Ford Contour Price Analytics
About Ford Contour
Auto blog
Ford recalling 390,000 cars over door latch woes
Fri, Apr 24 2015Ford is recalling certain Fiesta, Fusion and Lincoln MKZ vehicles due to faulty door latches, marking the latest in what seems to be a recurring issue for the Blue Oval. This is the third door latch recall from Ford in 2015, following a 213,000-unit recall in March and a 205,000-unit recall in January. This one, however, is significantly larger. A total of 390,000 units are affected, including Fusions and MKZs from model years 2013 and 2014, as well as Fiestas from model years 2012 to 2014. A "broken pawl spring tab" is the culprit, potentially keeping doors from latching shut. According to Ford, even if the door does shut, it could come open again without warning. The affected Fiestas were built between February 1, 2012 and May 31, 2013 at the Cuautitlan, Mexico factory. The Fusion and MKZ siblings, meanwhile, were screwed together at Hermosillo Assembly in Mexico between July 1, 2012 to May 31, 2013. Ford is aware of three minor reports of door malfunctions. In two cases, the door bounced back open, quite literally hitting drivers on their way out. In the third case, a door swung open of its own accord while a driver was attempting to park, hitting another vehicle. Ford will notify owners, who will need to report into dealers to have all four latches replaced. Scroll down for the official press release. Related Video: APR 24, 2015 | DEARBORN, MICH. FORD MOTOR COMPANY ISSUES SAFETY RECALL IN NORTH AMERICA FOR DOOR LATCH ISSUE ON FORD FIESTA AND FUSION, LINCOLN MKZ Ford Motor Company is issuing a safety recall for approximately 390,000 2012-2014 Ford Fiesta and 2013-2014 Ford Fusion and Lincoln MKZ vehicles for a door latch issue. The door latch in these vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck an adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2012-2014 Ford Fiesta vehicles built at Cuautitlan Assembly Plant, Feb.
Weekly Recap: Ford GT inspires guitar, foosball table, sailboat
Sat, Apr 18 2015Ford design vice president Moray Callum had just wrapped up a briefing on the interior of the Ford GT last month, but something seemed out of place. He grinned and pointed behind him, "You might be wondering why I have a boat behind me," he said mischievously. It was there because Ford set its designers on a mission to stretch and showcase their talents: design non-automotive objects inspired by the interior of the GT supercar. Callum received quite a response, too. His team produced a guitar, a foosball table (yeah bro!), a racing sailboat, a Wi-Fi speaker and some furniture. As the veteran design chief explained, "It's a really great exercise both to highlight our designers' talents, but also to really see how our design philosophy can work and how you can use it and get a common response back from a worldwide design team." Guitar View 25 Photos The objects have been on display this week at the Salone del Mobile furniture and fashion design fair in Milan, Italy, where Ford has had a presence for three years. There's also a light exhibition that apparently was inspired by the GT, as well. While this might seem a little far-fetched for the automaker, Ford said exhibitions like the Salone del Mobile give its designers another way to be creative and ultimately produce striking interior style. Ford wants this to be a differentiator, as research shows consumers are placing emphasis on the layout and features inside when they're making a decision about buying a new car. It's a little light hearted – but it's also potentially big business. Other News & Notes Cadillac CT6 platform could be used for Buick General Motors product chief Mark Reuss said the Cadillac CT6 platform could be used for a large Buick, though "not yet," Automotive News reported. The underpinnings can accommodate rear-wheel or all-wheel drive and would give Buick the large flagship it lacks. The report jibes with comments Reuss made at a roundtable with Autoblog and other reporters at the New York Auto Show. When asked if Buick had space for a large car on the CT6 chassis, he replied, "Yeah, I think it does. Yeah, I think we do." Buick has revamped its lineup in recent years with attractive crossovers and small and midsize sedans, but hasn't added the proverbial flagship that's yearned for by enthusiasts. Buick surprised industry observers with the stylish Avenir concept at the Detroit Auto Show earlier this year that raised the possibility of a halo sedan.
Wards names its 2015 10 Best Interiors list
Fri, Apr 17 2015Wards Automotive has named the winners of its 10 Best Interior awards, covering a wide but affordable array of vehicles. Where last year's list contained two six-figure vehicles, including the $372,800 Rolls-Royce Wraith, this year's is, well, a whole lot more reasonable. The publication lists the Mercedes-Benz C400 at $65,000 (which seems off), making it the most expensive vehicle here. That said, we'd argue that the entire C-Class line deserves to make this year's list, owing to its varied and high-quality selection of materials. The other vehicle to break the $60,000 mark, meanwhile, is the $60,675 Ford F-150 King Ranch, which has 327,000 pounds of leather lining its interior. Only one other German car, the BMW i3, and one other pickup truck, the GMC Canyon, managed to make this year's list. Here's the full list of this year's winners: 2014 BMW i3 ($52,550) 2015 Chrysler 300C Platinum ($51,175) 2015 Ford F-150 King Ranch ($60,675) 2015 GMC Canyon SLT ($40,465) 2015 Honda Fit EX-L ($21,590) 2015 Jeep Renegade Limited ($33,205) 2015 Kia Sedona SXL ($43,295) 2016 Mazda6 Grand Touring ($33,395) 2015 Mercedes C400 ($65,000) 2015 Nissan Murano SL ($41,905) See what we mean about the mainstream vehicles? Not only is there a distinct lack of luxury brands, it's the price of some of the vehicles that surprise. The Honda Fit, Jeep Renegade and Mazda6 are very reasonably priced, especially when you compare Wards price with the starting price. The Renegade Limited starts at less than $25,000, the Mazda at less than $22K and the Fit at under $16,000. Head over to Wards for a more detailed explanation of why each vehicle won. Featured Gallery 2015 Ward's Automotive 10 Best Interiors View 10 Photos News Source: Wards Automotive BMW Chrysler Ford GMC Honda Jeep Kia Mazda Mercedes-Benz Nissan Truck Crossover Hatchback Sedan nissan murano gmc canyon Interior jeep renegade WardsAuto kia sedona wards 10 best interiors mercedes c400
The List #0178: Attend Rally School
Tue, Apr 7 2015Jessi and Patrick attend Team O'Neil Rally School in Dalton, NH, to learn how to shred in the snow. Veteran instructor and school founder Tim O'Neil demonstrates left-foot braking, slalom techniques, turning, proper ways to blip the throttle and more in this episode. They get behind the wheel of modern Ford Fiestas with front-wheel drive and a vintage Audi Quattro with all-wheel drive. They catch on quickly, and O'Neil tells Patrick: "Tell your grandchildren you are a rally driver." Watch as our hosts check "attend rally school" off their list. Have an RSS feed? Click here to add The List. Click here to subscribe to The List in iTunes. Click here to learn more about our hosts, Jessi and Patrick. Audi Ford Subaru The List Videos rally quattro
NHTSA investigating Ford's solution to May 2014 power steering recall
Tue, Apr 7 2015The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.
NHTSA investigating 500k Ford and Mercury cars for lighting failures
Mon, Apr 6 2015The Ford Crown Victoria and Mercury Grand Marquis might be long gone as new models in showrooms, but the National Highway Traffic Safety Administration might check them out yet again for a potential problem. At the urging of North Carolina Consumers Council, the agency may open another investigation into the front lighting control module on vehicles from the 2003-2005 model years, and NHTSA estimates the issue could affect 517,945 vehicles. If the module stops working, it can cause a complete failure of all forward lighting, including the headlights. NHTSA previously investigated the issue in 2008 and 2009 but found no need for a recall, according to Bloomberg. Ford also extended the warranty on the part to 15 years or 250,000 miles. To prompt this new request, the North Carolina Consumers Council received a letter from a woman experiencing the module's failure. Upon further investigation, the council found 604 complaints of this problem on NHTSA's website, including seven crashes. Furthermore, the group has alleged that dealers told customers that the parts to perform the replacement weren't available, despite the extended warranty. According to the government agency, "A defect petition has been opened to evaluate the issue and make a grant or deny decision." Ford spokesperson Kelli Felker tells Autoblog via email, "We will cooperate with NHTSA, as we always do." You can read the council's complete letter to the Feds in PDF format, here. INVESTIGATION Subject : Loss of headlamp/exterior lighting Date Investigation Opened: APR 01, 2015 Date Investigation Closed: Open NHTSA Action Number: DP15002 Component(s): EXTERIOR LIGHTING All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD CROWN VICTORIA 2003-2005 MERCURY GRAND MARQUIS 2003-2005 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has received a petition from the North Carolina Consumers Council, Inc. requesting a defect investigation of an alleged defect condition resulting in headlight and/or exterior lighting failure on 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles. The petition letter is attached for review. The petitioner alleges a defect in the lighting control module that powers the headlights which can result in the loss of vehicle headlights and/or all exterior lighting while driving. ODI has previously investigated this issue under PE08-066 which was closed without a defect finding.
Bosch fined $57.8 million by DOJ for price fixing and bid rigging
Tue, Mar 31 2015The US Department of Justice has been investigating bid rigging and price fixing among automotive parts suppliers for years, and so far the agency has leveled nearly $2.5 billion in fines against 34 companies. The latest business to be caught in this ongoing crackdown is Germany's Robert Bosch GmbH (Bosch), the world's largest independent auto component maker, and it agrees to pay a $57.8 million criminal fine to the Feds. According to the DOJ, Bosch has agreed to plead guilty to pricing fixing and bid rigging for spark plugs and oxygen sensors supplied to the former DaimlerChrysler, Ford and General Motors. The rigging is said to have occurred between January 2000 and July 2011. Bosch also allegedly played foul with starter motors sold to Volkswagen from January 2009 until at least June 2010. Bosch and other companies allegedly conspired on the pricing for bids to submit to automakers, and sold the parts at noncompetitive prices. The DOJ filed a one-count felony charge in US District Court for these actions. The company's plea is still subject to court approval, though. Bosch is only the third European company to be charged in this investigation, according to the DOJ. So far, many of the fined businesses have been from Japan, including Takata, NGK and others. Some execs have claimed price-fixing has been the standard operating procedure in the auto parts industry for a long time. Robert Bosch GmbH Agrees to Plead Guilty to Price Fixing and Bid Rigging on Automobile Parts Installed in U.S. Cars Robert Bosch GmbH, the world's largest independent parts supplier to the automotive industry, based in Gerlingen, Germany, has agreed to plead guilty and to pay a $57.8 million criminal fine for its role in a conspiracy to fix prices and rig bids for spark plugs, oxygen sensors and starter motors sold to automobile and internal combustion engine manufacturers in the United States and elsewhere, the Department of Justice announced today. According to the one-count felony charge filed today in the U.S. District Court of the Eastern District of Michigan, Bosch conspired to allocate the supply of, rig bids for, and to fix, stabilize and maintain the prices of, spark plugs and oxygen sensors sold to automobile and internal combustion engine manufacturers such as DaimlerChrysler AG, Ford Motor Company, General Motors Company and Andreas Stihl AG & Co., among others, in the United States and elsewhere.
Foreign automakers pay from $38 to $65 per hour to non-union workers
Sun, Mar 29 2015As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs
Detroit 3 and UAW set for showdown over tiered wages
Mon, Mar 23 2015This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.
Bring back the Bronco! Trademarks we hope are actually (someday) future car names
Tue, Mar 17 2015Trademark filings are the tea leaves of the auto industry. Read them carefully – and interpret them correctly – and you might be previewing an automaker's future product plans. Yes, they're routinely filed to maintain the rights to an iconic name. And sometimes they're only for toys and clothing. But not always. Sometimes, the truth is right in front of us. The trademark is required because a company actually wants to use the name on a new car. With that in mind, here's a list of intriguing trademark filings we want to see go from paperwork to production reality. Trademark: Bronco Company: Ford Previous Use: The Bronco was a long-running SUV that lived from 1966-1996. It's one of America's original SUVs and was responsible for the increased popularity of the segment. Still, it's best known as O.J. Simpson's would-be getaway car. We think: The Bronco was an icon. Everyone seems to want a Wrangler-fighter – Ford used to have a good one. Enough time has passed that the O.J. police chase isn't the immediate image conjured by the Bronco anymore. Even if we're doing a wish list in no particular order, the Bronco still finds its way to the top. For now (unfortunately), it's just federal paperwork. Rumors on this one can get especially heated. The official word from a Ford spokesman is: "Companies renew trademark filings to maintain ownership and control of the mark, even if it is not currently used. Ford values the iconic Bronco name and history." Trademarks: Aviator, AV8R Company: Ford Previous Use: The Aviator was one of the shortest-run Lincolns ever, lasting for the 2003-2005 model years. It never found the sales success of the Ford Explorer, with which it shared a platform. We Think: The Aviator name no longer fits with Lincoln's naming nomenclature. Too bad, it's better than any other name Lincoln currently uses, save for its former big brother, the Navigator. Perhaps we're barking up the wrong tree, though. Ford has made several customized, aviation themed-Mustangs in the past, including one called the Mustang AV8R in 2008, which had cues from the US Air Force's F-22 Raptor fighter jet. It sold for $500,000 at auction, and the glass roof – which is reminiscent of a fighter jet cockpit – helped Ford popularize the feature. Trademark: EcoBeast Company: Ford Previous Use: None by major carmakers.