Fiat Barchetta, page #13

Auto blog

VW's Goodwill Effort, Highlights from Dubai, Fiat's Truck | Autoblog Minute

Autoblog Senior Editor Greg Migliore recaps the week in automotive news. Including highlights from VW's TDI goodwill initiative, the Dubai motor show, and Fiat's new midsize pickup. Fiat Autoblog Minute Videos Original Video dubai dubai motor show

Fiat introduces new Fullback pickup

Fiat has unveiled its first foray into the mid-size pickup truck market, the Fullback, at the Dubai Motor Show. It's not an entirely new product, confirming earlier reports. It's closely related to the Triton pickup (also known as the L200) that Mitsubishi builds in Thailand for markets in Europe, Asia, and Africa. Moreover, it's not likely ever to make it to North American showrooms. Riding on a 118-inch wheelbase, it measures 208 inches long, 71 inches wide and 70 inches tall. Those are identical measurements to the Mitsu, and give it roughly similar dimensions to the Chevy Colorado/GMC Canyon we get here. The Fullback can carry up to 2,300 pounds, and is powered by a 2.4-liter turbo diesel engine available in either 150- or 180-horsepower states of tune, and mated to a six-speed manual or five-speed automatic transmission. Fiat Professional will roll out the Fullback in markets across Europe, the Middle East, and Africa, where it will compete against the likes of the Toyota Hilux, Ford Ranger, and Volkswagen Amarok. FIAT PROFESSIONAL DEBUTS NEW FULLBACK PICK-UP TRUCK AT THE DUBAI INTERNATIONAL MOTOR SHOW - New FIAT Professional pick-up truck to be named Fullback – a name derived from the cornerstone position in rugby and American football - Available in the UK in autumn 2016, the FIAT Fullback will combine a practical double-cab body style with a spacious load area and competitive payload of 1,045kg - Powered by a 2.4-litre turbo-diesel engine, with 150hp or 180hp outputs, the FIAT Fullback will have four-wheel drive as standard, combined with a manual or automatic transmission - More details, including pricing and final specifications, will be announced closer to the launch of the FIAT Fullback in the UK FIAT Professional has unveiled the all-new FIAT Fullback pick-up truck at the 2015 Dubai International Motor Show. The new, medium-duty pick-up will join the award-winning FIAT Professional range in autumn 2016 and will be available only with a practical double cab body style configuration in the UK making it an ideal vehicle for both commercial and leisure time activities. Measuring up to 1,780mm in height, 1,815 mm in width and 5,285mm in length, with a wheelbase of 3,000mm, the new FIAT Fullback will offer a competitive payload of 1,045 kg and will be powered by a 2.4-litre, aluminium, turbo-diesel engine with a power output of either 150hp or 180hp.

Fiat teases upcoming new 124 roadster

Enthusiasts have been waiting for some time for the debut of the Fiat 124. And we've had some pretty good glimpses at what to expect along the way. But now Fiat has dropped the first official teaser images to prepare us for the arrival of its upcoming new roadster. The model tipped to revive the number 124 represents Fiat's version of the program that has already given us the new Mazda MX-5 Miata. The Italian counterpart was originally slated to wear the Alfa Romeo badge, but concerns that customers wouldn't welcome an Alfa made in Japan led FCA to repurpose the program as a Fiat. That brand already produces its vehicles in locations around the world, including the 500 in Poland and Mexico, the 500L in Serbia, and the upcoming Tipo in Turkey. Another Fiat made in Japan, then, wouldn't be as much of a stretch as it would be for Alfa Romeo, which manufactures exclusively in Italy. As we were able to see from the most recent spy shots, the Fiat 124 will adopt similar (if not identical) proportions and layout to the MX-5, but with its own unique sheetmetal. And that, as you can see from these line drawings, will include a prominent belt line melding into a muscular rear haunch. Expect FCA's own engines to slot in under the hood, including the turbo four from the Fiat 500 Abarth and the more potent one from the Alfa Romeo 4C. Given Fiat's timing in releasing these teasers, we have a good feeling the 124 could debut at the LA Auto Show later this month. The SoCal auto expo always proves a good setting at which to unveil a new convertible – especially one as vital to a brand's US presence as the 124 will be for Fiat. So watch this space.

