Fiat 1500 Series, page #16

Auto blog

Marchionne urges industry consolidation, again

Sergio Marchionne isn't just an instigator of mergers – he's also a staunch advocate for their need in the industry. And he seems convinced another big one will happen in the next few years. "I am absolutely certain that before 2018 there will be a merger," said Marchionne. "It's my personal opinion, based on a gut feeling." Though the terms "absolutely certain" and "gut feeling" would seem to convey vastly different degrees of certainty, his chief's statement would seem to suggest some inside knowledge of an impending deal. Marchionne, of course, brokered the consolidation of the Fiat Chrysler Automobiles empire over which he now presides, and has been actively seeking another merger to help reduce redundancy and overhead between major automakers in the industry. With which automaker he might be seeking such a merger, however, remains a big question. He was recently reported to have approached Mary Barra regarding a potential merger with General Motors, but was said to have been rebuffed. The Italian-Canadian executive may not be alone in his advocacy for industry consolidation, though. Opel chief Karl-Thomas Neumann said that "In principle, Marchionne is right – the auto industry develops the same things ten times over." Bringing major automakers together would ostensibly reduce that redundancy. Marchionne had been linked to a potential takeover of Opel when GM was shedding brands post-bankruptcy, but in the end the Detroit giant opted to keep its European division in-house.

Marchionne emailed Barra about merger between FCA and GM

Sergio Marchionne is adamant that global automakers will have to merge to remain profitable in the near future, and he'll tell that to anyone who's listening. Mary Barra, however, is not interested. According to The New York Times, the Fiat-Chrysler chief proposed a merger with General Motors via email to his counterpart back in March. Marchionne proposed meeting to discuss the matter, but Barra and her team reportedly rejected even entertaining the idea. This of course is not the first time Marchionne has raised the idea of a merger. He masterminded the marriage between Fiat and Chrysler, and reports have since suggested further mergers with Volkswagen, Peugeot, Ford, and others – including GM's own Opel unit. Some have taken his calls for consolidation as a weakness, but Marchionne insists that his empire is in good health – and that it's the industry as a whole which is in an untenable position. According to his view, automakers around the world need to align themselves into larger groups in order to reduce redundancy in investment, development and infrastructure – the duplication of which he terms as wasteful. "It's fundamentally immoral to allow for that waste to continue unchecked," said Marchionne to the Times. "I think it is absolutely clear that the amount of capital waste that's going on in this industry is something that certainly requires remedy," he said in a conference call with industry analysts late last month following the rejected GM approach. "A remedy in our view is through consolidation." News Source: The New York TimesImage Credit: Paul Sancya/AP Chrysler Fiat GM Sergio Marchionne merger fiat chrysler automobiles

Fiat reveals new Aegea Project sedan in Istanbul

You'd be forgiven for boiling Fiat down to the 500 and its growing roster of spinoffs, but overseas the Italian brand sells a wide range of models. Like this new sedan, for example. Unveiled today at the Istanbul Motor Show is the Fiat Aegea Project, in reference to the sea on the western shore of Turkey, where FCA operates one of its largest plants. The Fiat Aegea Project has about the same exterior dimensions as a Ford Focus sedan, with room for five and an array of gasoline and diesel engines ranging from 95 horsepower to 120, mated to a manual or automatic transmission. While tacking a trunk on to a hatchback (or carving a notch out of a sport wagon) may be common practice with some of its competitors, the Aegea was designed from the get-go as a three-box sedan, giving it better balanced proportions. Design work was carried out in Italy at the company's Centro Stile, with development undertaken at the Tofas R&D center adjacent to the Bursa plant where it will be built. Though sure to get a different name before it reaches production, the Aegea is slated to go on sale in Turkey this coming November before rolling out to 40 more markets in Europe, the Middle East and Africa. Just don't expect it to see it nestled between a couple of neo-Cinquecentos in showrooms Stateside. Related Video: NEW FIAT AEGEA PROJECT DEBUTS AT ISTANBUL MOTOR SHOW - The new FIAT compact sedan makes its debut today at the Istanbul Motor Show, in recognition of Turkey's strategic importance to FIAT Chrysler Automobiles global operations - Conceived from the outset as a three box sedan, it combines harmonious design with highly efficient use of space - The name of the project – FIAT Aegea Project – also pays tribute to Turkey's pivotal role in its development, manufacture and anticipated success - On sale from November in Turkey, it will gradually reach over 40 countries across Europe, the Middle East and Africa The all-new FIAT compact sedan debuts today at the Istanbul Motor Show. Designed in Italy at the FIAT Chrysler Automobiles Centro Stile, and developed in Turkey together with Tofas R&D, one of FCA's largest research and development centres, the new model will be manufactured in the Bursa plant in Turkey, which has been designated Gold Medal status by World Class Manufacturing in recognition of its efficiency, quality and eco-friendliness.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.

Mopar boss promoted at FCA, still runs Mopar

Fiat Chrysler Automobiles is appointing Pietro Gorlier as its new chief operating officer for components. The change in title is effective June 30 and means that he reports directly to Sergio Marchionne. He already runs Mopar globally. Gorlier is replacing Eugenio Razelli, who is leaving the automaker. Even with the new position, Gorlier continues to be the boss at Mopar and retains his seat on FCA's global executive council, which is the company's top decision-making group. This is essentially one more step up the ladder for the Turin-born executive. Gorlier became CEO of Mopar service, parts, and customer care for FCA US in 2009 and took over that role worldwide in 2011. FCA announces new appointment Fiat Chrysler Automobiles N.V. (NYSE: FCAU / MI: FCA) announced today that effective June 30, 2015, Pietro Gorlier is appointed Chief Operating Officer Components reporting directly to the Chief Executive Officer Sergio Marchionne. Mr. Gorlier will also retain his current responsibilities as Head of Parts & Service (MOPAR) and member of the Group Executive Council. Mr. Gorlier will succeed Eugenio Razelli, who elected to leave the Group after several years of dedicated service. "We extend our sincere appreciation to Eugenio for his leadership and contribution to the organization" said Sergio Marchionne. Pietro Gorlier is Head of Parts & Service (MOPAR) and a member of the Group Executive Council (GEC) since September 1, 2011. He joined the Group in 1989 in Iveco and held various positions in Logistics, After Sales, and Customer Care before joining the automobile business in 2006 in Network Development. He holds a Master of Economics from the University of Turin. London, 18 May 2015 Related Video: News Source: FCA Hirings/Firings/Layoffs Chrysler Fiat FCA fiat chrysler automobiles fca us

NHTSA questions FCA's reaction to recalls, will hold public hearing

The US Department of Transportation and National Highway Traffic Safety Administration are holding a public hearing on July 2 to investigate whether FCA US is failing to fix safety problems and issue necessary notices. The agencies also want detailed accounts of the handling of 20 recalls by June 1 as part of a special order. If the Feds determine that the automaker isn't living up to its legal requirements, the result could go as far as a "buy-back or replacement of affected vehicles." "Significant questions have been raised as to whether this company is meeting its obligations to protect the drivers from safety defects, and today we are launching a process to ensure that those obligations are met," NHTSA administrator Mark Rosekind said in the announcement of the hearing. The 20 recalls that the agencies are investigating date from between 2013 and 2015. Just some of these include the action to make the fuel tanks safer on the Jeep Grand Cherokee and Liberty; FCA US' Takata inflator repairs; inadvertently deploying airbags in the Liberty, Grand Cherokee and Dodge Viper; and the company's ignition switch fix for the Chrysler Town & Country, Grand Caravan and Journey. Failure to submit reports about all of these on time could result in a $7,000 per day fine. You can read the whole list in the PDF for the special order. In a statement to Autoblog, FCA US said, "The average completion rate for FCA US LLC recalls exceeds the industry average and all FCA US campaigns are conducted in consultation with NHTSA. The Company will cooperate fully." The government agencies claim that they have received complaints from customers alleging that they weren't notified of recalls; parts not being available; difficulty getting an appointment, and misinformation from dealers. During the hearing witnesses from FCA US, NHTSA and the public have the opportunity to present evidence on each campaign. U.S. DOT Announces Fiat Chrysler Public Hearing and Issues Special Order NHTSA has concerns about 20 recalls and sets public hearing date for July 2 WASHINGTON – U.S. Transportation Secretary Anthony Foxx today announced that the Department's National Highway Traffic Safety Administration (NHTSA) will hold a public hearing to determine whether automaker Fiat Chrysler has failed to remedy safety defects and issue required notices in 20 recalls.

FCA plants skipping summer shutdown to keep up with demand

Hopefully, some FCA US factory employees don't have big plans for the usual summer shutdown, because the automaker is keeping several plants running this year. Demand is so high that the company wants to keep models rolling off the assembly lines. Four FCA US assembly plants, all the engine factories, and some locations that build transmissions are staying open throughout the summer, according to the Detroit Free Press. Usually, these sites would see a two-week shutdown for the company to retool and perform repairs. This year, factories are staying open for FCA to support its strong sales. The lines that remaining humming through the summer show an inclination toward the automaker's popular SUV's and crossovers. They include the Jefferson North Assembly Plant in Michigan that builds the Jeep Grand Cherokee and Dodge Durango; Saltillo Van Assembly in Mexico that constructs the Ram ProMaster; Toledo Assembly Complex in Ohio that produces the Cherokee and Wrangler; and Toluca Assembly in Mexico that makes the Dodge Journey and Fiat 500. Related Video: News Source: The Detroit Free PressImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Dodge Fiat Jeep RAM FCA dodge journey fca us ram promaster Jefferson North Assembly Plant

Marchionne impressed by 'that kid' Elon Musk

FCA boss Sergio Marchionne has a reputation as an incredibly canny businessman. Some examples of his acumen include finishing Fiat's takeover of Chrysler from a beachside home and winning a challenge with Luca di Montezemolo for the reins of Ferrari. The Italian exec recently took a trip to California and lavished praise on Elon Musk after a meeting with the Tesla CEO. Although, the compliment did come off as a little patronizing. "I'm incredibly impressed with what that kid has done," Marchionne said to Reuters about his conversation with Musk. Unfortunately, the FCA exec didn't go into detail about what he and Tesla boss discussed. Although, calling the 43-year-old billionaire a "kid" does seem a little rude, especially given Musk's success with Paypal, in the auto industry and at SpaceX. While in the Golden State, Marchionne also had a talk with Apple CEO Tim Cook. Although, he was similarly cagey about what the men discussed. "He's interested in Apple's intervention in the car, that's his role," Marchionne said to Reuters about the conversation without divulging more. The two companies already have some small links thanks to Ferrari's use of the tech giant's products. As one additional highlight for Marchionne's California trip, he took a ride in the Google autonomous car. News Source: ReutersImage Credit: Paul Sancya / AP Photo Green Chrysler Fiat Tesla Green Culture Technology Emerging Technologies Autonomous Vehicles Electric Sergio Marchionne FCA

Petrolicious shines the spotlight on a little-known, Fiat-based racecar

Petrolicious has a way of finding intriguing, obscure vehicles that are owned by fascinating people all across the world. In this latest video, the filmmakers discover the soft-spoken Fabrizio Lorenzoni in Italy and showcase his utterly gorgeous Fiat 1100 Stanguellini. Stanguellini was a mechanic from the sports car hotbed of Modena, Italy, who earned a name for himself by modifying Fiat engines for racing. This one started its competition life in 1948 with open wheels but gained these curvaceous fenders a few years later for events like the Mille Miglia. Lorenzoni was lucky enough to grow up right on the course of Parma-Poggio di Berceto road race. His father must have loved seeing the Italian sports cars zipping by the home, too, because he bought the Stanguellini in 1955 with no intention of racing. It wasn't until 1977 that Fabrizio put the roadster back into competition. Petrolicious shoots Lorenzoni crammed behind the wheel of the little Stanguellini on some bucolic, Italian roads. It's absolutely a beauty to behold.

Work at a Chrysler dealership, get free college education

The cost of a college education in the US can put a student tens (hundreds, in some cases) of thousands of dollars into debt. FCA US wants to give its dealership employees a leg up, though, and the automaker is now offering a completely free education to them through a partnership with Strayer University. The workers can take any of the college's classes online or on campus through program called Degrees@Work. Currently, the offer is only available to employees Chrysler, Jeep, Dodge, Ram and Fiat dealers in the automaker's Southeast region, which includes Florida, Georgia, South Carolina, North Carolina, Alabama and Tennessee. However, a national expansion will happen before the end of the year, Strayer spokesperson Cristina Henley tells Autoblog. The program will cover all of the students' expenses, including their books, according to Henley. FCA US sees this partnership as a way to improve the talent of its workforce, retain employees longer and possibly attract people wanting to take advantage of this free education. "Many of our dealers have expressed concern over the availability of talent to fill open positions due to business growth and turnover in their stores, especially in metro markets," Al Gardner, the company's Head of Dealer Network Development, said in the Degrees@Work announcement. Strayer has about 40 programs available, including in business administration, accounting, marketing, and more, and the university offers associate's, bachelor's, and master's degrees. It will also give FCA US employees credit for their work experience to get them a diploma even more quickly. FCA US Dealers to Offer Employees No-Cost, No-Debt College Education FCA US teams with Strayer University to develop first-of-its-kind dealer program Degrees@Work program open to all employees of participating dealerships Employees can earn no-cost, no-debt degree through Strayer University All Chrysler, Jeep®, Dodge, Ram and FIAT dealerships may participate First phase of program rollout begins with dealers in the FCA US Southeast Business Center National rollout expected later this year May 4, 2015 , Auburn Hills, Mich. - Employees of Chrysler, Jeep®, Dodge, Ram and FIAT dealerships will have the unique opportunity to earn a no-cost, no-debt college degree through Strayer University's Degrees@Work program, developed in collaboration with FCA US LLC. FCA US is the only company in the automotive industry to offer the program.