2001 Toyota on 2040-cars

Auto blog

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.

Hi-po Toyota GT86 to get KERS?

We happen to like the Toyota GT86 - and, it of course goes without saying that the same applies to the Subaru BRZ and Scion FR-S, as well - just the way it is. Yes, that includes the standard 2.0-liter four-cylinder boxer engine and its 200 horsepower at 7,000 rpm.
That said, a little extra power never hurt anybody, right?
The most obvious way to add some punch to the GT86 would be with a turbocharger, and that has indeed long been rumored for an STI version of the BRZ. Will Toyota follow suit? According to Top Gear, the answer is no. Says GT86 chief engineer Tetsuya Tada, "I think 300bhp with a turbo and 200g/km of CO2 would be tasteless in this day and age. And a turbo would mean the loss of the GT86's uniqueness." Perhaps a bit harsh, but there you go.

Watch a Camry driver in full road rage

There are vehicles that, fair or not, will forever be associated with jerky drivers. But as this very recent footage from an in-car camera shows, even the most mundane of sedans can be piloted by an ass.
In this video, the driver of one very beige Toyota Camry is driving like a person choked with rage. Though we don't see which (if any) actions by our camera car might have lead up to the tirade, we do see the Camry driver swerving from lane to lane, in multiple attempts to get in front of and brake check the couple in the recording.
According to the text associated with the YouTube video, the offending incident took place last week, on a section of I-880 near Fremont, CA. The uploader has gone so far as to include the date, time and license plate number of the Camry driver, in hopes, we guess, that some kind of legal action can be taken against him. Take a closer look for yourself in the video below.