1988 Toyota Mr2 4 Cyclinder Auto Mid Engine Coupe 92k Miles Nice on 2040-cars

Auto blog

2015 Toyota Yaris to start at $14,845* and look like this

Toyota released a new Yaris in Europe and its Vitz clone in Japan a few months ago, so we knew it would only be a matter of time before it would launch the new hatchback here in North America. And that time has come.
The new, more distinctive 2015 Yaris features far more aggressive exterior styling, a look set apart by that large lower air dam and X-motif front end. It rides on a retuned suspension hooked up to an altogether more rigid chassis, and Toyota promises it will ride more quietly and comfortably than the model it replaces. Inside the new model has additional soft-touch materials in a more comfortable cabin equipped with everything from a 6.1-inch touchscreen display to nine airbags.
The 2015 Yaris comes in both three- and five-door bodystyles, and three trim levels that seek to eliminate the need for options packages. In fact the only option to speak of is a dealer-installed nav system. Power comes from a modest 1.5-liter four with variable valve timing, dual overhead cams and sixteen valves, sending 106 horsepower and 103 pound-feet of torque through either a five-speed manual or four-speed automatic.

Automakers donating money, vehicles and supplies to Oklahoma tornado relief effort

Judging by the destruction the Oklahoma City area experienced earlier this week, residents are going to need a lot of help in coming months. Fortunately, a number of automakers - including General Motors, Ford, Chrysler, Volkswagen, Honda and Toyota - have stepped up to donate money, supplies and vehicles to aid in the recovery and rebuilding processes.
Here's a quick rundown of which automakers have pitched in and what each contributed so far:
Ford Motor Company has donating $250,000 and a Transit Connect to the American Red Cross, and it will match all other donations made to the Red Cross (up to $250,000) using a special URL tied to the latter's website (link here). Additionally, its local Oklahoma dealers have thrown in an extra $150,000 for the United Way and the automaker will be offering an extra $500 toward the purchase of a new Ford vehicle.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.