Chevrolet Cavalier, page #40

Chevrolet Cavalier Price Analytics

About Chevrolet Cavalier

Auto blog

2016 Chevy Camaro to drop 200 pounds

The sixth-generation Chevrolet Camaro makes its grand debut on May 16 at a big celebration on Detroit's Belle Isle. Until then, Chevy's strategy seems to be showing off the pony car's new components piece by piece. With the exhaust headers and front end already on display, the Bowtie is now giving a glimpse at some of the upcoming model's aluminum components. The Camaro is going on a diet for its latest generation, and Chevy claims that the switch to the Alpha platform and other new components shed over 200 pounds compared to the current model. That will put the pony car at around 3,500 pounds. The lower weight will contributes to better fuel economy, quicker acceleration and more direct handling, according to the automaker. Among the changes are aluminum front and rear suspension assemblies (pictured above) that weigh 21 percent less than the current units. Also, Chevy promises in its announcement "links on some models feature an intricate, structurally optimized design made with a rigid composite material that's even lighter than aluminum." In addition to these improved parts, the Camaro uses the lightweight metal for the beam that supports the instrument panel to save 9.7 pounds more. The only two pieces reportedly carrying over to the latest design are Chevy's bowtie and SS badges, and at least one engine in the range is known to be a version of the 6.2-liter LT1 V8. With over a month until the next Camaro's debut, we might get a glimpse of even more of the car's new parts in the coming weeks. Related Video: 2016 Camaro Does More with Less New model is at least 200 pounds lighter than current car 2015-03-30 DETROIT – For the all-new, 2016 Chevrolet Camaro, the team was challenged to improve the handling, acceleration and fuel economy of the award-winning current model. To meet all three objectives, the team focused on a singular mission: reduce mass. By obsessively searching for opportunities to save ounces, the team pared more than 200 pounds off the Camaro compared with the fifth-generation model. As a result, the Camaro does more with less, according to Al Oppenheiser, Camaro chief engineer: "We kept the cornering confidence and control that make the Gen 5 Camaro 1LE so fun to drive, and added a greater sense of agility," he said. "The new Camaro brakes harder, flicks into corners more quickly, and drives out of the corner faster.

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

Weekly Recap: Revisting the BBC report that ended Jeremy Clarkson's Top Gear run

Jeremy Clarkson's long run as a Top Gear host has come to an end, and the reason is clear: His physical assault on one of the show's producers crossed a line, and the government-owned BBC couldn't tolerate it. The incident between Clarkson and Top Gear producer Oisin Tymon was initially described as a "fracas," and Clarkson was suspended. But his popularity and widespread support – even British Prime Minister David Cameron weighed in – suggested that the controversial Clarkson might be given yet another chance. The BBC put this to rest Wednesday when it sacked Clarkson and revealed the findings of its investigation. The report spelled out how Clarkson struck Tymon on the patio of a North Yorkshire (UK) hotel, leaving him with a bloodied, swollen lip. It was severe enough that the producer sought medical treatment. During and after the attack, Clarkson shouted expletives at Tymon and threatened to fire him. The noise carried into the hotel's dining room and even to a bedroom. Local police investigated the incident, but Tymon isn't pressing charges. The huge audience numbers, Clarkson's popularity and the high-octane excitement of Top Gear all melted away in the eyes of BBC director-general Tony Hall, who saw an attacker and a victim. "For me a line has been crossed," he said in a statement. "There cannot be one rule for one and one rule for another dictated by either rank, or public relations and commercial considerations." In that moment, Clarkson was the bad guy, though he was actually the one who reported it to the network and made repeated attempts to apologize to Tymon. He's also urged the media to leave the producer alone. Hall voiced regret in the statement that announced Clarkson's contract would not be renewed, but the BBC decided to move on. Rumors are swirling about possible replacements for Clarkson. The network says it wants to continue Top Gear in 2016 and is looking to air the rest of this season's episodes. Despite the controversy, the show has a global audience of 350 million viewers and is one of the BBC's most valuable properties. It's unclear what Clarkson's co-hosts, James May and Richard Hammond, will do, as their contracts were also reportedly up to be renewed. Other News & Notes 2016 Chevrolet Malibu hybrid charges up with Volt technology Chevrolet is taking some of the learnings and technologies from the 2016 Volt and dropping them into the reborn Malibu hybrid.

'Tomorrowland' movie will advertise Chevy Volt, E-NVs

Before the 2016 Chevrolet Volt arrives at dealerships, it's going to come to a cineplex near you. The next-generation hybrid and the EN-V electric networked vehicle concept will play bit parts in the background of the upcoming Disney movie Tomorrowland starring George Clooney and Britt Robertson. Chevrolet will run digital and television ads around the movie's opening, which is May 22 in the US. The Bowtie and Disney tie-up is another in their years-long collaboration, going back to the revamped Test Track that opened at Epcot Center in 2012, and Chevolet is also the official vehicle of Shanghai Disney. The press release below has more on the movie and the Volt, the movie trailer is above – there's no Volt in it, but there is a late-model Buick. Chevrolet and Disney See Possibilities in 'Tomorrowland' Film to help kick off marketing efforts for next-generation Chevrolet Volt DETROIT, 2015-03-26 – At their core, Disney and Chevrolet are entities of optimism, believing that with a little ingenuity, anything is possible. They will come together in the new Disney film "Tomorrowland" to imagine the possibilities. The all-new 2016 Chevrolet Volt and EN-V concepts appear in the backdrops of the present day and Tomorrowland. The film's U.S. debut is May 22. In Disney's riveting mystery adventure "Tomorrowland," a jaded scientist and an optimistic teen embark on a danger-filled mission to unearth the secrets of an enigmatic place somewhere in time and space. "Tomorrowland is a place where nothing is impossible, which is something that Chevrolet believes can exist in the here and now," said Tim Mahoney, vice president, Global Chevrolet. "The Chevrolet spirit reflects the hopes and possibilities of tomorrow in real instruments of change for today like the next-generation Chevrolet Volt." The first marketing efforts for the 2016 Chevrolet Volt will be tied to Tomorrowland. A television spot and digital advertising will debut in early May. The all-new Volt is an electric car with extended range, showcasing a sleeker, sportier design that offers 50 miles of EV range, greater efficiency and stronger acceleration. The Volt's new, efficient propulsion system will offer an estimated total driving range of more than 400 miles. With regular charging, owners can expect to average more than 1,000 miles between gas fill-ups. Chevrolet and Disney have a long history of collaboration around the globe.

Chevy Malibu will become 45-mpg strong hybrid with next update

Come next year there'll be no more mild hybrid pretensions for the Chevrolet Malibu - the next-generation sedan will borrow technology from the 2016 Volt and get a proper hybrid powertrain. A 1.8-liter four-cylinder engine gets help from a two-motor drive unit adapted from the Volt for 182 system horsepower, the motor drive powered by an 80-cell, 1.5-kWh lithium-ion battery. Chevrolet says that when combined with features like grille shutters and a lower ride height, it expects the Malibu Hybrid will post a combined fuel economy rating of more than 45 miles per gallon, which would best the hybrid trims of the Ford Fusion, Toyota Camry and Hyundai Sonata. Electric power alone can power the car up to 55 miles per hour, and The Bowtie's first use of exhaust gas heat recovery will help maintain high hybrid performance in cold weather and be used to heat the engine and cabin. The Malibu Hybrid should go on sale in the Spring of next year, for now there's a press release below. Chevrolet Malibu Hybrid Derives Technology from Volt GM estimates combined fuel economy ratings to exceed 45 mpg DETROIT, 2015-03-25 – Chevrolet's recent production announcement of its all-electric vehicle based on the Bolt EV concept, as well as the introduction of the 2016 Chevrolet Volt, will be joined by a strong hybrid version of the next-generation Malibu. Using technology from the 2016 Chevrolet Volt propulsion system, Malibu Hybrid will offer an estimated combined fuel economy rating exceeding 45 mpg, higher than the combined mileage ratings of the Ford Fusion, Toyota Camry and Hyundai Sonata hybrid variants. "The 2016 Malibu Hybrid will offer impressive fuel economy, exceptional driving characteristics and gorgeous styling," said Jesse Ortega, Chevrolet Malibu chief engineer. "Besides leveraging innovation from the Chevrolet Volt, the Malibu Hybrid also has unique features that help improve aerodynamics, like upper and lower grille air shutters to improve airflow and a reduced ride height, all of which help reduce fuel consumption," Ortega said. An all-new direct-injection 1.8L 4-cylinder engine mated to a two-motor drive unit slightly modified from the 2016 Chevrolet Volt drive unit powers the Malibu Hybrid. The drive unit provides additional power to assist the engine during acceleration, for 182 horsepower (136 kW) of total system power.