Mopar highlights wild SEMA creations, AWD Challenger Concept

Thanks to 15,345 square feet of display area, FCA US' Mopar division certainly has ample space to display its parts and accessories at the SEMA Show. To lure attendees to check out all of those cars and components, the company is now revealing ten tuned vehicles for this year's aftermarket event. This isn't even the brand's whole fleet for the show, but it includes some major highlights for Dodge and Ram fans. A lack of traction traditionally makes rear-wheel-drive muscle cars dismal to drive when the weather gets slippery, but the Dodge Challenger GT AWD Concept (above) solves that age-old problem at SEMA. In addition to powering all four wheels through an eight-speed automatic, it boasts an angry-looking, wide-body kit with aggressively flared wheel arches. The asymmetrical stripe with Header Orange accents also adds some extra panache to the Destroyer Grey and Matte Black color scheme. The coupe can back up the macho look thanks to the Scat Pack 3 Performance Kit that adds 75 horsepower and 44 pound-feet of torque to the 5.7-liter V8. However, before you get too excited about driving one this winter, FCA US spokesperson Ariel Gavilan tells Autoblog: "It is only a concept." Mopar isn't done tuning Dodges for SEMA. The Charger Deep Stage 3 shows what's possible with the company's catalog by packing the Scat Pack 3, strut tower braces, coilover suspension kit, and bigger brakes. Meanwhile, the blacked-out Dart GLH Concept tries to harken back to the style of the famous Omni GLH by fitting a red-accented body kit, including a Mopar Performance aluminum hood. If the standard Ram 1500 Rebel is somehow too subdued, check out the Rebel X (right) in a vibrant shade called Copper. To be ready for anything offroad, it wears some muscular flares to fit 17-inch beadlock wheels and 35-inch Toyo tires. A concept, two-piece front skid plate protects the front. Drivers should also be comfortable no matter where they drive thanks to prototype Katzkin leather seats and a concept air-ride suspension. Chrysler enjoys some mods, as well. The 300 Super S has suave style with Matte Cerulean paint, concept 22-inch wheels, and a grille with little Mopar Ms dotted around it. Performance also sees a boost with a tuned engine, bigger brakes, and coilover kit. The gray 200 S Mopar is similarly stylish with a complete body kit, including a conceptual, dual-vented hood. Fiat and Ram's commercial models aren't left out of the SEMA fun, either.

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

FCA recalls 894k total vehicles worldwide in two campaigns

FCA is recalling a total of 893,698 vehicles worldwide in two campaigns to fix problems with inadvertent airbag deployment, failure of the anti-lock brakes, and stability control systems in the Jeep Grand Cherokee, Liberty, Dodge Journey, and Fiat Freemont. 559,703 of these vehicles are in the US. The larger recall affects 284,089 examples of the 2003 Jeep Liberty and 2004 Jeep Grand Cherokee, and there are also 13,411 of them in Canada, 6,277 in Mexico, and 48,212 outside the NAFTA region. Because of "electrical noise beyond the tolerance of the airbag electronic control module", part of that component can fail, according to the National Highway Traffic Safety Administration. This can cause the front and side airbags to deploy and the seatbelt pre-tensioners to activate inadvertently. FCA US has seven reports of alleged injuries from this problem. To fix the situation, the Jeeps need their Occupant Restraint Control modules replaced, as well as the front- and side-impact sensors. According to the NHTSA, the replacement parts won't be available until early 2016. Still, FCA US will advise owners about the problem in a letter by the end of December and will send a second notification when the components are ready. The second campaign affects 275,614 examples of the 2012-2015 Dodge Journey in the US; plus 78,148 of them in Canada, 36,471 in Mexico, and 151,476 left-hand drive units outside of NAFTA where it's sold as the Fiat Freemont. On these vehicles, water intrusion can disable the anti-lock brakes and electronic stability control, although a warning light often illuminates when this issue occurs, and the problem doesn't affect regular braking. There are also no reports of injuries or accidents. To fix the issue, dealers will seal the ABS wiring harness and will replace any already affected components as necessary, like the ABS module or the headlamp and dashboard wiring harness. Statement: Occupant Restraint Control Modules October 30, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 284,089 older-model SUVs in the U.S. to replace their Occupant Restraint Control (ORC) modules and front and/or side-impact sensors, as required. Within this vehicle population, FCA US became aware of seven injuries caused by inadvertent air-bag deployments and advised NHTSA accordingly. The affected vehicles are not equipped with Takata Corp. air-bags. The Company is unaware of any related accidents.

