1966 Chevrolet Chevelle on 2040-cars
North Tazewell, Virginia, United States
I own an auto upholstery and restoration shop, so the car was built to show what we can do. It was built to drive
and not just to be a trailer queen.
The car started out as a regular Malibu convertible and was transformed into the ultimate pro touring car that you
see. The body was in great shape with very little rust. The floors and trunk pans look good so they may have been
replaces at some time. The car was purchased in NC. so it may have been a southern car all of it's life.
Air ride suspension
Shaved door handles and side trim.
396ci. bored 30 over with aluminum heads
Complete rebuilt motor with the best of parts.
The motor has not been dyno tested but I think it has well over 500 hp.
12 bolt / Chevy posi rear with 355 gears
Edelbrock endroshine intake and carb.
4 speed Munci transmission with Hurst shifter
aluminum radiator with electric fan
Vintage air serpentine belt system
Air conditioning
Hooker long tube coated headers
electric exhaust cutouts with 2 1/2 inch exhaust and flow master mufflers
power windows with all new tinted glass
Power custom convertible top
Thunder Road gauges
Custom Leather interior with four bucket seats and the front two swivel ***
Alpine sound system with four speakers and USB port
Foose Wheels
Chevrolet Chevelle for Sale
- 1974 chevrolet chevelle(US $2,900.00)
- 1964 chevrolet chevelle(US $2,900.00)
- 1967 chevrolet chevelle malibu(US $2,800.00)
- 1973 chevrolet chevelle(US $2,900.00)
- 1972 chevrolet chevelle ss clone(US $2,900.00)
- 1967 chevrolet chevelle(US $15,400.00)
Auto Services in Virginia
Wade`s First Stop Auto Repair ★★★★★
Virginia Tire & Auto of Ashburn ★★★★★
The Body Works of VA INC ★★★★★
Superior Transmission Service Inc ★★★★★
Straight Up Automotive Service ★★★★★
Steve`s Towing ★★★★★
Auto blog
GM veteran Bryan Nesbitt tapped to head Buick design
Sat, Jun 6 2015General Motors styling veteran Bryan Nesbitt (pictured above) took over a new role on Monday as executive director of global Buick design and global architectures. Andrew Smith, who previously did that job and also coordinated the look for Cadillac, has remained in charge of the pen at Caddy with this shift. Nesbitt rose to prominence when he designed the Chrysler PT Cruiser, according to Automotive News. He joined GM in 2001 and has been there ever since in multiple high-level roles. In 2007, he was appointed vice president of design for North America and was later briefly general manager of Cadillac in 2009-2010. Nesbitt took over as the vice president of GM's international operations design in China in 2011. This shuffle also moves Ken Parkinson, currently styling boss for Chevrolet trucks, to China as design vice president there. In addition, John Cafaro becomes the person in charge of the look for Chevy globally, rather than previously splitting that role between cars and trucks with Parkinson. GM Global Design Leadership Changes – effective June 1, 2015. Bryan Nesbitt, Design Vice President, GM China will repatriate to North America and assume the position of Executive Director, Global Buick and Global Architectures. He will be located in Warren, MI. Bryan will be the design Champion for Buick in the US and China. Ken Parkinson, Executive Director, Global Chevrolet Trucks and Global Architecture will assume the position of Design Vice President, GM China. He will be based in Shanghai, China. Andrew Smith, Executive Director, Global Cadillac and Buick Design will assume the position of Executive Director, Global Cadillac. He will continue to be the design Champion for the Cadillac brand. In addition, he will continue to lead the Global Color & Trim team. He will be based in Warren, Michigan. John Cafaro, Executive Director, Global Chevrolet Cars will assume the position of Executive Director, Global Chevrolet. He will be the design Champion for Chevrolet. In addition, John will lead the exterior components and accessories team. He will continue to be based in Warren, MI. The roles and responsibilities of Helen Emsley, Mark Adams, Carlos Barba, Clay Dean, Michael Simcoe, and Teckla Rhoades remain the same. Related Video: The video meant to be presented here is no longer available. Sorry for the inconvenience.
2016 Chevy Volt will not need premium gas
Wed, Oct 29 2014Buried in the new technical details of the 2016 Chevy Volt released yesterday was a throwaway line about a small but important change that's due to the new 1.5-liter, four-cylinder engine. The first-gen Volt has always required premium gas but the new powerplant will be happy burning plain old regular. The Volt's chief engineer, Andrew Farah, told AutoblogGreen that the change was due to today's Volt owners explaining they were not happy paying for top-shelf petroleum. "The ability to use regular unleaded was based directly on customer feedback," he said. "Since the range extender is an all-new engine, it was optimized to use regular unleaded at the outset. Using regular fuel will not have effect on vehicle acceleration or other performance factors." As Larry Nitz, GM's executive director of vehicle electrification, told AutoblogGreen yesterday, the new engine is more powerful and quieter than the outgoing 1.4-liter engine that's used in the current Volt. Fuel economy and EV range specs for the next-gen Volt are not expected until the full car is revealed at the Detroit Auto Show in January.
How Chevy Silverado, GMC Sierra will take on the Ford F-150 profit machine
Fri, Aug 10 2018FORT WAYNE, Ind. — When General Motors engineers were developing the 2019 Chevrolet Silverado and GMC Sierra pickup trucks, some of them joined public tours of Ford's Dearborn, Mich., factory to watch aluminum-bodied F-Series trucks go down the assembly line. The redesign of the Ford F-Series trucks, launched in 2014, set a new standard for fuel economy and lightweight vehicle construction. But armed with stopwatches and trained eyes, the GM engineers believed they saw problems. "They had a real hard time getting those doors to fit," Tim Herrick, the executive chief engineer for GM truck programs, told Reuters. His team did more intelligence gathering. They bought and tore apart Ford F-Series doors sold as repair parts. Their conclusion: GM could cut weight in its trucks for a lower cost using doors made of a combination of aluminum and high-strength steel that could be thinner than standard steel, shaving off kilograms in the process. These pounds-and-pennies decisions will have major implications in the highest-stakes game going in Detroit: dominance in the world's most profitable vehicle market, the gasoline-fueled large pickup segment. What's more, GM is banking on strong sales of overhauled 2019 Silverados and GMC Sierras to fund its push into automated and electric vehicles — a business many investors see as the auto industry's long-term future. The risks are high given the hits automakers have taken from U.S. President Donald Trump's trade policies. Rising aluminum prices spurred by Trump's tariffs are driving up costs on the Ford's F-Series, while rising steel and aluminum prices likewise drag on GM results. GM also has a significant risk should the United States, Mexico and Canada fail to agree on a new NAFTA trade deal, given GM trucks built at its Silao, Mexico, factory could face a 25 percent tariff if NAFTA collapses. Major profit per truck Interviews with GM executives and a tour at its factory here in northwest Indiana provide a detailed look inside GM's plan for the most important vehicles in its global lineup. These big pickups are everything Tesla's Model 3 or Chevy's Bolt electric car is not. The mostly steel body is bolted to the truck's steel frame, rather than the one-piece body and frame electric vehicles. The majority of trucks will have a V-8 gasoline engine powering the rear wheels — like the classic GM cars of the 1950s. Some Silverados will have new four-cylinder engines, but there is no electric or hybrid offering as of now.