Sr5 Suv 4.7l Cd 4x4 Traction Control Tires - Front On/off Road Steel Wheels Abs on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Toyota says freezing temps pose zero problems for fuel cell vehicles

Hydrogen-powered fuel cell electric vehicles are not afraid of one thing – freezing cold weather. That's the latest from two companies that have been driving the cars in frostbite temperatures in the Northeast recently. Proton Onsite runs a fleet of 10 Toyota FCHV-adv fuel cell vehicles out of its Connecticut headquarters and discovered that the snow and three-degree temperature didn't restrict range. Mark Schiller, Proton vice president of business development, said in a statement that, "I went out to my Toyota FCHV-adv and brushed off a foot of snow before starting the car right up. No problem." While electric vehicles can have their driving range reduced in extreme temperatures (but not always), Proton Onsite hasn't seen that happen in the Polar Vortex. They're performing flawlessly in freezing temperatures even with the heaters blasting, and are continuing to hit their range of about 300 miles, Schiller said. Air Products, based on Allentown, PA, has had a similar experience. The FCHV-adv has had great performance under harsh conditions, according to Nick Mittica, commercial manager, hydrogen energy systems. Employees drove the fuel cell vehicle during one of Pennsylvania's worst winters in recent memory and, you guessed it, "No problem." Toyota says that has put its fuel cell fleet through the wringer, logging millions of miles over the last decade, to make sure performance can be delivered within extreme weather conditions. Toyota engineers spent weeks testing cold weather start up, performance and durability up in Yellowknife, Canada. Temperature can reach -30 degrees Celsius (-22 degrees Fahrenheit) at that location. On other end of the scale, Toyota was able to verify that its FCVs can handle driving through heat in Death Valley national park. We heard the same from Mercedes the other day, too. Extreme weather functionality is apparently something automakers want to make absolutely sure the public doesn't worry about. Jan. 30, 2014 – Record low temperatures have stranded many East Coast drivers, but not those driving a Toyota fuel cell hybrid vehicle. Connecticut-based Proton Onsite, which operates a fleet of ten Toyota FCHV-adv fuel cell vehicles, says that even in single digit temperatures, the FCHV-adv shows no signs of frostbite. "We had another snow storm Tuesday night and this morning the temperature was 3 degrees," says Mark Schiller, Proton vice president of business development.

Subprime financing on the rise in new car sales, leasing too

We all remember the financial crisis that began several years back. At its core was a splurge of subprime lending for housing loans. The housing bubble burst, triggering a collapse of the mortgage-backed securities market. Apparently, those types of loans still exist in the automotive industry, and the market share for these types of "nonprime, subprime, and deep subprime," loans has grown 13.6 percent compared to the third quarter a year ago.
According to an Automotive News report, high-risk lending expanded to 24.8 percent of total loans in Q3, up from 21.9 percent for this time last year. As this level increased, average credit scores of borrowers dropped to 755, down from 763 a year ago. In that time, the average financing amount increased $90 per vehicle, to $25,963.
At 818, Volvo maintains the highest per-owner credit score, while Mitsubishi has the lowest, at 694. The highest rate of borrowers was at Toyota, with 14 percent of the market, followed by Ford with 13.1 percent and Chevrolet at 11.1.