1998 Toyota Supra Twin Turbo Hatchback 2-door 3.0l on 2040-cars

Auto blog

Toyota discontinuing FJ Cruiser after 2014 model year

The Toyota FJ Cruiser is not long for this world. According to the manufacturer's own fleet website, the rugged FJ will be discontinued after the 2014 model year, with the companies final orders due in June of next year.
Toyota first launched the FJ Cruiser in 2006 as a 2007 model, and aside from minor year-over-year changes, it has not been substantially updated. The FJ is the modern successor to the original FJ40 Land Cruiser that Toyota produced from the 1960s all the way up through 1984, when the automaker decided to better focus on its larger, four-door Land Cruiser line. Currently, it uses a 4.0-liter V6 engine with either rear- or four-wheel drive, and is available with either a five-speed automatic or six-speed manual transmission. Interestingly, word of the FJ's demise comes not long after Toyota's US boss, Bill Fay, reaffirmed his company's commitment to body-on-frame trucks in late July.
Also of interest, Toyota's fleet website states that the 2014 model year Prius range will have "minor updates," though it's unclear what those are as of this writing. When Autoblog reached out to confirm these developments with Toyota, spokesman Curt McCallister reminded us, "As is our corporate policy, we don't discuss future products beyond the present or upcoming model year."

Vehicles awarded IIHS Top Safety Pick awards skyrockets for 2015 [w/video]

By practically every measure, passenger vehicles in the US are continuing to get safer. With the year rapidly coming to an end, the Insurance Institute for Highway Safety is releasing its annual list tallying of the scores for the latest vehicles to see how they compare to last year. Judging by the agency's evaluations, the numbers look quite positive. According to the institute, 71 vehicles earned either the Top Safety Pick or Top Safety Pick+ rating so far in its testing for 2015. Among the latest winners, there have been 33 TSP+ awards and 38 TSP medalists. That's a healthy increase over the 22 TSP+ and 17 TSP grades in 2014. The figures appear even more impressive when you consider that it keeps getting harder to earn the + designation. In the latest round of testing, a vehicle must offer some form of front crash prevention automatic braking to get the mark. Previously, just a warning to drivers was necessary. This list also illustrates the ways that automakers adapt to new testing procedures. In 2013 there were 117 TSP ratings and 13 TSP+ awards. Then, the IIHS mandated that to be a safety pick, a model had to score Good in the institute's four crash tests, plus a Good or Acceptable in the small overlap front test. That brought a plunge in 2014 to just 17 TSP grades. With the numbers climbing again, companies apparently have deciphered how to perform better. Some brands especially stood out on this year's list. The IIHS praised Volvo, Mercedes-Benz and Acura for offering standard front crash prevention systems on some models. Subaru received at least one of the awards for all seven of its models. Toyota also had seven, and the Honda brand did too – though the institute counts the two- and four-door versions of the Civic and Accord separately. Check out the full announcement below and a video about this year's winners. The full list can be viewed, here. Safety gains ground: More vehicles earn top honors from IIHS The number of vehicles earning either of the Institute's two awards has jumped to 71 from 39 this time last year, giving consumers more choices for optimum protection in crashes. The number of winners in the top tier - TOP SAFETY PICK+ - has increased by 11 for 2015, despite a tougher standard for front crash prevention. "This is the third year in a row that we are giving automakers a tougher challenge to meet," says IIHS President Adrian Lund.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.