1987 Toyota Mr 2 on 2040-cars

Auto blog

Toyota finds 10% MPG improvement in hybrid PCU

Keeping up its from-all-angles approach to efficiency, Toyota has found yet another way to eke out up to ten percent more precious MPGs in its hybrid vehicles, this time electronically. The automaker has announced the development of new silicon carbide (SiC) power semiconductors for use in power control units, which it will begin testing on Japanese roads within the next year. The PCU using the silicon carbide compound offers less electrical resistance, which improves efficiency when passing current between the battery and electric motor. It also loses less power after shutting off, and can operate at a higher frequency. The net power loss of the new PCU is just one-tenth of the current silicone-only version (the latter accounting for 20 percent of total electrical power loss in today's hybrids). The result, so far, is a claimed five-percent improvement in fuel economy in test vehicles, with the potential of ten percent by the time the new SiC power semiconductor comes to market. Additionally, the carbide wafers allow for smaller a power module, coil and capacitor, thus allowing the entire PCU to be 80 percent smaller (see the side-by-side comparison in the accompanying photo, which you can click to enlarge). We've got a while to wait before we start to see the carbide technology to start making a real-world impact. Toyota aims to begin using the SiC units in 2020. By then, with improvements in the company's other key efficiency factors - engine technology and aerodynamics - cars like the Prius will likely see significant gains in fuel economy. Read more in the press release below. Toyota Develops 'Diamond-like' Computer Chips to Boost Hybrid Mileage May 20, 2014 Toyota City, Japan – Toyota is using one of the hardest materials in nature after diamonds to develop a semiconductor chip it hopes will improve the fuel efficiency of its hybrids, such as the Prius, by as much at 10 percent. The company and its partners announced today that they have developed a silicon carbide (SiC) power semiconductor for use in automotive power control units. Toyota plans to begin test-driving vehicles with the technology on public roads in Japan within a year. The chips, made from carbide - one of the hardest materials in nature, theoretically have superior characteristics such as one-tenth the electrical power loss and 10 times the drive frequency. Toyota said the chips would also allow it to reduce the size of current automotive power control units by 80 percent.

EPA says automakers ahead of schedule for 54.5 MPG by 2025

Remember, the target is 54.5 miles per gallon by 2025. Today, the CAFE level is a little over 30. How we get from here to there is something the US Environmental Protection Agency (EPA) is monitoring closely. Thus, the EPA just released an annual flash report on how the auto industry is progressing towards meeting the nation's fuel economy goals. Overall, the industry is doing almost 10 grams per mile (equivalent) better than the rules require. The good news is that the industry is a bit ahead of schedule. In the report (see page iii), the EPA breaks things down by automaker based only on MY12 numbers. Tesla is at the top of the list (which is ranked by over-compliance with 2012MY CO2 standards), but for our money, the real leader is Toyota. The Japanese automaker built the second-highest number of vehicles (2,020,248, after General Motors' 2,364,374) but racked up the most net 2012 over-compliance credits (13,163,009 metric tons). That's an average of over 6.5 metric tons per vehicle. The next closest is Honda, with just over five metric tons of credits per vehicle. Given the MPG fiasco with Hyundai and Kia, the EPA says, "we are excluding Hyundai and Kia data because of the ongoing investigation into their testing methods," but overall, the rest of the industry has credits worth 25,053,168 metric tons of CO2, which means it's doing almost 10 grams per mile (equivalent) better than the rules require. Go team. For now, the numbers in this report (and there are a lot more of them – get the 59-page PDF for yourself here), can't really be used to understand everything from the first year of the new CAFE program. The EPA writes, "Because the program allows credits and deficits to be carried into future years, at the close of the 2012 model year no manufacturer is considered to be out of compliance with the program. ... Compliance with the 2012 model year standards can't be fully assessed until the end of the 2015 model year." There are a more interesting tidbits in the report, such as the fact that Fisker produced 1,415 model year 2012 vehicles, Tesla made 2,952. Remember, too, that CAFE numbers don't equal the fuel economy you see in your daily drives. In the real world, the 54.5 CAFE level will be about 40 mpg, and the average fuel economy today is around 25 mpg, so we have a ways to go, no matter how you measure it. EPA Report: Data Show Automakers on Track in meeting Greenhouse Gas Standards WASHINGTON – Today, the U.S.

Toyota prices fuel cell sedan $70K in Japan, coming to US and Europe next summer [w/video]

Toyota has finally unveiled its FCV hydrogen fuel cell sedan and its Japanese price. We won't have to wait too long to see the first of these revolutionary vehicles on the roads. It will go on sale in Japan in April 2015 and will come to the US and Europe later that summer.
In Japan, the FCV will be priced at roughly 7 million yen before taxes ($68,810 at current exchange rates). However, Toyota makes it clear in the press release that we shouldn't try to extrapolate US MSRP from that figure, saying that official pricing for the US and Europe has not yet been determined. As will be the case in the US, sales in Japan will be limited to parts of the country that already have a hydrogen refueling infrastructure (that means you, California).
The production version of the FCV looks almost identical to the concept from last year's Tokyo Motor Show. There is a new vertical strip of LEDs at each corner of the front air intake and real sideview windows, instead of the nubs on the prototype. The weird squiggles from the rear trim are also gone in favor of a more production-ready look, but the taillights survive the changes mostly intact.