2011 Toyota Sequoia Sr5 Sport Utility 4-door 4.6l on 2040-cars

Auto blog

2014 Toyota FJ Cruiser Ultimate Edition

Introduced at the end of 2006, this is the last year for the Toyota FJ Cruiser, the reincarnated FJ40-series Land Cruiser that will shortly journey to Takama-ga-hara, the Plain of High Heaven. In its first model year, we drove it to SEMA and found it, shall we say, coarse. It bobbled on the freeway and droned in the cabin, its boxy interior providing four bounce-boards for unpleasant frequencies. Tall mirrors helped one work around the eclipse of vision aft of the B-pillars, but navigating traffic required forethought and technique. Its turning circle was measured in kilometers. For the first two years of its life, it needed premium gas. It may have been fun to look at, but we couldn't wait to get out of it.
That's not the case anymore, and now the FJ Cruiser is poised to join a long list of vehicles that got better and better, then got axed.
Driving Notes

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

2015 Toyota Camry Hybrid

Toyota offers many flavors of its refreshed 2015 Camry, but those who choose to lower their operating cost-per-mile, squeeze 500-plus miles out of each tank of fuel or run a very efficient and reliable sedan in their taxi fleets will only be interested in one: the Camry Hybrid.
The exterior of the 2015 Camry Hybrid is nearly indistinguishable from its gasoline-only counterparts, with the same all-new sheetmetal and bumpers. The Hybrid is offered in LE, SE and XLE trims, meaning customers are offered base, sport or luxury configurations, respectively.
While Toyota expended quite a bit of effort resculpting and improving the 2015 Camry Hybrid, one area it didn't touch was the powertrain - it is virtually identical to last year's model (just like the gas version). Under the hood is a 2.5-liter Atkinson cycle four-cylinder gasoline engine (156 horsepower and 156 pound-feet of torque) and an electric tractive motor (141 horsepower and 199 pound-feet of torque). Combined, and running through Toyota's unique Hybrid Synergy Drive electronic continuously variable transmission, the two produce 200 horsepower (Toyota does not list a combined torque figure, and we've asked for clarification). A 1.6 kilowatt-hour nickel-metal-hydride battery, packaged behind the rear seats, provides energy storage.