2014 Toyota Tundra Limited on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota reveals new versions of FT-1 concept at Pebble Beach [w/video]

Toyota certainly caught our attention when it unveiled the FT-1 concept at the Detroit Auto Show last January. Coming from the same people who gave us the Lexus LFA, Scion FR-S and Toyota Supra, the FT-1 concept looked striking in its bright red livery. But the Japanese automaker isn't quite done with it yet.
No, we're afraid we don't have a production announcement to share at the moment, but Toyota has revealed two new versions of the FT-1 concept that cast it in different light. Most notable is the graphite version pictured above. Replacing the bright red paintjob and two-tone red and black interior of the original concept, this second iteration - presented in the metal at McCall's Motorworks Revival in Monterey, California - goes for a more upscale and refined graphite exterior and a tan leather interior with exposed metal elements.
Both versions of the virtually road-going FT-1 concept will be playable in GT6, but at the same time Toyota also revealed (in digital form, at least) a virtual racing version of the concept called the FT-1 Vision Gran Turismo. Looking like the original concept was prepared for Japan's Super GT series, the FT-1 Vision GT is retuned for racing, with wider fenders, more extreme aero, competition-spec alloys on slicks and the like.

BMW M850i Coupe, Jeep Wrangler Rubicon and a 1996 Toyota Land Cruiser | Autoblog Podcast #585

In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor Alex Kierstein and Senior Editor, Green, John Snyder. This week, they talk about driving the BMW 8 Series Coupe, Jeep Wrangler Rubicon and Toyota Corolla Hatchback. Then they talk about the news, including electric Hummer rumors and Tesla pickup timing. Finally, they consider whether or not Greg should buy his neighbor's 1996 Toyota Land Cruiser. Autoblog Podcast #585 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Cars we're driving: BMW M850i xDrive Coupe Jeep Wrangler Rubicon Toyota Corolla Hatchback In the news: Is an all-electric Hummer in the works? Tesla pickup truck is on its way Spend My Money: 1996 Toyota Land Cruiser Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: