Fiat Spider 2000, page #10

Auto blog

FCA earnings improve in first quarter

Following on the recent global financial releases from Ford and from General Motors for the first quarter of 2015, FCA is now putting out its own numbers, and things look quite good for the company. The automaker posted adjusted earnings before taxes and interest of $895 million, a 22-percent jump from Q1 2014, and net profits of $103 million, a $296-million boost from last year. Revenue was also up 19 percent to $30 billion. Despite the favorable figures, actual worldwide shipments fell slightly by 2 percent to 1.1 million vehicles. FCA is giving some credit for these strong Q1 results to the automaker's performance in the NAFTA region. Shipments grew 8 percent to 633,000 vehicles, and net revenue jumped a strong 38 percent to $18.1 billion. Adjusted earnings reached $672 million, compared to $425 million in 2014. The company especially praised the Jeep Renegade, Chrysler 200, and Ram 1500 for helping the bottom line. The numbers could have been even higher, but the corporation admitted that "higher warranty and recall costs" partially drug things down. For the full year in 2015, FCA expects to ship between 4.8 and 5 million vehicles worldwide and post up to $5 billion in adjusted earnings. There should be about $1.3 billion in net profit, as well. FCA CLOSED Q1 WITH NET REVENUES OF ˆ26.4 BILLION, UP 19% AND ADJUSTED EBIT AT ˆ800 MILLION, UP 22% 30/04/15 FCA closed Q1 with net revenues of ˆ26.4 billion, up 19% and adjusted EBIT at ˆ800 million, up 22%. Net industrial debt was ˆ8.6 billion, up ˆ0.9 billion. Full year guidance confirmed. Worldwide shipments were 1.1 million units, 2% lower than Q1 2014, reflecting strong performance in NAFTA and weak market conditions in LATAM. Jeep's positive performance continued with worldwide shipments up 11% and sales up 22%. Net revenues were up 19% to ˆ26.4 billion (+4% at constant exchange rates, or CER). Adjusted EBIT was ˆ800 million, up ˆ145 million from Q1 2014, with all segments except LATAM posting positive results. The positive impact of foreign exchange translation was offset by negative impacts at a transactional level. Net profit was ˆ92 million, up ˆ265 million compared to the net loss of ˆ173 million in Q1 2014. Net industrial debt was ˆ8.6 billion, up ˆ0.9 billion from year-end mainly due to timing of capital expenditures and working capital seasonality. Liquidity remained strong at ˆ25.2 billion. The Group confirms its full-year guidance.

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.

Ram boss says not to expect midsize pickup in America

Remember that mysterious midsize four-door pickup FCA was spotted testing recently? It may be sold as a Fiat in markets overseas, but don't expect it to join the Ram lineup in North America. At least not according to the latest word from the truck brand's new boss. Speaking with Automotive News at the New York Auto Show, Ram CEO Bob Hegbloom outlined four criteria for a successful midsize pickup, particularly in the North American marketplace: they have less capability than a fullsize truck, but return with a more compact form, lower price and considerably higher fuel economy. "I've been able to develop a strategy to come up with three of the four," said Hegbloom, but "I haven't seen anyone who can deliver on all four." Smaller and less capable are easy, but getting both the price and the fuel consumption down at the same time is where it gets tricky. As it is, a Ram 1500 with the diesel engine and rear-wheel drive delivers 29 miles per gallon on the highway, which is already more than the 27-mpg rating on the midsize Chevy Colorado and GMC Canyon. But Hegbloom figures that in order to justify a midsize pickup, American buyers would expect at least 35 mpg on the highway, and in order to do so, FCA would have to employ some trick tech, which would in turn raise the price beyond an attractive level. The last time Chrysler offered a midsize truck in America was with the Dakota that was discontinued in 2011. Ford similarly ceased offering the Ranger in North America in 2012, leaving the new Colorado and Canyon to take on the Toyota Tacoma and Nissan Frontier in the compact/midsize pickup market in the US. With the prospect of a Ram version apparently off the table, then, Fiat's midsize four-door pickup is likely take on the likes of the Volkswagen Amarok, Mitsubishi Triton and Toyota Hilux in markets like Europe and South America. But like those trucks, it will likely never see the inside of an American showroom.

Ralph Gilles named Fiat Chrysler head of design

The amalgamation of two major automakers like Fiat and Chrysler inevitably means that there'll be some redundancy. There can't be two design chiefs for the entire group, for example, so the Italian-American automaker has named just one to oversee all design for its various divisions – and that one individual is Ralph Gilles. A Chrysler group veteran, Gilles has been at Auburn Hills since 1992, and has held a number of key positions along the way. He has until now served as senior vice president in charge of what's now known as the FCA North American Design Office – a position he assumed in June 2009 when it was still just the Chrysler design office – and has previously run the Dodge and SRT brands and headed up the company's racing activities. In assuming his new role as the group's Head of Design, Gilles will also step up to the FCA Group Executive Council. Meanwhile Lorenzo Ramaciotti, who joined Fiat as head of design in 2007 after serving the same function at Pininfarina, is now set to retire. Along with the Gilles appointment and Ramaciotti retirement, FCA has named Mauro Fenzi as group COO Systems and head of Comau, Fiat's robotic machinery division. FCA Announces Executive Changes - Appoints Gilles as Chief Designer - Names Fenzi COO Systems and CEO of Comau April 1, 2015 , London - Fiat Chrysler Automobiles N.V. (NYSE: FCAU / MI: FCA) today announced that Ralph Gilles was named Head of Design and member of the FCA Group Executive Council (GEC). He currently leads the FCA North American Design Office as Senior Vice President, a position he was named to in June 2009. The GEC is the highest management-level decision making body within the FCA organization and is led by the FCA Chief Executive Officer (CEO). Gilles succeeds Lorenzo Ramaciotti, who is retiring after several years of dedicated service with the Company. Ramaciotti will continue to lend his expertise to the group serving as a Special Advisor to the CEO. "We extend our sincere appreciation to Lorenzo for his unwavering dedication, service, leadership and many contributions to the organization," said Sergio Marchionne, Chief Executive Officer, Fiat Chrysler Automobiles N.V. Gilles previously served as CEO – Motorsports; President and CEO – SRT Brand and CEO – Dodge Brand for FCA US in addition to his leadership role in Design. He joined the Company in 1992.

Ram and Fiat working on possible midsize pickup for global markets

The midsize pickup segment is enjoying a recent boom globally, with updated models like the new Ford Ranger on the way and a revised Toyota Hilux already testing. The next automaker to take the plunge into the market might be FCA with this recently spotted, highly camouflaged truck. Click through the gallery to see the pickup wearing two different disguises during cold-weather testing. Unfortunately, they keep the truck very well hidden, and even the bed is covered in both of them. Still, it appears that the front end wears a fairly upright design, and the four-door cab is obvious. Also, take a look at the rear to spot coil springs for the suspension, rather than leaf springs. According to our spies, this vehicle's size is larger than the current front-wheel drive Fiat Strada and is closer in dimensions to models like the Ranger and Hilux. Of course, the most intriguing question is whether FCA might bring this vehicle to the US as a Ram competitor against the Chevrolet Colorado and GMC Canyon. The company's five-year plan makes no mention of such a model here through at least 2018, though. However, Europe and South America are set to receive a midsize pickup in 2016. Perhaps, that's what we are seeing here. Related Video: Featured Gallery Fiat-Ram Pickup Spy Shots View 14 Photos Image Credit: CarPix Design/Style Spy Photos Fiat RAM Truck FCA

Detroit 3 and UAW set for showdown over tiered wages

This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.

