Fiat Spyder, page #12

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

FCA recalls 894k total vehicles worldwide in two campaigns

FCA is recalling a total of 893,698 vehicles worldwide in two campaigns to fix problems with inadvertent airbag deployment, failure of the anti-lock brakes, and stability control systems in the Jeep Grand Cherokee, Liberty, Dodge Journey, and Fiat Freemont. 559,703 of these vehicles are in the US. The larger recall affects 284,089 examples of the 2003 Jeep Liberty and 2004 Jeep Grand Cherokee, and there are also 13,411 of them in Canada, 6,277 in Mexico, and 48,212 outside the NAFTA region. Because of "electrical noise beyond the tolerance of the airbag electronic control module", part of that component can fail, according to the National Highway Traffic Safety Administration. This can cause the front and side airbags to deploy and the seatbelt pre-tensioners to activate inadvertently. FCA US has seven reports of alleged injuries from this problem. To fix the situation, the Jeeps need their Occupant Restraint Control modules replaced, as well as the front- and side-impact sensors. According to the NHTSA, the replacement parts won't be available until early 2016. Still, FCA US will advise owners about the problem in a letter by the end of December and will send a second notification when the components are ready. The second campaign affects 275,614 examples of the 2012-2015 Dodge Journey in the US; plus 78,148 of them in Canada, 36,471 in Mexico, and 151,476 left-hand drive units outside of NAFTA where it's sold as the Fiat Freemont. On these vehicles, water intrusion can disable the anti-lock brakes and electronic stability control, although a warning light often illuminates when this issue occurs, and the problem doesn't affect regular braking. There are also no reports of injuries or accidents. To fix the issue, dealers will seal the ABS wiring harness and will replace any already affected components as necessary, like the ABS module or the headlamp and dashboard wiring harness. Statement: Occupant Restraint Control Modules October 30, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 284,089 older-model SUVs in the U.S. to replace their Occupant Restraint Control (ORC) modules and front and/or side-impact sensors, as required. Within this vehicle population, FCA US became aware of seven injuries caused by inadvertent air-bag deployments and advised NHTSA accordingly. The affected vehicles are not equipped with Takata Corp. air-bags. The Company is unaware of any related accidents.

Mopar teases four of 'nearly 20' SEMA Show concepts

Yesterday it was Chevrolet. Today, Mopar has dropped some SEMA knowledge, releasing a quartet of teaser images that give us some indication of what kind of cars, trucks, and crossovers Fiat, Chrysler, Dodge, Jeep, and Ram will be showing in Las Vegas. Like Chevy, Mopar's concepts utilize both production and concept accessories, although Fiat Chrysler has gone a bit more indepth on at least one of its concepts. Immediately, the most tantalizing teaser is the one shown above. Yes, that's the back of a Challenger, and aside from the bright orange accents on the gray body, you should take notice of the badge mounted on the spoiler – yes, that says "GT AWD." To be honest, such a vehicle wouldn't be a huge shock, as both the Challenger's LX platform-mates, the Dodge Charger and Chrysler 300, are offered with all-wheel-drive options. Still, adding such a vehicle to the production cycle would give Dodge a leg up on the rear-drive only Ford Mustang and Chevrolet Camaro. Aside from that concept, FCA has also released teasers of a Ram-based concept, a 300-based concept, and what we're guessing is a Fiat 500X. We can't wait to see what the actual Fiat concept has to do with kiteboarding. As for the 300 and Ram, there's not a lot of hints on what sort of styling details they'll contain. The Chrysler has additional LED accents and what we're guessing is matte blue paint, while the Ram is based on a Hemi-powered 1500 with Rebel styling cues. This is just a very tiny sample of Mopar's final SEMA roster, which include "hundreds" of parts. There should also be a total of 20 vehicles covering all four former Chrysler Group brands, as well as Fiat. Naturally, we'll have plenty to report on each vehicle once the SEMA show kicks off in the next couple weeks.

UAW ratifies FCA contract

The second time was apparently the charm for the proposed contract between the United Auto Workers and FCA US as 77 percent of union members have ratified the four-year deal, it was announced Thursday. "This agreement represents an investment in our US workforce and recognizes its contributions to the company's growth over the past six years." the automaker said in a statement. Now, the UAW must move forward on new arrangements with Ford and General Motors. After members rejected the original offer, UAW president Dennis Williams (pictured above, right) was positive about the new deal's acceptance. "The resolve of our membership and the dedication of our negotiating team has produced an agreement that affords UAW members a strong wage package and job security while still allowing the company to competitively produce high quality vehicles for our customers," he said in a statement. In contrast to the last offer, the new contract largely eliminates the two-tier wage system, and it's now it's possible to attain the same $29 per hour pay over eight years of employment. According to the Detroit Free Press, the deal also no longer limits FCA US from hiring entry-level workers. The original plan for a healthcare co-op across the Detroit automakers is also axed from the latest arrangement. While the strategy was supposed to lower costs, the potential changes weren't explained well to union members, and they rejected it. UAW FCA MEMBERS RATIFY NEW CONTRACT Featured / Negotiations / October 22, 2015 DETROIT – The members have voted to ratify a new four-year collective bargaining agreement with FCA by a 77% majority. The results of the voting are as follows: • Production workers – 77% • Skilled Trades – 72% • Salaried Bargaining Unit – 87% President Williams stated, "The recent bargaining process that took place on behalf of our members at FCA is a testament to the UAW's democratic values and commitment to our members. The resolve of our membership and the dedication of our negotiating team has produced an agreement that affords UAW members a strong wage package and job security while still allowing the company to competitively produce high quality vehicles for our customers." "UAW members at FCA have obtained a strong agreement that provides substantial wage gains, fairness in the workplace, and job security.

Ferrari families have 'agreement' to prevent takeover

With its initial public offering already a massive success, Ferrari is now officially a publicly traded company on the New York Stock Exchange. While anyone can buy those shares, don't expect investors to take control away from some of the top owners of the Prancing Horse anytime soon. To maintain their power, Enzo Ferrari's son, Piero, and Exor chairman John Elkann will sign a deal guaranteeing themselves nearly half of the automaker's voting rights, Bloomberg reports. As part of this arrangement, shareholders that agree to hang onto Ferrari stock for at least three years would receive additional voting rights in the company, and that would give Piero and Elkann a combined 48.7 percent of the automaker by banding together. While not quite complete control, the move should be enough to prevent a takeover of the business. "We have an agreement among the families to protect our interests in Ferrari," Piero said to Bloomberg. This agreement won't really become a concern until next year because only 10 percent of Ferrari will be traded for now. FCA will distribute another 80 percent to its shareholders in early 2016, and Elkann's Exor will be getting the largest portion of the Prancing Horse in the spin-off. Meanwhile, Piero holds the remaining 10 percent but has absolutely no intention to sell his stake in his father's business. The newly public Ferrari will push to grow volume with a goal of moving 9,000 vehicles annually by 2019. To reach that 30-percent boost, expect to see a new model every year, and some of them might use a new, modular platform that's reportedly under development. Related Video:

