2015 Dodge Ram 2500 4wd Crew Cab Laramie on 2040-cars

Auto blog

Dodge Challenger Scat Pack adds power and noise, with a warranty

If you want to go fast, there's certainly nothing wrong with the Dodge Challenger SRT8. With 470 horsepower and 470 pound-feet of torque for 2014, there's certainly not much to complain about. But what if you want something more aftermarket in flavor? There's no shortage of options, but while turning to the tuner world will make your car plenty fast, that extra power won't just shred rear tires, it'll torch your warranty, as well. That's where Dodge's Scat Pack comes in.
With three stages of mods for both the 5.7 and 6.4-liter Hemi V8s Challenger (as well as the 5.7-liter Charger and, soon, the four-pot Dart), the Scat Pack cars give drivers all the power, aggression and noise of a heavily modded aftermarket car while maintaining the piece of mind provided by the Dodge warranty.
Power gets bumped up to 485 horsepower and 475 pound-feet of torque with the 6.4-liter Scat Pack, while the 5.7-liter can provide up to 58 hp and 47 lb-ft of torque to add to the stock engine's 375 horsepower and 410 pound-feet. It's the latter engine that can really get some work done, with upgrades ranging from the mundane - intake and exhaust - to the racy, like the ported heads and high-flow headers.

SRT back to Dodge, Dart SRT, new Challenger, Charger and Caravan's death outlined in 5-yr plan

The onslaught of news from Fiat Chrysler's layout of five-year plans continued with Dodge CEO Tim Kuniskis this morning, including the unexpected announcement that SRT was coming back into the fold.
After just a few years existing as an independent entity within the Fiat Chrysler universe, an unceremonious press release hit in conjunction with today's lineup of announcements, saying "the SRT family of vehicles will be consolidated under the Dodge brand." Group CEO Sergio Marchionne thanked SRT headman Ralph Gilles for his dedication to the high-performance wing, calling out is efforts in expanding the vehicle lineup and including more customized models. He did not reference disappointing SRT Viper sales today, but we sense there's a bit of subtext.
With the SRT reunion at Dodge, it's appropriate that some of the most exciting product announcements for the next five years have to do with upcoming performance products. First out of the gate will be a refresh for that flagging Viper in 2015, which comes as little surprise.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.