Dodge Sprinter, page #26

Dodge Sprinter Price Analytics

About Dodge Sprinter

Auto blog

Preserved truck found at the bottom of frozen lake

A fisherman in central Minnesota pulled more than bluegill and bass out of his local fishing hole earlier this month. While ice fishing on Mayhew Lake, a local man was startled when, using an underwater camera to scout for fish, he discovered a vehicle sitting on the lakebed, the SCTimes reported. He immediately called the Benton County Sheriff's office, which sent deputies to examine the vehicle. Once they arrived, the deputies used their own camera to have a look and discovered a late-90s to early-00s model Dodge Ram pickup in roughly 12 feet of water. The Sheriff's department dive team was then dispatched to search the truck and the area surrounding it for bodies or valuables. The truck was lifted from the lakebed through a huge hole in the ice. The Sheriff's office ran the plates and discovered that it was reported stolen in March of 2000 from a nearby address. Investigators believe that given the truck's location, almost 100 yards from the lake's public access ramp and 25 yards from the north shore, that it was driven on to the lake while it was frozen, then allowed to sink to the bottom once the ice melted. Thanks to the lake's frigid waters, the truck was surprisingly well preserved. Aside from a missing grille, a coating of mud inside, and a patina of rust on the sheet metal, there was little damage to the truck despite its long rest in the lake. With an engine full of lake water and the damage done by roughly sixteen freeze-thaw cycles, the truck will never run again, but its condition is a good testament to the build quality of those old Rams. It certainly held up better than that '57 Plymouth Belvedere they buried in the time capsule under the Tulsa city courthouse. News Source: SCTimesImage Credit: Benton County Sheriff's Office Government/Legal Weird Car News Dodge Truck water lake

Bid on the incredible George Barris Supervan in Scottsdale

Barrett-Jackson's upcoming Scottsdale, AZ, auction features the groovy Barris SuperVan, which came from the mind of car customizing legend George Barris. He even autographed the interior. Passengers enter the SuperVan through the hinged windshield, and once inside they can party in style thanks to the roof-mounted disco ball. However, occupants can't get too wild because the massive side windows don't leave much room for privacy. Barris built the van around a 1966 Dodge Tradesman A-100 with a three-speed manual gearbox and a 318-cubic-inch V8. Barris originally called the van the "The Love Machine," and it later had quite a Hollywood career. Its on-screen appearances included the '70s movie SuperVan, and a repainted version served as a Hill Valley Transit bus in Back to the Future II. After his passing at age 89 last year, Barris' creation might see a further boost in value. Barrett-Jackson doesn't offer a price estimate for the SuperVan, but we can't wait to see what this groovy vehicle sells for with no reserve. Collectors already valued Barris' work before his death. For example, his 1960s Batmobile, which was likely Barris' most famous creation, went for $4.62 million at a Barrett-Jackson auction in 2013. Related Video: Lot #1306 1966 DODGE TRADESMAN A-100 BARRIS CUSTOM SUPERVAN Auction Scottsdale 2016 Reserve NO RESERVE Status Available Price Request Bidder Info Lot 1306 Location Tent 7 B - 1 Year 1966 Make DODGE Model TRADESMAN A-100 Style BARRIS CUSTOM SUPERVAN *Includes Buyer Commission Details VIN 24653301 Exterior Color RED/BLUE/SILVER Interior Color RED/BLUE Cylinders 8 Engine Size 318 Transmission 3-SPEED MANUAL Description Lot #1306 - Originally designed by George Barris as "The Love Machine" and reincarnated by Barris for the movie "SuperVan." It was used for many movies and TV shows after that, such as the Hill Valley Transit bus in "Back to the Future II," "Sea Quest" and the 1970 movie "Solar Crisis." The van has been completely restored to its "SuperVan" look and has since been signed by George Barris. Manual transmission. Featured Gallery Barris SuperVan Auction News Source: Barrett-Jackson Dodge Auctions Minivan/Van Special and Limited Editions Classics george barris barris

2025 SRT Hellcat concepts as previewed by high schoolers

Fiat Chrysler Automobiles has some very talented designers in its ranks. Like any good company, though, the automaker is always on the lookout for early talent. Even if they're still in high school. One of those talent-seeking initiatives is the company's Drive for Design contest, an event open to tenth-, eleventh-, and twelfth-grade students that are hoping for a future in design. For this year's event, students from across the country were given a shot to design their vision for a 2025 model-year Dodge SRT Hellcat. The results are impressive, as you can see in the gallery above. First place went to Ben Treinen, from Archbishop Moeller High School in Cincinnati. Second place was the only award to go to a student outside the Rust Belt, with Macon, GA's Harrison Kunselman, a student at Mount de Sales Academy taking the silver. Third place was won by a metro Detroiter – Bloomfield Hills High School student Hwanseong Jang, while fourth went to Andrew Gombac of Loyola Academy in Wilmette, IL. According to FCA, all four winners will have their sketches on display at the 2016 Autorama at Cobo Center at the end of February. They'll also win some pretty nifty prizes. First place will get a new Apple MacBook Pro, while second, third, and fourth get the new Apple iPad Pro and Apple Pencil (arguably just as good of a prize for budding designers). All four finishers will also attend a three-week automotive design course at Detroit's prestigious College for Creative Studies, have dinner with FCA designers, and score three passes to Autorama. FCA will cover travel and lodging to Auburn Hills. Read on for the official blast from FCA. Related Video: FCA US Design Team Announces Winners of Drive for Design Contest January 19, 2016 , Auburn Hills, Mich. - The FCA US LLC Design team today announced four winners in this year's Drive for Design contest. The FCA US Drive for Design contest challenged U.S. high school students in grades 10-12 to design a Dodge SRT Hellcat for the year 2025. "The Drive for Design contest continues to be a great way for the FCA US Design team to connect with students that show an interest in art and design," said Mark Trostle – Head of Dodge and SRT Design, FCA US LLC.

Will airbags sandbag the 2017 Dodge Viper?

The Dodge Viper is speeding down the road to cancellation for the 2017 model year, and at least part of the reason for the V10 monster's death is a problem fitting it with federally mandated side curtain airbags. An anonymous source close to FCA US told Motor Trend the automaker can't install the parts because they would further limit the coupe's already tight headroom. The government believes the side curtain airbags can reduce occupant ejections during accidents, and all vehicles must have them for the 2017 model year. The Viper's slow sales also don't provide FCA US much motivation to work out a solution to this problem. The automaker moved just 676 of the handmade sports coupes in the US in 2015, which was down 11 percent from 760 deliveries in 2014. FCA CEO Sergio Marchionne hinted at the Detroit Auto Show that the Viper could return eventually. He doesn't like that the current model has a dedicated platform but indicated a new one could share the underpinnings with another of the company's products. Marchionne's current business plan for FCA stresses building the automaker's value, so it might be a while before we see the sweater-clad CEO focusing on a niche vehicle like the Viper. Related Video:

New Viper 'is a possibility,' Sergio Marchionne says

It was thought the door to the future for the Dodge Viper had closed last year, but Fiat Chrysler CEO Sergio Marchionne reopened it during his press conference at the 2016 Detroit Auto Show. Marchionne said the current Viper is the only FCA product to use the ZD platform, which "doesn't make sense to me." Yet, "given the architectural development within the brand, there is a possibility that a new version of the Viper may surface." Automobile reports that the company uses a versatile, rear- and all-wheel drive Giorgio platform for Alfa Romeo and Dodge. It will support the Alfa Romeo Giulia (Alfa Romeo's larger BMW 5 Series competitor), the next-generation Dodge Challenger, Charger, and rumored Barracuda, and it could support a new generation of Viper. We're probably talking about a different kind of Viper, though, with Automobile saying, "the current car's truck-based V-10 no doubt would be scrapped along with its platform." A Viper without a V10 doesn't seem like a Viper to us, but we'll wait to see what happens. In the midst of contract negotiations for a new labor agreement between FCA and the United Auto Workers last year, it emerged that the Conner Avenue Assembly plant that builds the Viper hadn't been given any new product after the end of Viper build-out in 2017. That led most to reason that the current Viper would be the end of the 25-year run of America's hairiest sports car. How long we'll be waiting is unknown. Marchionne had no timetable and admitted that a future Viper might not appear on the heels of the current one. With a renewed commitment to being debt-free by 2018, FCA is likely more focused on getting Alfa Romeo running properly and cranking out the volume variants for the Giorgio platform first. Related Video: Featured Gallery 2014 SRT Viper GTS: Review View 36 Photos News Source: Automobile via World Car FansImage Credit: Copyright 2015 Drew Phillips / AOL Detroit Auto Show Dodge Coupe Performance Sergio Marchionne FCA conner avenue assembly plant

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Dodge Hellcats change their stripes for 2016

If you've been on the fence about ordering up a new Dodge with Hellcat power, this might just provide the extra incentive you were looking for. Starting this month, Dodge is offering a new stripe option, exclusive to its most powerful muscle cars. The SRT Hellcat stripes are now available to order on the top-of-the-line, 707-horsepower versions of both the Charger and Challenger. The dual full-length stripes run all the way up from the front lip, over the grille, up the hood, accentuating the NACA duct, along the roof, down the trunklid, across the rear spoiler, and down the rear bumper. They feature a carbon-fiber texture, and can be ordered with any of eleven colors for an extra $995. Along with the stripes, Dodge has also announced that it is extending the availability of the exclusive Plum Crazy color – which was originally scheduled to expire at the end of December – for another month. The throwback hue can be ordered on Charger and Challenger models ranging from the SXT through the R/T models all the way up to the SRT 392 and Hellcat. 2016 CHALLENGER AND CHARGER SRT HELLCAT MODELS EARN EXCLUSIVE STRIPES, DODGE EXTENDS PLUM CRAZY PAINT - All-new SRT Hellcat dual exterior stripe design adds even more Dodge attitude to 2016 Challenger and Charger SRT Hellcat models - SRT Hellcat-exclusive dual full-length carbon-fiber pattern stripes provide a customized-from-the-factory look - Dealers will start taking orders for Hellcat stripes in January 2016 - SRT Hellcat dual stripes have a U.S. Manufacturer's Suggested Retail Price of $995 - Dodge is answering enthusiast demand for Plum Crazy exterior paint with an additional one-month run of the legendary and limited-edition high-impact hue January 8, 2016 , Auburn Hills, Mich. - For more than a year, Dodge Challenger and Charger SRT Hellcat models — the fastest and most powerful muscle cars ever with 707 supercharged HEMI® horsepower each — have stormed roadways and drag strips with acceleration blasts to 60 mph in the low 3-second range, generated more than 61 million sensational YouTube video views around the globe, enabled an entirely new generation of Dodge enthusiasts and now for 2016 have been rewarded with their very own Dodge performance stripes.

FCA adds Apple CarPlay and Android Auto to Uconnect

Fiat Chrysler Automobiles has three showcases ready for this week's Consumer Electronics Show. The spotlight reveal is a "glimpse" of the fourth-generation Uconnect system, which now gets Apple CarPlay and Google's Android Auto. They lead the advances due to be rolled out this year, which include beefier internals for faster startup and processing, the next evolution of the Uconnect navigation system, capacitive touchscreens, and higher resolution screens. Going beyond the vehicle, a concept display will present solutions to help drivers achieve "Car. Life. Balance." That means, as we've heard before, a car that knows what you want before you realized you wanted it via monitoring your driving habits, communicating with other vehicles and traffic infrastructure, and prioritizing information in certain situations to keep the driver from being overwhelmed. A Waze-like community of road knowledge is also on the menu, and it allows for tagging of tag street conditions to inform other vehicles, and a follow-me mode where people can "request to follow other vehicles." Government types will want to scope out the 2016 Dodge Charger Pursuit with an exclusive Uconnect system boasting a 12.1-inch screen and enhanced resolution that can speak to the officer's mobile computer. Have a read of the press release below for more details. FCA Announces New Fourth-Generation Uconnect® Systems at 2016 Consumer Electronics Show in Las VegasLatest technology advancements help provide Car. Life. Balance.• Uconnect team announces fourth-generation Uconnect systems featuring improved performance; Apple CarPlay and Android Auto™ will be available globally in select models during 2016• CES attendees will experience a digital technology concept display that explores future intelligent transportation• FCA exhibit to feature concept brought to reality, the Uconnect 12.1-inch built-in touchscreen that enables integration of law enforcement computer systems with the industry standard Uconnect touchscreen systemJanuary 4, 2016 - Fiat Chrysler Automobiles N.V. and its subsidiary FCA US LLC are heading to the 2016 Consumer Electronics Show (CES) in Las Vegas with a display featuring the latest technology advancements in FCA vehicles and will provide a glimpse of the new fourth-generation Uconnect system featuring Apple CarPlay and Android Auto."The Uconnect team is evolving Uconnect and making it even better," said Joni Christensen, Head of Uconnect Marketing, FCA US LLC.

Question of the Day: Most heinous act of badge engineering?

Badge engineering, in which one company slaps its emblems on another company's product and sells it, has a long history in the automotive industry. When Sears wanted to sell cars, a deal was made with Kaiser-Frazer and the Sears Allstate was born. Iranians wanted new cars in the 1960s, and the Rootes Group was happy to offer Hillman Hunters for sale as Iran Khodro Paykans. Sometimes, though, certain badge-engineered vehicles made sense only in the 26th hour of negotiations between companies. The Suzuki Equator, say, which was a puzzling rebadge job of the Nissan Frontier. How did that happen? My personal favorite what-the-heck-were-they-thinking example of badge engineering is the 1971-1973 Plymouth Cricket. Chrysler Europe, through its ownership of the Rootes Group, was able to ship over Hillman Avanger subcompacts for sale in the US market. This would have made sense... if Chrysler hadn't already been selling rebadged Mitsubishi Colt Galants (as Dodge Colts) and Simca 1100s as (Simca 1204s) in its American showrooms. Few bought the Cricket, despite its cheery ad campaign. So, what's the badge-engineered car you find most confounding? Chrysler Dodge Automakers Mitsubishi Nissan Suzuki Automotive History question of the day badge engineering question

1970 Hemi Challenger is a family heirloom with serious muscle

Petrolicious turns up the emotion in its latest video about a family's connection to their 1970 Dodge Challenger. The orange muscle car that gets the spotlight here is a remarkably beautiful vehicle, but the story of a father and his sons at the core of this clip might leave you feeling a little misty eyed. Juan Escalante is the current owner of this Challenger, but it belonged to his dad first. Juan's father spotted the iconic muscle car during the 1969 Detroit Auto Show and had to have one. He soon placed an order for the orange '70 Challenger R/T with the rare combination for that year of a 426 Hemi V8 and a four-speed manual gearbox. The family even brought the coupe with them when they moved to Venezuela in 1972, and local fans dubbed it El Hemi. However, parts were scarce for the muscle car in that country, and it returned to the US in 1996 for a restoration. Now, the rumbling Challenger with its Coke-bottle profile and black hood is the world's most awesome family heirloom for the Escalantes. In this poignant video, Petrolicious shows how the coupe connects Juan to his father. Related Video: