where The Tonight Show is filmed. On the back of the Ram sat a sign, reading "Big enough, Jimmy? Test it out," referencing a joke from the Wednesday show.

Focus ST diesel variant coming, just don't look for it here

A few years back, Volkswagen made some waves when it announced the Golf GTD - a diesel-powered car that, aside from its ultra-efficient, ultra-torquey engine, was identical to the gas-powered GTI. That meant cosseting sport seats, larger wheels, sportier suspension, larger brakes and a body kit that made the GTD indistinguishable from the GTI, except for the three little letters on the back and in the grille.
Now, Ford is looking to replicate VW's success, with a diesel version of the Focus ST. According to Motor Trend, the diesel-powered ST will use a 2.0-liter, 182-horsepower four-cylinder. With an unspecified amount of torque on offer (we'd guess around 280 pound-feet), the diesel hot hatch should hit 62 miles per hour in about eight seconds.
The report, which originally comes from Auto Express, claims the ST Diesel was confirmed by Ford Chief Marketing Officer Mark Fields during this week's Geneva Motor Show. Not surprisingly, it doesn't appear there are any plans to bring a diesel-powered Focus of any kind to the US, let alone one that uses the suspension, steering and other items from the ST. Of course, if there's an official confirmation from Ford, we'll be sure to report on it.

2015 Ford F-Series Super Duty is class-leading once again

Time for everyone to feign surprise - Ford has just announced that it has the increased horsepower and torque levels of its 6.7-liter Power Stroke turbodiesel V8 engine for 2015. As you'd expect, the Blue Oval is claiming class-leading figures of 440 hp (up from 400) and 860 pound-feet (up from 800), and that's enough to enable Ford's F-450 Super Duty model to tow as much as 31,200 pounds, which, again, the automaker claims is class leading.
Now, it should be noted that the max rating quoted above is achieved with the Ford F-450. The 2015 F-350, which is perhaps a better comparison to the Ram 3500 HD pickup that claimed the towing crown in 2013 at an even 30,000 pounds, is capped at 26,500 pounds, either with a gooseneck or when towing a fifth-wheel trailer. In any case, it's going to take a load the size of Godzilla to make any of the current crop of fullsize heavy-duty pickup trucks break into a sweat. For those keeping track, Chevy rates its 2015 Silverado HD at a maximum of 23,200 pounds.
Ford's newfound pulling power comes courtesy of a larger turbocharger for its in-house Power Stroke engine, new fuel injector tips and, we'd assume, retuned computer controls. Besides the engine enhancements, the F-350 gets a wider front track for 2015 and new front springs, while the F-450 gains commercial-grade 19.5-inch wheels and tires, new rear U-joints, leaf springs, stabilizer bars and shocks. The steering and brake systems have also been upgraded.