Mopar teases four of 'nearly 20' SEMA Show concepts

Yesterday it was Chevrolet. Today, Mopar has dropped some SEMA knowledge, releasing a quartet of teaser images that give us some indication of what kind of cars, trucks, and crossovers Fiat, Chrysler, Dodge, Jeep, and Ram will be showing in Las Vegas. Like Chevy, Mopar's concepts utilize both production and concept accessories, although Fiat Chrysler has gone a bit more indepth on at least one of its concepts. Immediately, the most tantalizing teaser is the one shown above. Yes, that's the back of a Challenger, and aside from the bright orange accents on the gray body, you should take notice of the badge mounted on the spoiler – yes, that says "GT AWD." To be honest, such a vehicle wouldn't be a huge shock, as both the Challenger's LX platform-mates, the Dodge Charger and Chrysler 300, are offered with all-wheel-drive options. Still, adding such a vehicle to the production cycle would give Dodge a leg up on the rear-drive only Ford Mustang and Chevrolet Camaro. Aside from that concept, FCA has also released teasers of a Ram-based concept, a 300-based concept, and what we're guessing is a Fiat 500X. We can't wait to see what the actual Fiat concept has to do with kiteboarding. As for the 300 and Ram, there's not a lot of hints on what sort of styling details they'll contain. The Chrysler has additional LED accents and what we're guessing is matte blue paint, while the Ram is based on a Hemi-powered 1500 with Rebel styling cues. This is just a very tiny sample of Mopar's final SEMA roster, which include "hundreds" of parts. There should also be a total of 20 vehicles covering all four former Chrysler Group brands, as well as Fiat. Naturally, we'll have plenty to report on each vehicle once the SEMA show kicks off in the next couple weeks.

UAW ratifies FCA contract

The second time was apparently the charm for the proposed contract between the United Auto Workers and FCA US as 77 percent of union members have ratified the four-year deal, it was announced Thursday. "This agreement represents an investment in our US workforce and recognizes its contributions to the company's growth over the past six years." the automaker said in a statement. Now, the UAW must move forward on new arrangements with Ford and General Motors. After members rejected the original offer, UAW president Dennis Williams (pictured above, right) was positive about the new deal's acceptance. "The resolve of our membership and the dedication of our negotiating team has produced an agreement that affords UAW members a strong wage package and job security while still allowing the company to competitively produce high quality vehicles for our customers," he said in a statement. In contrast to the last offer, the new contract largely eliminates the two-tier wage system, and it's now it's possible to attain the same $29 per hour pay over eight years of employment. According to the Detroit Free Press, the deal also no longer limits FCA US from hiring entry-level workers. The original plan for a healthcare co-op across the Detroit automakers is also axed from the latest arrangement. While the strategy was supposed to lower costs, the potential changes weren't explained well to union members, and they rejected it. UAW FCA MEMBERS RATIFY NEW CONTRACT Featured / Negotiations / October 22, 2015 DETROIT – The members have voted to ratify a new four-year collective bargaining agreement with FCA by a 77% majority. The results of the voting are as follows: • Production workers – 77% • Skilled Trades – 72% • Salaried Bargaining Unit – 87% President Williams stated, "The recent bargaining process that took place on behalf of our members at FCA is a testament to the UAW's democratic values and commitment to our members. The resolve of our membership and the dedication of our negotiating team has produced an agreement that affords UAW members a strong wage package and job security while still allowing the company to competitively produce high quality vehicles for our customers." "UAW members at FCA have obtained a strong agreement that provides substantial wage gains, fairness in the workplace, and job security.

Ferrari families have 'agreement' to prevent takeover

With its initial public offering already a massive success, Ferrari is now officially a publicly traded company on the New York Stock Exchange. While anyone can buy those shares, don't expect investors to take control away from some of the top owners of the Prancing Horse anytime soon. To maintain their power, Enzo Ferrari's son, Piero, and Exor chairman John Elkann will sign a deal guaranteeing themselves nearly half of the automaker's voting rights, Bloomberg reports. As part of this arrangement, shareholders that agree to hang onto Ferrari stock for at least three years would receive additional voting rights in the company, and that would give Piero and Elkann a combined 48.7 percent of the automaker by banding together. While not quite complete control, the move should be enough to prevent a takeover of the business. "We have an agreement among the families to protect our interests in Ferrari," Piero said to Bloomberg. This agreement won't really become a concern until next year because only 10 percent of Ferrari will be traded for now. FCA will distribute another 80 percent to its shareholders in early 2016, and Elkann's Exor will be getting the largest portion of the Prancing Horse in the spin-off. Meanwhile, Piero holds the remaining 10 percent but has absolutely no intention to sell his stake in his father's business. The newly public Ferrari will push to grow volume with a goal of moving 9,000 vehicles annually by 2019. To reach that 30-percent boost, expect to see a new model every year, and some of them might use a new, modular platform that's reportedly under development. Related Video:

Ferrari raises $893M, valued at $12B

Ferrari's stock is moving as quickly on the New York Stock Exchange as the brand's iconic sports cars do on the road. The company's incredibly popular initial public offering has already raised $893.1 million by virtue of 17.18 million shares sold for $52 apiece. If the deal's underwriters buy in as well, the figure would grow to $982.4 million. Plus, even after shouldering some of FCA's debt, the automaker carries an enterprise value of $12 billion, Bloomberg reports. Just as the company starts trading on the New York Stock Exchange, the share price is already racing upward, too. As of this writing, Ferrari stock, which is listed under the symbol RACE, is priced at $57.59. At its high so far today, the value reached as high as $60.95. While Ferrari is looking strong, the big winner in this success looks to be FCA because the company should raise $4 billion in the spin-off, according to Bloomberg. With nine percent of the sports car maker on the NYSE and one percent for the underwriters, another 80 percent will be distributed to FCA investors in 2016. When that's through, Exor, the holding company for the Agnelli/Elkann family, should have the largest stake at about 30 percent. Piero Ferrari holds the remaining 10 percent and has no intention to sell it. Related Video: FCA Announces Pricing of Initial Public Offering of Ferrari N.V. Common Shares Fiat Chrysler Automobiles N.V. (NYSE: FCAU/MI: FCA) ("FCA") and its subsidiary Ferrari N.V. ("Ferrari") announce today the pricing of Ferrari's initial public offering of 17,175,000 common shares at an offering price of $52 per share for a total offering size of $893.1 million ($982.4 million if the underwriters exercise the option described below in full). The shares are expected to begin trading on the New York Stock Exchange on Wednesday, October 21, 2015, under the symbol "RACE", and closing of the offering is expected to occur on October 26, 2015. In addition, the underwriters have a 30-day option to purchase an aggregate of up to 1,717,150 common shares of Ferrari from FCA. The offering is intended to be part of a series of transactions to separate Ferrari from FCA. Following completion of this offering, FCA expects to distribute its remaining ownership interest in Ferrari to FCA shareholders at the beginning of 2016. UBS Investment Bank is acting as Global Coordinator for the offering.