For some, getting a Fiat 500e last week was almost free

Auto-racing clubs know a thing or two about moving fast. And a couple of them out in California appeared to do just that when a bunch of incentives for the Fiat 500e electric vehicle added up to a pretty sweet deal. Actually, a borderline free one. Green Car Reports was kind enough to do the math on the calculation of an $83-a-month, three-year lease deal on that included a $2,100 perk and required an $11,000 downpayment on the $32,000 car. California and federal government incentives for EVs cut that downpayment down to $1,000 out of pocket once the incentives ($7,500 from the feds, $2,500 from the state) were factored in by the leasing company. Then, Fiat-Chrysler was throwing in another $1,000 for folks who were leasing a car from another car company, hence the freebie. That means some lucky people, at least temporarily, were able to work basically a zero-downpayment agreement for a three-year lease on a car whose monthly payment is the equivalent of about two full tanks of gas. Once word of those perks got around to some California racing clubs, about 100 500e vehicles to be moved off of California lots during the past week or so. Plugged in, indeed. Related Videos: Featured Gallery 2013 Fiat 500e: Review View 40 Photos News Source: Green Car Reports Green Chrysler Fiat incentives fiat 500e

Marchionne open to combination with Ford or GM

At the depths of the auto industry implosion, there was widely reported talk that General Motors and Chrysler would be merged into a mighty import-beating behemoth. While such notions clearly never materialized, that doesn't mean the idea is dead. In fact, FCA boss Sergio Marchionne still welcomes the idea of a partnership with either GM or Ford. He responded positively to the idea, calling it "technically feasible," when asked about it at the 2015 Geneva Motor Show, Automotive News reports. "There's bantering that goes on all the time," Marchionne told AN, before quashing suspicions that a plan was in the works by adding that "nothing substantive" was going on. Our favorite black sweater enthusiast isn't quite as interested in the idea of teaming with a foreign manufacturer like PSA Peugeot Citroen, or in the rumored tie-up with Volkswagen, though. That is a shame, particularly in regards to Marchionne's shut down of a partnership with the French, although it isn't necessarily surprising – FCA already consists of eight automakers, and as Sergio told AN, there's really nothing at PSA that could help the company out. What are your thoughts? Is there an obvious project or segment that would benefit from an FCA partnership with Ford or GM? Have your say in Comments. News Source: Automotive News - sub. req.Image Credit: Marco Bertorello / AFP / Getty Images Chrysler Fiat Ford GM Sergio Marchionne FCA merger

Fiat version of Mazda MX-5 Miata to be called 124 Spider

Fiat has a definite use for its recent US trademark on the 124 Spider name, and it's something that should make many performance fans quite happy. FCA CEO Sergio Marchionne confirmed to Auto Express that the Italian brand's future roadster would bear the classic name. Auto Express reportedly asked Marchionne directly about the convertible at the 2015 Geneva Motor Show. The CEO said: "Do we want to do it now?" After another executive verified the name, Marchionne responded: "There you go – a world class premiere right in this room!" Autoblog reached out to Fiat Brand communications boss in the US Ariel Gavilan for more information, and he verified the story. Gavilan said that brand head Olivier Francois confirmed the 124 Spider name to international media during a briefing in Geneva. FCA isn't going quite so far as officially confirming that the 124 Spider shares a platform with the latest Mazda MX-5 Miata, but that's almost a certainty. The two automakers jointly developed the chassis, and the original plan was for it to underpin an Alfa Romeo. However, Marchionne didn't want an Alfa assembled outside of Italy. Fiat even hinted at this possible change as far back as the corporation's five-year plan last summer. Insiders tell Auto Express that the 124 Spider reportedly carries retro-inspired style, and hopefully, that means the roadster evokes the look of the original 124 Sport Spider (pictured above) by Pininfarina. Fiat allegedly is also aiming for a weight less than 2,205 pounds, and the engine range is likely comprised of versions of the brand's 1.4-liter turbo. The mill already pumps out 160 horsepower and 183 pound-feet of torque in the Fiat 500 Abarth in the US. According to Auto Express, Fiat and Mazda have an agreement to launch the Miata in 2015 and the 124 Spider in 2016. A hotter Abarth version could come along eventually, too. Related Video: