Manual 2.7l Am/fm Radio Driver Door Bin Dual Front Impact Airbags Skid Plates on 2040-cars

Auto blog

Autocar pits McLaren MP4-12C against turbo Toyota GT86

The Toyota GT86, in all of its forms, is one of the best-handling cars money can buy, a trait that can put a smile on the faces of all but the most jaded car enthusiasts. But if good handling isn't what they're looking for, then what is? Our first guess would have to be more power, something the 200-horsepower Toyota would benefit from. Autocar tries out that theory by driving two turbocharged GT86s on track, then pitting the more powerful one against the 616-hp McLaren MP4-12C in a track battle.
The first GT86 turbo Autocar's Steve Sutcliffe drives makes around 255 rear-wheel horsepower and a bucket-load more torque than the stock car. That's plenty of power to either have a lot of fun or get into a lot of trouble. But the GT86 that Sutcliffe tails in the McLaren is race-prepped, stripped to the bone and wears slicks to harness a heavy-hitting 335 hp at the wheel. Weighing in at under 2,500 pounds, the Toyota can't overcome the MP4-12C's power-to-weight ratio of 5.3 pounds per horsepower, but it comes pretty close.
Enjoy a lot of chasing and drifting fun in the video below!

Toyota finds 10% MPG improvement in hybrid PCU

Keeping up its from-all-angles approach to efficiency, Toyota has found yet another way to eke out up to ten percent more precious MPGs in its hybrid vehicles, this time electronically. The automaker has announced the development of new silicon carbide (SiC) power semiconductors for use in power control units, which it will begin testing on Japanese roads within the next year. The PCU using the silicon carbide compound offers less electrical resistance, which improves efficiency when passing current between the battery and electric motor. It also loses less power after shutting off, and can operate at a higher frequency. The net power loss of the new PCU is just one-tenth of the current silicone-only version (the latter accounting for 20 percent of total electrical power loss in today's hybrids). The result, so far, is a claimed five-percent improvement in fuel economy in test vehicles, with the potential of ten percent by the time the new SiC power semiconductor comes to market. Additionally, the carbide wafers allow for smaller a power module, coil and capacitor, thus allowing the entire PCU to be 80 percent smaller (see the side-by-side comparison in the accompanying photo, which you can click to enlarge). We've got a while to wait before we start to see the carbide technology to start making a real-world impact. Toyota aims to begin using the SiC units in 2020. By then, with improvements in the company's other key efficiency factors - engine technology and aerodynamics - cars like the Prius will likely see significant gains in fuel economy. Read more in the press release below. Toyota Develops 'Diamond-like' Computer Chips to Boost Hybrid Mileage May 20, 2014 Toyota City, Japan – Toyota is using one of the hardest materials in nature after diamonds to develop a semiconductor chip it hopes will improve the fuel efficiency of its hybrids, such as the Prius, by as much at 10 percent. The company and its partners announced today that they have developed a silicon carbide (SiC) power semiconductor for use in automotive power control units. Toyota plans to begin test-driving vehicles with the technology on public roads in Japan within a year. The chips, made from carbide - one of the hardest materials in nature, theoretically have superior characteristics such as one-tenth the electrical power loss and 10 times the drive frequency. Toyota said the chips would also allow it to reduce the size of current automotive power control units by 80 percent.

First Toyota unintended acceleration case headed for trial

Toyota is going to be back in the spotlight, as the first of its unintended acceleration lawsuits is headed for trial. This case covers a Los Angeles sushi shop owner, Noriko Uno. According to the what the family told The Detroit News, Uno only put about 10,000 miles on her 2006 Toyota Camry in four years. Uno was apparently afraid of high speeds, avoiding the freeway and taking a route home along LA's surface streets to avoid them.
On August 28, 2009, Uno's Camry suddenly accelerated to 100 miles per hour, eventually striking a telephone poll and a tree and killing her. The family contends that Uno attempted to step on the brakes and pull the emergency brake, neither of which brought her speed under control, while Toyota maintains that improperly installed floormats and driver error have been behind the majority of the 80 cases expected to be heard in court.
In Uno's case, The Detroit News is expecting the trial to focus on the lack of an override if the gas and brake pedals were pressed at the same time. Brake overrides were installed on Toyota's European fleet. The Uno family attorney will need to prove to the jury that it wasn't driver error that killed Noriko Uno.