2014 Toyota Tundra Sr5 Extended Crew Cab Pickup 4-door 4.6l on 2040-cars

Auto blog

Toyota recalls 209,000 FJ Cruisers over seatbelt issue

Toyota has announced that it will be issuing a substantial recall of the FJ Cruiser for a problem that could cause the front seatbelt retractors to separate from the vehicle body. This recall will apply to all FJ Cruisers - from 2007 through 2013 - totaling around 209,000 units.
The problem stems from the FJ Cruiser's pillarless door opening design that has the front-occupant seatbelts attached to the rear doors. Toyota says that when the rear doors are "repeatedly and forcefully closed," the retractor could completely separate from the door frame.
While there is no information about this recall from the National Highway Traffic Safety Administration yet, Toyota says that there have been no accidents or injuries associated with this issue. No specific fix or recall date are given, but the official press release is posted below.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Weekly Recap: Racing legend Jim Hall explains Chevy's futuristic Chaparral concept

"I said our cars are built to be winners." – Jim Hall Racing legend Jim Hall never thought he'd be a video game consultant, but when Chevrolet asked for his advice to create a futuristic Chaparral for the Vision Gran Turismo series, he was eager to help. He reviewed early sketches and suggested some changes that made it onto the concept, including the addition of a camera that's mounted onto a mast over the cabin to aid the driver. The Chevy Chaparral 2X Vision Gran Turismo concept was revealed this week at the Los Angeles Auto Show and will be part of a downloadable update for PlayStation 3's Gran Turismo 6 in December. Theoretically, at least, it uses a laser-beam propulsion system and an air-powered generator to produce 900 horsepower in the video game. It's capable of sprinting to 60 miles per hour in 1.5 seconds en route to a top speed of 240 mph. Those gaudy performance specs – even in the virtual world – came at Hall's urging. "I said our cars are built to be winners," Hall told Autoblog on the floor of the Los Angeles show. The 79-year-old drove Lotus racecars in Formula One before launching the successful Chaparral Cars in the 1960s. Like his innovative Can-Am racers, the Vision Gran Turismo project has an eye toward the future. It also introduces the iconic Chaparral name to a new generation of fans, and hopefully, Hall says, gets them excited about engineering and design. "It emulates what we did in the '60s," he said. And what they did back then still resonates. Chaparral Racing and Chevy partnered more than 45 years ago for development work on the composite monocoque chassis, lightweight alloy powertrains, automatic gearboxes and active aerodynamics. "He [Hall] walked right back into this and was able to apply thinkings and learnings," said Clay Dean, General Motors executive director of advanced design. The Chevy Chaparral 2X Vision Gran Turismo concept was created at GM's North Hollywood advanced design studio, and it will be on display at the show through November. Other News and Views Sebastian Vettel joins Ferrari team in 2015 Ferrari confirmed that four-time Formula One World Champion Sebastian Vettel will join the Scuderia for the 2015 season, jettisoning Ferrari's current ace, two-time champ Fernando Alonso. Vettel has been F1's most successful driver since Michael Schumacher, though he's struggled to match his previous accomplishments in 2014.