Find or Sell Used Cars, Trucks, and SUVs in USA

1978 Toyota Land Cruiser on 2040-cars

US $23,100.00
Year:1978 Mileage:91365 Color: Red /
 Gray
Location:

Sarasota, Florida, United States

Sarasota, Florida, United States
Advertising:

E-Mail Questions at: roseannarttontarski@qprfans.com .

Intro:
For sale is our beloved project "Big Red". A 1978 Toyota FJ43 Land Cruiser, in the rare medium wheelbase. This
acclaimed 4x4 icon underwent a thorough frame off restoration in Colombia. A matching numbers example which was
completely rust free before the restoration, with its original floors, engine, transmission, and chassis. The car
is legally imported and carries a clean and clear Florida title. It will be presented with all import documents
including customs, EPA, DOT, and original bill of sale from factory. This surviving beauty is ready to go back into
its natural habitat. Whether that be climbing rugged mountains, cruising the beach, or driving to the office, you
choose the course and this Land Cruiser will lead!
Restoration:
This FJ43 has its original 4.2L Type 2F inline 6 cylinder engine and 4-speed transmission. We performed extensive
inspections of all mechanical components and they were serviced as needed. The original carburetor was rebuilt and
tuned. All brakes were serviced and pads replaced, fresh fluids changed all around, new battery and alternator were
also installed. Everything works as it should, lights, horn, instrument gauges, etc. New electrical wiring and
harness throughout. To maintain its originality, a list of OEM parts were replaced where possible, some of which
include emblems, lighting, weatherstripping, and more.
The entire frame was stripped down to the bare metal. The paint process was done using high quality PPG paint in
its original Freeborn Red (code 309). The chassis was also stripped and then coated for anti-corrosive purposes.
Although the upholstery was replaced recently by previous owner, we restored and painted all the seat hardware. We
installed a vinyl soft top made to the original measurements with a custom steel frame and ambulance doors. A set
of 5 new OEM steel 15" wheels powder coated and wrapped with new BF Goodrich T/A 31x10.5, all including new OEM
caps.

Auto Services in Florida

Zip Auto Glass Repair ★★★★★

Auto Repair & Service, Windshield Repair, Glass-Auto, Plate, Window, Etc
Address: 4103 S Orlando Dr, Debary
Phone: (877) 659-0818

World Of Auto Tinting Inc ★★★★★

Auto Repair & Service, Window Tinting, Glass Coating & Tinting
Address: 1608 NW 20th St, Biscayne-Park
Phone: (305) 324-0753

Wilson Bimmer Repair ★★★★★

Auto Repair & Service
Address: 1701 Ridgewood Ave, Allandale
Phone: (386) 673-2269

Willy`s Paint And Body Shop Of Miami Inc ★★★★★

Automobile Body Repairing & Painting
Address: 9493 NW 12th St, Village-Of-Palmetto-Bay
Phone: (305) 471-9881

William Wade Auto Repair ★★★★★

Auto Repair & Service, Automobile Electric Service, Engine Rebuilding & Exchange
Address: 2708 NE Waldo Rd, Melrose
Phone: (352) 226-8688

Wheel Innovations & Wheel Repair ★★★★★

Automobile Parts & Supplies, Wheels, Hub Caps
Address: 5920 University Blvd W, Green-Cove-Springs
Phone: (904) 731-0867

Auto blog

2015 Toyota Sienna

Thu, 25 Sep 2014

It's hard to love a minivan, but it's very, very easy to use one. More than any other kind of vehicle - save a panel van, perhaps - the minivan is the most appliance-like of four-wheeled transportation devices. And most minivan buyers don't need to love their purchases; they just need to use them. So when it comes to a minivan's driving dynamics, who cares?
Well, we do. So we perked right up when Toyota talked about refinements it made to the 2015 Sienna, starting with some 142 added spot welds made to the body structure. Normally not stop-the-presses stuff, but Toyota says the added reinforcements prompted Sienna engineers to recalibrate the springs and shocks for improved handling, and our very limited wheel time along the (admittedly benign) roads on the Big Island of Hawaii revealed the 2015 Sienna SE model's handling to be tidier and more engaging than you'd expect for a porky, 4,560-pound, eight-passenger box on wheels.
Driving Notes

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Thu, Sep 11 2014

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Jay Leno goes offroading with the legendary Ivan 'Ironman' Stewart

Mon, 17 Nov 2014

Jay Leno takes a step outside of his cavernous garage for this latest video for a jaunt into the desert to get a little dirty. He meets up with off-road racing legend Ivan 'Ironman' Stewart, who has multiple Baja 500 and 1000 wins in his motorsports career, to play with a Toyota Tundra in the sand.
Unfortunately, Leno doesn't get to interview Stewart too deeply about his long history in racing, but Ironman does talk a little bit about reading the trail while speeding through the desert. In lieu of a great conversation, there is a ton of high-quality footage of the Toyota bounding through the desert.
This clip feels more like a marketing effort than the usual output from Jay Leno's Garage, but it's still great to see Stewart behind the wheel sliding a truck, just like old times. The two of them even take the truck on a somewhat humorous journey at the end of the video.