Chrysler Other, page #19

Auto blog

Worker crushed to death at FCA's Jefferson North Assembly Plant [UPDATE]

Tragedy has struck a Fiat Chrysler factory. According to emerging reports, a worker was killed at the Jefferson North Assembly Plant early this morning in Detroit. The incident reportedly occurred in the waste water treatment facility at the plant, just after 7 a.m. this morning. The 53-year-old worker, whose name has not yet been released, is said to have been crushed in a press and was pronounced dead at the scene. The incident is currently under investigation to determine the exact circumstances. Jefferson North is where FCA assembles the Jeep Grand Cherokee and Dodge Durango. The plant is located on Conner Street near East Jefferson Avenue in Detroit. We've reached out to FCA US for the official statement, and will update you as soon as more details are available. Our condolences go out to the late worker's family and friends. UPDATE: Official statement from FCA added below. FCA US has had a tragic accident at its Jefferson North Assembly Plant during the first shift this morning. A plant employee died at the waste water treatment plant. The Company is currently working with local officials to investigate the incident. The name of the employee is not being released at this time. All of the FCA family extends its deepest sympathies to the employee's family during this difficult time.

Work at a Chrysler dealership, get free college education

The cost of a college education in the US can put a student tens (hundreds, in some cases) of thousands of dollars into debt. FCA US wants to give its dealership employees a leg up, though, and the automaker is now offering a completely free education to them through a partnership with Strayer University. The workers can take any of the college's classes online or on campus through program called Degrees@Work. Currently, the offer is only available to employees Chrysler, Jeep, Dodge, Ram and Fiat dealers in the automaker's Southeast region, which includes Florida, Georgia, South Carolina, North Carolina, Alabama and Tennessee. However, a national expansion will happen before the end of the year, Strayer spokesperson Cristina Henley tells Autoblog. The program will cover all of the students' expenses, including their books, according to Henley. FCA US sees this partnership as a way to improve the talent of its workforce, retain employees longer and possibly attract people wanting to take advantage of this free education. "Many of our dealers have expressed concern over the availability of talent to fill open positions due to business growth and turnover in their stores, especially in metro markets," Al Gardner, the company's Head of Dealer Network Development, said in the Degrees@Work announcement. Strayer has about 40 programs available, including in business administration, accounting, marketing, and more, and the university offers associate's, bachelor's, and master's degrees. It will also give FCA US employees credit for their work experience to get them a diploma even more quickly. FCA US Dealers to Offer Employees No-Cost, No-Debt College Education FCA US teams with Strayer University to develop first-of-its-kind dealer program Degrees@Work program open to all employees of participating dealerships Employees can earn no-cost, no-debt degree through Strayer University All Chrysler, Jeep®, Dodge, Ram and FIAT dealerships may participate First phase of program rollout begins with dealers in the FCA US Southeast Business Center National rollout expected later this year May 4, 2015 , Auburn Hills, Mich. - Employees of Chrysler, Jeep®, Dodge, Ram and FIAT dealerships will have the unique opportunity to earn a no-cost, no-debt college degree through Strayer University's Degrees@Work program, developed in collaboration with FCA US LLC. FCA US is the only company in the automotive industry to offer the program.

