Toyota Land Cruiser Fj40 on 2040-cars

Auto blog

Toyota recalling 1.9M Prius models globally for software update

Toyota has announced a set of voluntary recalls covering 960,000 Prius, RAV4, Tacoma and Lexus RX350 models in the United States to address two separate issues. Worldwide, Toyota will have to recall a total of 1.9 million Prius cars.
The Prius recall affects about 700,000 2010-2014 models in the US, due to a fault in the motor/generator control ECU and hybrid control ECU software. It says that the current software could result in high temperatures on certain transistors and possibly damage them. When it fails, the error forces the car into failsafe mode. Toyota says that in rare circumstances, it could even shut the hybrid system down while the car is being driven.
Toyota spokeswoman Shino Yamada told Automotive News that the software update should take about 40 minutes, and dealers would start to be notified about affected vehicles today. She also told them that the first reported glitch occurred in May 2011 in the US when the system overheated and the car entered failsafe mode. The affected cars were built between March 2009 and Feb. 5, 2014, according to Automotive News. Toyota says that it has received no reports of accidents or injuries caused by either fault.

Toyota confirms C-HR crossover to debut at Geneva

With the compact crossover segment booming with new entries, Toyota soon intends to burst into the popular market with a production version of the C-HR concept. The rakishly styled, little CUV will show off its final face at the 2016 Geneva Motor Show next March, and European sales will start before summer, Autocar reports. Customers in the US will likely get to drive the angular model, too. The C-HR concept's chiseled shape is expected to make the transition to the road largely unaltered. According to Autocar, customers reportedly really dig the razor-sharp look versus a more conventional CUV design. A hybrid is also expected to be included in the production powertrain lineup, but non-electrified options could be available, too. The Japanese automaker last displayed the C-HR at this year's Frankfurt Motor Show. Underneath the avant-garde shape, the Toyota New Global Architecture provided the underpinnings, and a hybrid powertrain was there for propulsion. The concept's general design idea was actually the revival of a three-door crossover from the 2014 Paris Motor Show. In addition, the production C-HR is expected eventually to arrive in the US but likely wearing a Scion badge. Spy shots highly suggest that a crossover is already under development, and the entry would give the division a much-needed challenger to the Nissan Juke, Honda HR-V, Mazda CX-3, and plenty of others. Plus, the brand is keeping it absolutely no secret that a third, new model is on way to join the iA and iM.

How Toyota's 100-year textile history influenced FCV hydrogen fuel cell car

Turns out, Toyota had a surprising ace in the hole when it came to building the new fuel tanks for the FCV hydrogen fuel cell car, which is coming next year. Well before Toyota became the Toyota Motor Company, it was the Toyota Industries Corporation and it made textile looms. This is important because the main structure of the hydrogen tank is wound carbon fiber. When Toyota set out to increase the strength of the tanks to hold hydrogen stored at 10,000 psi (up from 5,000 in the previous tanks), it was able to draw on its 100-year-old history as it designed its car of the future. "A lot of that textile experience came back when we did the tank wrapping." – Justin Ward "We have a lot of experience with textiles," