2002 Gray Leather 6 Disk Cd Player Trailer Hitch V8 Dohc 186k Miles on 2040-cars

Auto blog

PSA: Toyota wants to save your life, needs an hour of your time

Toyota wrote Autoblog to ask if we could spread the word about the Takata airbag inflator recall. Defective inflators remain installed in tens of millions of cars made by 19 carmakers, with manufacture dates that go back to the year 2000. Each inflator compounds the risk of serious injury or death in an airbag-activating crash. With a new ad campaign called "in about an hour," Toyota wants to make sure that unaware owners, or overly busy owners, know they can get their Toyota, Lexus, and Scion vehicles repaired free of charge in about the time it takes to do a load of laundry. The campaign focuses on cities in three so-called Zone A states where hot, humid climates worsen the threat of the ruptured inflators: Los Angeles, Dallas, and Miami. However, every owner everywhere who cares about his life, or his child's life, should at least check to see if his car is affected. All it takes is a quick VIN entry at the dedicated recall site at Toyota.com/Recall. The results will let you know if your car is affected and, if so, locate a local dealer for the free fix. The National Highway Transportation Safety Administration said the Takata affair has become "the largest and most complex safety recall in U.S. history." The numbers so far suggest the recall covers more than 42 million vehicles and more than 60 million airbags. Autoweek keeps an updated list of Takata information, including every make and model on the recall list. Consumer Reports published a list of frequently asked questions covering issues directly related and tangential to the recall. The 19 automakers maintain pages dedicated to the issue; Fiat Chrysler lists every relevant model and how it prioritizes repairs by Zone, Honda says it offers a free rental car while owner cars are repaired, Daimler vans says its fix only takes about an hour. And of course NHTSA serves all owners with its own VIN lookup site. We encourage you to check your vehicle — the life you save could be your own. Related Video:

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2014 Toyota Tundra

Raising A White Flag To The Competition
We all benefit from highly competitive battles. In the automotive sector, few campaigns are so closely fought as the decades-long struggle for supremacy in the fullsize half-ton pickup truck segment. The Ford F-150 has dominated for ages, but Chevrolet, Ram and GMC have been closing the gap with freshly redesigned trucks that are rocking the industry.
Today's half-ton trucks are better than they've ever been, and we have fierce competition to thank for that.