Weekly Recap: Marchionne's Manifesto again calls for industry consolidation

Sergio Marchionne isn't taking no for an answer. Despite public rebuffs from General Motors and Ford, the leader of Fiat Chrysler Automobiles continues to push for consolidation within the auto industry. His latest assertion came Wednesday when he said a combination of FCA with another automaker could net savings of $5 billion or more annually. No, this isn't about selling his company, he claimed, it's about cutting costs. Put simply, the auto industry wastes money, Marchionne said during FCA's earnings conference call. Companies invest billions to develop basic components that all cars use, but many consumers don't care how they work or recognize the differences. "About half of this is really relevant in terms of positioning the car in the marketplace," he said. "The other half, in our view, is stuff which is neither visible to the consumer nor is it relevant to the consumer." In 2014, top automakers spent more than $100 million on product development, FCA estimated. Marchionne said consolidation could save up to $1 billion on powertrains alone, noting that almost every automaker offers four- and six-cylinder engines. Not everyone has to make their own, he contended. "The consumer could not give a flying leap whose engines we are using because they are irrelevant to the buying decision." That's pretty provocative for enthusiasts, but less so for average consumers. Still, there are major differences in power and efficiency ratings, even among similar engines. Skeptics could argue consolidation would also weaken competition and reduce choices for car buyers. Marchionne stressed his presentation, curiously entitled Confessions of a Capital Junkie, wouldn't require closing factories or dealerships. It's not his final "big deal" as CEO, intent to sell FCA, or a way to elevate his company up the automotive food chain. He claims he wants to fundamentally change the industry and its habit for burning cash. "The horrible part about this, and the thing that I find most offensive, is that the capital consumption rate is duplicative," he said. "It doesn't deliver real value to the consumer and it is in its purest form, economic waste." Other News & Notes Ford Profits dip in first quarter Ford profits fell $65 million to $924 million in the first quarter, hampered by slight dips in revenue and sales.

FCA earnings improve in first quarter

Following on the recent global financial releases from Ford and from General Motors for the first quarter of 2015, FCA is now putting out its own numbers, and things look quite good for the company. The automaker posted adjusted earnings before taxes and interest of $895 million, a 22-percent jump from Q1 2014, and net profits of $103 million, a $296-million boost from last year. Revenue was also up 19 percent to $30 billion. Despite the favorable figures, actual worldwide shipments fell slightly by 2 percent to 1.1 million vehicles. FCA is giving some credit for these strong Q1 results to the automaker's performance in the NAFTA region. Shipments grew 8 percent to 633,000 vehicles, and net revenue jumped a strong 38 percent to $18.1 billion. Adjusted earnings reached $672 million, compared to $425 million in 2014. The company especially praised the Jeep Renegade, Chrysler 200, and Ram 1500 for helping the bottom line. The numbers could have been even higher, but the corporation admitted that "higher warranty and recall costs" partially drug things down. For the full year in 2015, FCA expects to ship between 4.8 and 5 million vehicles worldwide and post up to $5 billion in adjusted earnings. There should be about $1.3 billion in net profit, as well. FCA CLOSED Q1 WITH NET REVENUES OF ˆ26.4 BILLION, UP 19% AND ADJUSTED EBIT AT ˆ800 MILLION, UP 22% 30/04/15 FCA closed Q1 with net revenues of ˆ26.4 billion, up 19% and adjusted EBIT at ˆ800 million, up 22%. Net industrial debt was ˆ8.6 billion, up ˆ0.9 billion. Full year guidance confirmed. Worldwide shipments were 1.1 million units, 2% lower than Q1 2014, reflecting strong performance in NAFTA and weak market conditions in LATAM. Jeep's positive performance continued with worldwide shipments up 11% and sales up 22%. Net revenues were up 19% to ˆ26.4 billion (+4% at constant exchange rates, or CER). Adjusted EBIT was ˆ800 million, up ˆ145 million from Q1 2014, with all segments except LATAM posting positive results. The positive impact of foreign exchange translation was offset by negative impacts at a transactional level. Net profit was ˆ92 million, up ˆ265 million compared to the net loss of ˆ173 million in Q1 2014. Net industrial debt was ˆ8.6 billion, up ˆ0.9 billion from year-end mainly due to timing of capital expenditures and working capital seasonality. Liquidity remained strong at ˆ25.2 billion. The Group confirms its full-year guidance.

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Wards names its 2015 10 Best Interiors list

Wards Automotive has named the winners of its 10 Best Interior awards, covering a wide but affordable array of vehicles. Where last year's list contained two six-figure vehicles, including the $372,800 Rolls-Royce Wraith, this year's is, well, a whole lot more reasonable. The publication lists the Mercedes-Benz C400 at $65,000 (which seems off), making it the most expensive vehicle here. That said, we'd argue that the entire C-Class line deserves to make this year's list, owing to its varied and high-quality selection of materials. The other vehicle to break the $60,000 mark, meanwhile, is the $60,675 Ford F-150 King Ranch, which has 327,000 pounds of leather lining its interior. Only one other German car, the BMW i3, and one other pickup truck, the GMC Canyon, managed to make this year's list. Here's the full list of this year's winners: 2014 BMW i3 ($52,550) 2015 Chrysler 300C Platinum ($51,175) 2015 Ford F-150 King Ranch ($60,675) 2015 GMC Canyon SLT ($40,465) 2015 Honda Fit EX-L ($21,590) 2015 Jeep Renegade Limited ($33,205) 2015 Kia Sedona SXL ($43,295) 2016 Mazda6 Grand Touring ($33,395) 2015 Mercedes C400 ($65,000) 2015 Nissan Murano SL ($41,905) See what we mean about the mainstream vehicles? Not only is there a distinct lack of luxury brands, it's the price of some of the vehicles that surprise. The Honda Fit, Jeep Renegade and Mazda6 are very reasonably priced, especially when you compare Wards price with the starting price. The Renegade Limited starts at less than $25,000, the Mazda at less than $22K and the Fit at under $16,000. Head over to Wards for a more detailed explanation of why each vehicle won. Featured Gallery 2015 Ward's Automotive 10 Best Interiors View 10 Photos News Source: Wards Automotive BMW Chrysler Ford GMC Honda Jeep Kia Mazda Mercedes-Benz Nissan Truck Crossover Hatchback Sedan nissan murano gmc canyon Interior jeep renegade WardsAuto kia sedona wards 10 best interiors mercedes c400

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.

Weekly Recap: Lincoln Continental serves up the style, Cadillac CT6 delivers the substance in New York

Lincoln and Cadillac grabbed the spotlight this week at the New York Auto Show in a dramatic fashion that evoked the brands' glory days. America's two luxury carmakers went toe-to-toe with their glittering reveals and plans for ambitious expansion. Both were selling their technology, style and the promise of a better future. Cadillac vs. Lincoln. At the Javits Center, 2015 seemed a lot like 1956. Neither company was interested in drawing comparisons with the other, which is fair, and accurate. They're in vastly different places in terms of sales and the pace of their turnarounds, but they hope to reach the same eventual destination at the pinnacle of the luxury-car world. Lincoln used the element of surprise to great effect with the Continental concept. A production version is still at least a year away, and the company was vague on details. Officially, we don't even know if it is front- or rear-wheel drive, though speculation abounds. Who cares? The seats can be adjusted 30 ways! The Continental also showed off a bold chrome grille that will be the new face of Lincoln. The blue bomber also rolled on blinged-out 21-inch polished aluminum wheels, used a 3.0-liter EcoBoost engine and had huge LED head lights with "laser-assisted" high beams. All of this resulted in almost blinding attention. The concept drew rave reviews, stirred controversy with Bentley designers who argued Lincoln ripped them off, and most importantly, pointed a way forward for the newly determined brand that hopes to compete with Mercedes, BMW, Audi, Cadillac and Lexus. View 32 Photos Meanwhile, Cadillac showed the CT6, a finished product that will top its range and is loaded with the best and latest technologies General Motors has at its disposal. With production starting late this year, Cadillac had more specifics at the ready. Engines? Cadillac has a couple V6s and a turbo four for sure. It's working on a hybrid, and has considered a V-Series variant. It's based on a new rear-wheel-drive, aluminum-intensive chassis called Omega, features an advanced collision-mitigation system with automatic braking and has a cabin that's laden with "leathers, exotic woods and carbon fiber." It will be assembled at GM's Detroit-Hamtramck factory and goes on sale next year. At this point, Cadillac is more than willing to talk about every except for the price. The devil was not in the details for Cadillac, as evidenced by the CT6. But it wasn't for Lincoln either.

Ralph Gilles named Fiat Chrysler head of design

The amalgamation of two major automakers like Fiat and Chrysler inevitably means that there'll be some redundancy. There can't be two design chiefs for the entire group, for example, so the Italian-American automaker has named just one to oversee all design for its various divisions – and that one individual is Ralph Gilles. A Chrysler group veteran, Gilles has been at Auburn Hills since 1992, and has held a number of key positions along the way. He has until now served as senior vice president in charge of what's now known as the FCA North American Design Office – a position he assumed in June 2009 when it was still just the Chrysler design office – and has previously run the Dodge and SRT brands and headed up the company's racing activities. In assuming his new role as the group's Head of Design, Gilles will also step up to the FCA Group Executive Council. Meanwhile Lorenzo Ramaciotti, who joined Fiat as head of design in 2007 after serving the same function at Pininfarina, is now set to retire. Along with the Gilles appointment and Ramaciotti retirement, FCA has named Mauro Fenzi as group COO Systems and head of Comau, Fiat's robotic machinery division. FCA Announces Executive Changes - Appoints Gilles as Chief Designer - Names Fenzi COO Systems and CEO of Comau April 1, 2015 , London - Fiat Chrysler Automobiles N.V. (NYSE: FCAU / MI: FCA) today announced that Ralph Gilles was named Head of Design and member of the FCA Group Executive Council (GEC). He currently leads the FCA North American Design Office as Senior Vice President, a position he was named to in June 2009. The GEC is the highest management-level decision making body within the FCA organization and is led by the FCA Chief Executive Officer (CEO). Gilles succeeds Lorenzo Ramaciotti, who is retiring after several years of dedicated service with the Company. Ramaciotti will continue to lend his expertise to the group serving as a Special Advisor to the CEO. "We extend our sincere appreciation to Lorenzo for his unwavering dedication, service, leadership and many contributions to the organization," said Sergio Marchionne, Chief Executive Officer, Fiat Chrysler Automobiles N.V. Gilles previously served as CEO – Motorsports; President and CEO – SRT Brand and CEO – Dodge Brand for FCA US in addition to his leadership role in Design. He joined the Company in 1992.

Bosch fined $57.8 million by DOJ for price fixing and bid rigging

The US Department of Justice has been investigating bid rigging and price fixing among automotive parts suppliers for years, and so far the agency has leveled nearly $2.5 billion in fines against 34 companies. The latest business to be caught in this ongoing crackdown is Germany's Robert Bosch GmbH (Bosch), the world's largest independent auto component maker, and it agrees to pay a $57.8 million criminal fine to the Feds. According to the DOJ, Bosch has agreed to plead guilty to pricing fixing and bid rigging for spark plugs and oxygen sensors supplied to the former DaimlerChrysler, Ford and General Motors. The rigging is said to have occurred between January 2000 and July 2011. Bosch also allegedly played foul with starter motors sold to Volkswagen from January 2009 until at least June 2010. Bosch and other companies allegedly conspired on the pricing for bids to submit to automakers, and sold the parts at noncompetitive prices. The DOJ filed a one-count felony charge in US District Court for these actions. The company's plea is still subject to court approval, though. Bosch is only the third European company to be charged in this investigation, according to the DOJ. So far, many of the fined businesses have been from Japan, including Takata, NGK and others. Some execs have claimed price-fixing has been the standard operating procedure in the auto parts industry for a long time. Robert Bosch GmbH Agrees to Plead Guilty to Price Fixing and Bid Rigging on Automobile Parts Installed in U.S. Cars Robert Bosch GmbH, the world's largest independent parts supplier to the automotive industry, based in Gerlingen, Germany, has agreed to plead guilty and to pay a $57.8 million criminal fine for its role in a conspiracy to fix prices and rig bids for spark plugs, oxygen sensors and starter motors sold to automobile and internal combustion engine manufacturers in the United States and elsewhere, the Department of Justice announced today. According to the one-count felony charge filed today in the U.S. District Court of the Eastern District of Michigan, Bosch conspired to allocate the supply of, rig bids for, and to fix, stabilize and maintain the prices of, spark plugs and oxygen sensors sold to automobile and internal combustion engine manufacturers such as DaimlerChrysler AG, Ford Motor Company, General Motors Company and Andreas Stihl AG & Co., among others, in the United States and elsewhere.