Toyota Celica Gt on 2040-cars

Auto blog

NHTSA releases updated Takata airbag recalled cars list, but it still has errors

Unfortunately, the government's list still contains errors.
The National Highway Traffic Safety Administration has issued an updated list of vehicle models that it's urging owners to repair under the mushrooming Takata airbag inflator recall. The latest version adds vehicles from new automakers like Subaru and Ford that are missing from the original announcement, and it also removes erroneous entries from General Motors, leaving only the 2005 Saab 9-2X (a reskinned Subaru WRX), and the 2003-2005 Pontiac Vibe, a joint project with Toyota.

Incrementally better than ever | 2017 Toyota 86 First Drive

We'd love to tell you that the incremental upgrades bestowed upon Toyota's rear-wheel-drive coupe as it made its transition from Scion FR-S to Toyota 86 have transformed it into a perfect sportscar. If only a few more horsepower, shorter rear-end gearing, and tiny aero updates were enough to quell all the complaints that enthusiasts have leveled at the machine since the platform first hit the road in 2012, this review would have been so much more satisfying to write. Sadly, that's not the case. Don't get us wrong. The 86 is still extremely fun to toss around a twisty road. The chassis is impressively balanced, the steering is direct, and the shifter is sweet. Sorry to impart upon you this well-worn trope, but the old adage that it's more fun to drive a slow car fast than it is to drive a fast car slow is, in this case, completely accurate. The 2017 Toyota 86 is nothing if not entertaining. But it's not completely new. It hasn't been transformed. It is, in the end, the same as it ever was. It will take about three minutes of your time to watch the videos below, in which we cover pretty much everything that's new for the 2017 Toyota 86. Toyota 86s equipped with manual transmissions get a five-pony boost to 205 horsepower and 156 pound-feet of torque. Automatic models soldier forth with a carryover 2.0-liter four-cylinder that puts out 200 hp and 151 lb-ft. Apparently, more than half of Scion FR-S buyers chose the automatic. That's unfortunate, as it drains a good deal of the fun out of the 86 experience. Choose the manual and you'll be rewarded with an easy clutch and a rewarding short-throw shifter. And, as we said, five more ponies, courtesy of intake and exhaust tweaks and the polishing of some internal engine components. The only upside to the automatic is improved fuel economy of 24 miles per gallon in the city and 32 on the highway. Manual 86s are EPA-rated at 21/28. Along with the small bump in power, the 2017 86 gets a 4.3:1 rear-end gear ratio in lieu of the old 4.1:1 unit. That ought to translate into a small improvement in acceleration that really only matters on paper. In the real world, on actual roads, the difference is negligible. To eke the most out of the 86, you have to constantly work the shifter and keep the engine north of 5,000 rpm. It's still not particularly quick, but it's definitely fun. There's plenty of noise inside the 86, from the wind, the road, and the engine.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.