2007 Toyota Camry Solara on 2040-cars

Auto blog

New drifting world record set in Toyota GT86

We have entered a drifting arms race. Last year, BMW smashed the Guinness World Record for the longest drift by hanging the tail out for 51.3 miles around a wet skid pad in an M5 at the BMW Performance Driving School in South Carolina. That beat the previous milestone of nearly seven miles. Now, Bimmer's record is up in smoke as well and is in the possession of a Toyota.
German driver Harald Müller pummeled the old record to drift for 89.55 miles around a 0.15-mile (235.5-meter) course in Samsun, Turkey, in a Toyota GT86 (or Scion FR-S as it's known in the US). According to the Guinness World Records website, it took him 612 laps and 2 hours, 25 minutes and 18 seconds to manage the achievement. Sit back to watch a few minutes of the German's two and a half hours behind the wheel with the tail out.

Toyota responds to video of Highlander ramming house [w/video]

There are, as they say, two sides to every story, so after we posted a video on Monday showing what an owner claimed to be a case of unintended acceleration causing her Toyota Highlander to crash into a house twice, Toyota reached out to us revealing some additional information about the incident.
Following this crash, which took place back in November, Toyota had this Highlander inspected and pulled data from its Event Data Recorder (EDR), or Black Box as we've come to call it. Not only was this the first time we've seen a claim of unintended acceleration like this caught on video, but now, also a first, we have actual data showing what the vehicle itself recorded during this frightening ordeal.
Brian Lyons, Toyota Communications Manager for Safety and Quality, first gave us some information about the Highlander in question, including the fact that it was a 2012 model. The 2012 Highlander came from the factory with a brake override system, meaning it was not part of the company's initiative in 2010 to add the system to all 2011 models. Also, after looking at the data from the EDR, he said - as many of you pointed out in the comments for the previous post - that the "brake pedal was never touched." In the video, you can see that the crossover's brake lights never come on, and the EDR's data backs this up.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.