2006 Toyota Sienna Le Awd 18k Miles Only on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota FV2 Concept is a single-seat mood ring for the road

Of all the vehicles Toyota brought to the Tokyo Motor Show, the FV2 might be the most creative. The minimalist single-seat concept is a glimpse at Toyota's idea of a "fun to drive" vehicle in the future.
The FV2 is essentially a pod with a diamond-shaped wheel array (what powers said wheels has not been disclosed), and Toyota says that the technology of the vehicle allows it to gauge the driver's mood and suggest possible destinations. The interaction between driver and vehicle is also displayed in an augmented reality screen on the windshield, and the car can also act as a mood ring of sorts with exterior colors and patterns that can change based on the driver's mood. We can just see it now: "Don't mess with Jim today, his car is red."
Scroll down for a brief press release on the FV2.

Toyota to ramp up Tacoma production in Mexico by 41%

The Toyota Tacoma may be getting on in age, but that isn't stopping the Japanese manufacturer from ramping up production at the pickup's Baja California factory. The Mexican plant will soon be home to another 300 jobs as it increases total capacity by 41 percent. The increase is slated for April 2015.
The move is a curious one, considering the Tacoma's age and the fact that General Motors is preparing what, on the surface, appear to be two very competent challengers. The factory increase could be in preparation for the 2016 Taco (spy photos shown above), which is expected to represent a significant overhaul of the long-serving truck.
Toyota's decision to increase capacity could also be due to the factory building freeze implemented by President Akio Toyoda, according to Automotive News. Toyoda put a hold on new factories until 2016, asking executives to squeeze as much production as possible out of remaining factories before bringing any additional facilities online.