2002 Toyota Rav4 Base Sport Utility 4-door 2.0l on 2040-cars

Auto blog

Scion's would-be savior C-HR spied before its Toyota rebadging

Scion is dead, but one of its future products, the C-HR concept, is still in development for launch as a Toyota. Toyota does a thorough job of hiding the C-HR's rakish shape on these test cars, but we can spot the concept's design cues. For example, the pointed nose and narrow headlights are present, and the giant box on the roof can't hide the downward arch for the coupe-like rear. The back doors on these examples look larger than before, which suggests a switch to a traditional five-door body rather than the hidden rear openings on the concept. The change would offer easier access to the backseat and make the C-HR a better competitor in the segment against vehicles like the Honda HR-V, Mazda CX-3, and Jeep Renegade. The C-HR debuted as a boldly styled three-door crossover at the 2014 Paris Motor Show. Toyota later restyled the CUV with a more angular shape and extra doors. We most recently saw the compact crossover with Scion branding at the 2015 Los Angeles Auto Show. Rumors suggest the production model's debut at the Geneva Motor Show in March, and it could arrive at dealers in the latter half of 2016. The powertrain lineup likely consists of a four-cylinder engine with a CVT and possibly a hybrid version, too. You'll also get to see the C-HR on the track because Toyota will race the crossover in the 2016 Nurburgring 24 Hours. Related Video:

Toyota recalling 342k Tacomas due to faulty seatbelt pretensioners

Toyota is voluntarily recalling 342,000 Tacoma Access Cab pickups, produced between 2004 and 2011. The wide-ranging recall is due to faults in the screws that attach the belt pre-tensioner to the belt retractor. There are concerns that the screws can loosen themselves over time, especially if the access door is opened and closed with too much force. It's important to note that the recall only covers the driver and front passenger seat, and is limited to just the Access Cab trucks. Other body styles aren't affected.
If the screws come loose, the pre-tensioner and retractor spring could separate from the belt entirely, which would be bad news in a crash. There's no mention of injuries or accidents due to the faulty pre-tensioners. Owners affected by the recall will be notified soon, and asked to come in for recall service.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.