2005 Volkswagen Touareg Sport Utility 4-door 4.2l on 2040-cars

Auto blog

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

VW confirms three-row Tiguan to be built in Mexico

Volkswagen has been toying with the idea of a three-row crossover for some time – as evidenced by the CrossBlue concept in 2013 and the Magellan concept way back in 2002. But now the German automaker is bringing it to fruition, and it's doing so right in our back yard (or across the fence, anyway). In its latest announcement, VW confirmed recent reports that it will build a new three-row Tiguan at its plant in Puebla, Mexico. It will be made alongside the Golf and Jetta at the company's largest assembly plant outside of Germany, after a billion-dollar expansion program that will encompass nearly a million more square feet of space and employ some 2,000 workers. Once production of the new Tiguan comes on full steam in 2017, the plant will be pumping out 500 of them every day to be delivered in the Americas, but also exported to markets overseas (save for China and Europe). At that point, VW will be producing 90 percent of its products for North America locally. Of course this won't be the first time Volkswagen will be producing a Tiguan. The current model was introduced in 2007 and underwent a facelift in 2011, but includes only two rows of seating and is imported to North America from factories overseas. VOLKSWAGEN DE MEXICO TO PRODUCE THE NEW THREE-ROW TIGUAN IN ITS PUEBLA ASSEMBLY PLANT Mar 9, 2015 - Investment of $1 billion at Puebla plant - US-CEO Michael Horn: Localization key to safeguard our competitive position - Start of production end of 2016 Puebla/Herndon, March 9, 2015 – Volkswagen de Mexico announced today that a three-row version of the Tiguan will be produced at its plant in Puebla, Mexico. The car will be launched to the markets in 2017. The company will invest $1 billion for the expansion and modernization of its production facilities at the Puebla plant, as well as tooling to produce auto parts at suppliers. Volkswagen de Mexico's strategy of technological upgrading, which started with the production of the new Golf on the Modular Transverse Matrix (MQB) platform, goes to the next step with the new Tiguan. "Localization has become key to safeguarding our competitive position on the global market and manufacturing the Tiguan in Mexico will bring production closer to the U.S.-market," said Michael Horn, president and CEO of Volkswagen Group of America. "It is another proof point that Volkswagen is committed to further growth in the U.S. and North American markets.

VW promises 7-seat CUV for America in 2016

On the eve of the Detroit Auto Show, Volkswagen chief executive Martin Winterkorn has confirmed the imminent arrival of a new crossover. The model, previewed at the same show last year by the CrossBlue concept pictured here, will be unique to the North American market when it arrives here in 2016. The new three-row, seven-seat crossover is part of an ambitious expansion plan on the part of Volkswagen and Audi in North America, where the two brands aim to sell a million vehicles by 2018.
That's a mighty big increase over the 600,000 vehicles which the Volkswagen Group sold here last year, but it's moving in the right direction: That number is already a 100-percent increase of what it sold here just five years ago. At that rate, VW should have little trouble meeting its goals, particularly with the arrival of the new crossover and the introduction of Golf production at its assembly plant in Puebla, Mexico. Read the full statement below for more.