GM to build next-gen Chevy Cruze in Mexico

As one of its global products, General Motors builds the Chevy Cruze for local consumption at assembly plants around the world: in Australia, South Korea, Vietnam, Thailand, China, India, Kazakhstan, Russia, Brazil and Ohio. The automaker is expected to trim those locations for the next generation of its compact sedan, but its latest announcement has it adding a new site to the list: Mexico. As part of a $350-million investment, GM's plant at Ramos Arizpe in Coahuila will gear up for production as one of several sites that will be charged with building the next-gen Cruze. The General has yet to announce just which plants those will be, but it has confirmed that the Lordstown, Ohio, site will once again be among them. The plant in St Petersburg, Russia, which has produced the current Cruze, is being shut down, as is the Holden plant in Elizabeth, Australia. The Ramos Arizpe assembly plant currently puts together the Chevy Sonic and Captiva as well as the Cadillac SRX, but has over the course of its 34-year history handled a variety of models for the Chevy, Pontiac, Buick, Cadillac, Saturn, Opel and even Saab brands. The site handles a quarter of GM's production in Mexico, and exports 87 percent of its capacity to other markets. Invertira GM 350 mdd en Ramos Arizpe para fabricar siguiente generacion de Chevrolet Cruze 2015-03-23 - Se consolida GM de Mexico como el sexto productor global de vehiculos para General Motors Company Ramos Arizpe, Coahuila - General Motors de Mexico anuncio este dia que invertira 350 millones de dolares en su Complejo de Manufactura Ramos Arizpe, para fabricar en estas instalaciones la siguiente generacion del modelo Chevrolet Cruze. "Esta inversion, que forma parte de los 5 mil millones de dolares anunciados en diciembre pasado para todo el pais, fortalecera la presencia de GM Ramos Arizpe en la produccion de nuestra compania a nivel mundial y, por supuesto, consolidara a Mexico como el sexto productor de automoviles para GM Company, con el 7% de la produccion global", informo Ernesto M. Hernandez, Presidente y Director General de GM de Mexico. En una reunion de trabajo en la que participaron Ruben Moreira, Gobernador del Estado de Coahuila y Rogelio Garza, Subsecretario de Industria y Comercio del Gobierno Federal, el Presidente de General Motors en el pais aseguro que el Complejo GM Ramos Arizpe se ha consolidado como un iman para las inversiones de la compania a nivel global. Adicionalmente, Ernesto M.

How easy is it to rebuild a Chevy small block V8?

Chevrolet's famous small block V8 stands as one of the workhorse engines in American auto history, with its variants going into vehicles from hot rods to pickup trucks. But do you know that you can fully disassemble and completely restore one of these mills in just under four minutes? Well, as long as there's some assistance from time-lapse photography, that is. Hagerty created this short clip showing a dirt-covered small block turning from a frog into a prince. Thankfully, the time-lapse doesn't speed the process up too much, and it's still easy to see how all of the principal parts fit together. With all sorts of sensors and software helping to drive the modern automobile, viewing the internal combustion engine in its purely mechanical form is still fascinating. Related Video:

Chevy keeps teasing next Camaro, 70 percent of parts unique to it [w/video]