Ferrari raises $893M, valued at $12B

Ferrari's stock is moving as quickly on the New York Stock Exchange as the brand's iconic sports cars do on the road. The company's incredibly popular initial public offering has already raised $893.1 million by virtue of 17.18 million shares sold for $52 apiece. If the deal's underwriters buy in as well, the figure would grow to $982.4 million. Plus, even after shouldering some of FCA's debt, the automaker carries an enterprise value of $12 billion, Bloomberg reports. Just as the company starts trading on the New York Stock Exchange, the share price is already racing upward, too. As of this writing, Ferrari stock, which is listed under the symbol RACE, is priced at $57.59. At its high so far today, the value reached as high as $60.95. While Ferrari is looking strong, the big winner in this success looks to be FCA because the company should raise $4 billion in the spin-off, according to Bloomberg. With nine percent of the sports car maker on the NYSE and one percent for the underwriters, another 80 percent will be distributed to FCA investors in 2016. When that's through, Exor, the holding company for the Agnelli/Elkann family, should have the largest stake at about 30 percent. Piero Ferrari holds the remaining 10 percent and has no intention to sell it. Related Video: FCA Announces Pricing of Initial Public Offering of Ferrari N.V. Common Shares Fiat Chrysler Automobiles N.V. (NYSE: FCAU/MI: FCA) ("FCA") and its subsidiary Ferrari N.V. ("Ferrari") announce today the pricing of Ferrari's initial public offering of 17,175,000 common shares at an offering price of $52 per share for a total offering size of $893.1 million ($982.4 million if the underwriters exercise the option described below in full). The shares are expected to begin trading on the New York Stock Exchange on Wednesday, October 21, 2015, under the symbol "RACE", and closing of the offering is expected to occur on October 26, 2015. In addition, the underwriters have a 30-day option to purchase an aggregate of up to 1,717,150 common shares of Ferrari from FCA. The offering is intended to be part of a series of transactions to separate Ferrari from FCA. Following completion of this offering, FCA expects to distribute its remaining ownership interest in Ferrari to FCA shareholders at the beginning of 2016. UBS Investment Bank is acting as Global Coordinator for the offering.

Ferrari stock demand exceeding supply

As with the Ferrari cars, so it is with shares in the company's initial public offering: When Ferrari has a limited quantity of something to sell, demand far outstrips supply. Investors told banks weeks ago that bids for the $1 billion in stock – up to 18.89 million shares – would exceed the number of shares available over the entire expected range of $48 to $52. Ten percent of the company is going on the block' Bloomberg reports that the books close on the IPO on Monday at 4:00 pm. The final price will be set on Tuesday, and trading will begin Wednesday under the ticker symbol RACE on the New York Stock Exchange. Piero Ferrari, the son of Enzo Ferrari, will hold onto the ten-percent stake he currently has in the company. Fiat Chrysler will disburse the final 80 percent to its investors sometime in 2016. In combination with spinning Ferrari off from its parent company next year, the share sale is expected to put $4 billion into Fiat Chrysler coffers, which will be used to help fuel the growth of Alfa Romeo, Jeep, and Maserati. Assuming all goes to plan, Bloomberg says Ferrari will be valued at roughly $12 billion, a number $1 billion greater than the valuation Fiat Chrysler CEO Sergio Marchionne put on Ferrari earlier this year and higher than the brand's own internal assessment. Related Video:

Fiat brand chief reassigned then resigns amid flagging sales

Jason Stoicevich was replaced as head of the Fiat brand in North America just the other day. He was immediately reassigned to another job within Fiat Chrysler Automobiles. But according to Automotive News, Stoicevich quit the new job – and the company altogether – the very next day. The development comes amidst flagging sales for the Fiat brand in America. The introduction of the awkward-looking 500L multi-purpose vehicle has been largely regarded as a sales disaster in the US. Despite having just introduced the new 500X into the growing crossover market, and an overall upward trend across FCA group sales, the Fiat brand's figures have been dropping all year. While the Italian brand's volume has fluctuated from month to month compared to last year's sales, the number of cars its dealers sells on an average day has been firmly in decline. Fiat's downward trend reflects a general tendency in the market towards larger vehicles at the expense of smaller ones. However, the powers that be in Auburn Hills evidently felt that a change of leadership was in order, so it placed Dodge chief Tim Kuniskis in charge of all the company's mass-market passenger-car brands – namely Dodge, Chrysler, and Fiat – and moved Stoicevich to running the group's fleet and small-business operations. Stoicevich remained in charge of the company's California Business Center, but it seems as though he was as dissatisfied with the switch as his superiors were with the performance of the brand over which he presided, and so he apparently elected to step down and leave the company.

UAW reveals more details for tentative FCA deal

Around 40,000 union workers employed by Fiat Chrysler Automobiles have a new proposed contract to vote for or against just about a week after soundly rejecting a previous proposal. Like the contract that was rejected, this new proposal was negotiated between union leadership and management at FCA. If workers vote this time to accept the contract, negotiations are likely to begin in earnest with the other two big American automakers, Ford and General Motors. The biggest sticking points that kept the previous contract proposal from being ratified revolved around so-called second-tier UAW workers. Under the rejected contract, there wasn't a clear path in place that would bring these newer hires into wage parity with first-tier workers. The newly proposed contract, however, would have second-tier employees earning around $29 per hour – the same as first-tier workers – after eight years of employment. A slightly revised profit-sharing plan is also included, as is a larger signing bonus for first-tier workers. Gone from the new contract proposal is a health-care cooperative that would combine workers from all three Detroit-based automakers into one pool. While this action had the potential to lower health-care costs for UAW members, it wasn't universally understood by rank-and-file workers, said UAW President Dennis Williams. "I was a little naive," he said. "I really thought everyone understood it. It is my fault. I should have educated people more on it. And so we did take it out of the agreement." If ratified, this new contract will go into effect immediately and will cover a four-year period. Over that course of time, the UAW expects FCA to increase its employment figures by a little more than 100 workers, according to reports. Additional details on the contract can be seen on the UAW's website here. News Source: The Detroit News, The Detroit Free Press, United Auto Workers (PDF)Image Credit: Jeff Kowalsky/Bloomberg via Getty Earnings/Financials Hirings/Firings/Layoffs UAW/Unions Chrysler Fiat FCA

Autoblog Minute: UAW and FCA avoid strike, Clarkson teases new show

FCA avoids a worker strike, a former Top Gear host teases us with a picture from Amazon's new car show, and Toyota predicts autonomous cars by 2020. Autoblog senior editor Greg Migliore reports on this edition of Autoblog Minute Weekly Recap. Show full video transcript text [00:00:00] FCA avoids a worker strike, a former Top Gear host teases us with a picture from Amazon's new car show, and Toyota predicts autonomous cars by 2020. I'm senior editor Greg Migliore and this is your Autoblog Minute Weekly Recap. A UAW strike of FCA was avoided thanks to a zero-hour tentative agreement reached this week. Worker concerns that were renegotiated in the new [00:00:30] deal include adjustments to the two-tier wage scale, health care costs, and production outsourcing. Now check-in with Autoblog as we update our reports on this evolving story. Shooting began on Amazon Prime's new automotive show starring the former Top Gear crew. That's Jeremy Clarkson, Richard Hammond, and James May. Now Clarkson threw out a tweet from day one of filming on location at Algarve Motor Park in Portugal. The picture features the show's [00:01:00] three stars and crew posing with the holy trinity of hyper cars. That's a McLaren P1, a Ferrari LaFerrari, and a Porsche 918 Spyder. This Prime show is being called Gear Knobs though the name is unofficial. Now if a tweet is any indication of what we can expect, who cares what it's called this is gonna be awesome. (Eds Note: Clarkson tweeted Friday that the show will not be called Gear Knobs.) Toyota predicts drivers could be obsolete on highways as early as 2020, with technology dubbed the Toyota Highway Teammate or THT. Toyota is using a modified [00:01:30] Lexus GS to show what this is capable of. THT is already able to create a driverless freeway car that's capable of changing lanes, making passes and taking curves. Plus, it can keep safe distances from other vehicles. Toyota is currently testing this on Tokyo's Shuto Expressway. Those are the highlights from the week that was. Be sure to check out my full recap this Saturday. And I'll have some added insight on the BMW M4 GTS. For Autoblog, I'm Greg Migliore. [00:02:00] Show Logo Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals.