Dodge D/W Series, page #13

Auto blog

Dodge Demon test mule spotted wearing unusual camouflage

The Dodge Demon apparently refuses to stay under wraps. The endless rollout of teasers continues each Thursday, but thanks to both Vin Diesel and our trusty spy photographer we have a whole suite of photos that show a nearly complete car in the flesh. This car appears to have been hiding in plain sight, as some of these photos were captured in the Detroit area. The car or cars in these photos is far less polished than the one shown in all of Dodge's teasers. The Air Grabber hood is unpainted, though it does come with some awesome hood pins. The same goes for the bolt-on fenders, as other pictures show a cleaner integration of the Demon's widebody modification. Despite the large Nitto logo on the top of the windshield, the cars in these photos are both wearing a set of Pirelli PZero All-season Plus tires on non-Demon wheels. It's as if drag radials aren't the best choice for winter driving. This car is fitted with two-piece Brembo brakes, but there's no telling if they're different than the standard Hellcat's. The decals on the side of the car may give clues to some of the Demon's equipment, but based on the LB Performance - commonly known as Liberty Walk- logo, the decals are likely more of a ruse than anything else. Liberty walk is famous in the tuning community for big, bolt-on body kits. The looks perfectly suit these test cars, though Borla exhaust and a Hurst shifter would be a wonderful addition to the Demon. Outside of that, there isn't much new to glean from these photos. Most of our questions about the Demon (horsepower, gearing, price) can't be had from pictures. Look for more news each Thursday in the lead up to the car's debut in New York in April. Related Video: Featured Gallery Dodge Demon Spy Shots View 14 Photos Related Gallery Dodge Demon Teasers View 17 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe dodge hellcat

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Will GM leave Europe? | Autoblog Podcast #504

On this week's podcast, Greg Migliore joins David Gluckman to discuss the possibility of GM selling off its Opel division to France's PSA (also known as Peugeot and Citroen). They also recap what they've all been driving lately, and the episode wraps up with Spend My Money buying advice to help you, our dear listeners. And, thankfully, no dad jokes this week. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. (If you record audio of a question with your phone and get it to us, you could hear your very own voice on the podcast. Neat, right?) And if you have other questions or comments, please send those too. Autoblog Podcast #504 Topics and stories we mention Dodge Durango Infiniti QX30 GM's version of Brexit could mean selling Opel Used cars! Rundown Intro - 00:00 What we're driving - 01:36 GM and Opel - 25:47 Spend My Money - 39:00 Total Duration: 54:46 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show on iTunes Podcasts Dodge GM Infiniti infiniti qx30

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Big rig gets blown over on Wyoming freeway, flattens police cruiser

A big rig navigating a stretch of windy Wyoming highway last week was blown over by high winds and landed on a Wyoming Highway Patrol cruiser. According to CBS News, three Wyoming Highway Patrol troopers responded to an accident along Interstate 80 near Elk Mountain on February 7. While the troopers were out of their cars assisting the crash victims, a white Volvo semi-truck lumbered up I-80 toward them. Wind gusts in that part of Wyoming were clocked in at up to 90 miles per hour on Tuesday, and one of them caught the semi as it neared the parked cruisers. Video from one of the cruiser's onboard cameras showed the big rig drift to the right as a big gust hit the trailer. Slowly, the whole rig tipped over and flattened one of the parked cruisers. The truck then slid a few feet on its side and came to a stop just aft of the cruiser. None of the troopers were injured in the incident, and two people in the truck came out of it unhurt as well. Patrol Lieutenant David Wagener told KGWN that that stretch of I-80 was closed on Tuesday to lightweight, high-profile vehicles. The truck driver was cited for the incident. High winds are no joke, and vehicles getting blown around or even clean off the road is a pretty common phenomenon. Way back in 2011, a truck got blown over in Utah. Then there was a train that got blown off a bridge in Louisiana in 2015. Related Video: News Source: CBS News, KGWN Auto News Dodge Volvo Driving Safety Truck Commercial Vehicles Police/Emergency Sedan semi truck rollover wyoming

What's big at the Chicago show | Autoblog Podcast #503

On this week's podcast, Mike Austin and David Gluckman discuss the big debuts at the 2017 Chicago Auto Show. They also recap what they've all been driving lately, and the episode wraps up with Spend My Money buying advice to help you, our dear listeners. And there's an awful Dad Joke thrown in there for you to find. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. (If you record audio of a question with your phone and get it to us, you could hear your very own voice on the podcast. Neat, right?) And if you have other questions or comments, please send those too. Autoblog Podcast #503 The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics and stories we mention Jaguar XE Volkswagen Golf R Toyota Highlander Hybrid Chicago Auto Show coverage Used cars! Rundown Intro - 00:00 What we're driving - 01:46 Chicago show preview - 22:58 Spend My Money - 35:36 Total Duration: 52:48 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show on iTunes Podcasts Chicago Auto Show Chevrolet Dodge Jaguar Toyota Volkswagen Truck Hatchback SUV Performance Sedan ford expedition jaguar xe volkswagen golf r 2017 Chicago Auto Show

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

The 2017 Dodge Charger Pursuit will always watch your back

Police cruisers spend the majority of their life parked and idle, waiting for the call to action. A parked car is a vulnerable one, especially when there may be incentive to disable or destroy that vehicle. FCA has worked with InterMotive, Inc., to supply safety technology that will detect movement behind the vehicle through the combined use of radar and the rear-view camera. Even better, FCA is putting this tech in every 2017 Dodge Charger Pursuit at no extra cost. According to InterMotive, the Officer Protection Package is designed to help awareness with an officer is parked and working inside the vehicle. The system will provide an alert if there is anyone moving behind the vehicle to ambush the officer. The system plugs into the OBDII port and is secured under the dash. The device can then be manually switched on. This triggers the rear parking sensors to activate and. If any movement is detected, the officer can look behind the car through the rear-view camera. The system will automatically lock the doors, roll up the windows and flash the taillights. No word on how much the system will cost for non-2017 vehicles, but it is available for order right now. Related Video: News Source: FCA Dodge Technology Police/Emergency

The Dodge Demon's massive hood scoop sucks air like a jet intake

You know what they say about cars with big hood scoops? They usually hide big blowers. At least that's the case with the Dodge Demon and its 45-inch wide hood scoop, the largest ever fitted to a factory production car. The fifth Demon teaser, "Forced Induction," shows off the increased capacity of the car's air intake and the resurrection of the Air Grabber hood scoop on Dodge's upcoming quarter-mile killer. View 4 Photos As with previous teasers, few details have been given outside of the Subaru-trouncing scoop's dimensions. Dodge says the scoop drops air inlet temperatures by more than 30 degrees. Where the more pedestrian Hellcat only has one air catcher headlight, both inner lights on the Demon are used to feed in air. The hood itself appears to channel air in and to the right into a new airbox that appears to be fitted with a K&N-style filter. Dodge seems intent on preventing any asthma issues with the new car. Standing in front of the car might literally take your breath away. Outside of that, the images don't show any new cryptic messages like previous teasers, or at least none that we can spot. One thing we did notice was that the engine block appears to be painted red, not orange like on the Hellcat. Doing some back and forth comparison also shows that the supercharger appears to be the same size as the current one. Of course, this is all speculative, so if you spot anything, drop a note in the comments. Related Video:

Equus Bass 770 | Autoblog Minute

Equus Automotive combines a Ford Mustang and a Dodge Challenger into one. Dodge Ford Luxury Autoblog Minute Videos Original Video 5g Connectivity Detroit supercar transportation mobility challenger luxury vehicle