Opel pulls out of Russia, GM to focus on Cadillac, 'iconic' Chevys

General Motors is going to realign its priorities in the struggling Russian marketplace, withdrawing its Opel brand and pulling out mainstream Chevrolet models. Instead, the General will take aim at Russia's well-established oligarchy, pushing Cadillac as well as "iconic" Chevrolet models, like the Corvette, Camaro and Tahoe. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," GM president Dan Ammann said in a statement. "This decision avoids significant investment into a market that has very challenging long-term prospects." Russian customers interested in an Opel or mainstream Chevys like the Spark, Aveo (the US market Sonic), Cobalt (shown above), Cruze, Orlando and the like have until December to snap up a car before the brands are pulled. "We do not have the appropriate localization level for important vehicles built in Russia and the market environment does not justify a major investment to further localize." Opel Group CEO Karl-Thomas Neumann said. GM will continue to offer service to customers in Russia. "We can assure our customers that we will continue to provide warranty, parts and services for their Chevrolet and Opel vehicles," Neumann said. Beyond realigning its brands in Russia, GM also announced that it would also be idling the company's factory in the country's second-largest city, St. Petersburg. This is the second time the St. Petersburg factory has been in the news – GM announced that it'd be idled for roughly two months back in February. Scroll down for the official press release from GM. GM to Change Business Model in Russia 2015-03-18 Focus on Cadillac and iconic Chevrolet vehicles Wind down Opel brand and sale of mainstream Chevrolet cars Idle GM Auto manufacturing facility in St. Petersburg Part of GM's strategy to ensure long-term sustainability in global markets DETROIT – General Motors today announced plans to change its business model in Russia. GM will focus on the premium segment of the Russian market with Cadillac and U.S.-built iconic Chevrolet products such as the Corvette, Camaro and Tahoe. The Chevrolet brand will minimize its presence in Russia and the Opel brand will leave the market by December 2015. "This change in our business model in Russia is part of our global strategy to ensure long-term sustainability in markets where we operate," said GM President Dan Ammann.

Bring back the Bronco! Trademarks we hope are actually (someday) future car names

Trademark filings are the tea leaves of the auto industry. Read them carefully – and interpret them correctly – and you might be previewing an automaker's future product plans. Yes, they're routinely filed to maintain the rights to an iconic name. And sometimes they're only for toys and clothing. But not always. Sometimes, the truth is right in front of us. The trademark is required because a company actually wants to use the name on a new car. With that in mind, here's a list of intriguing trademark filings we want to see go from paperwork to production reality. Trademark: Bronco Company: Ford Previous Use: The Bronco was a long-running SUV that lived from 1966-1996. It's one of America's original SUVs and was responsible for the increased popularity of the segment. Still, it's best known as O.J. Simpson's would-be getaway car. We think: The Bronco was an icon. Everyone seems to want a Wrangler-fighter – Ford used to have a good one. Enough time has passed that the O.J. police chase isn't the immediate image conjured by the Bronco anymore. Even if we're doing a wish list in no particular order, the Bronco still finds its way to the top. For now (unfortunately), it's just federal paperwork. Rumors on this one can get especially heated. The official word from a Ford spokesman is: "Companies renew trademark filings to maintain ownership and control of the mark, even if it is not currently used. Ford values the iconic Bronco name and history." Trademarks: Aviator, AV8R Company: Ford Previous Use: The Aviator was one of the shortest-run Lincolns ever, lasting for the 2003-2005 model years. It never found the sales success of the Ford Explorer, with which it shared a platform. We Think: The Aviator name no longer fits with Lincoln's naming nomenclature. Too bad, it's better than any other name Lincoln currently uses, save for its former big brother, the Navigator. Perhaps we're barking up the wrong tree, though. Ford has made several customized, aviation themed-Mustangs in the past, including one called the Mustang AV8R in 2008, which had cues from the US Air Force's F-22 Raptor fighter jet. It sold for $500,000 at auction, and the glass roof – which is reminiscent of a fighter jet cockpit – helped Ford popularize the feature. Trademark: EcoBeast Company: Ford Previous Use: None by major carmakers.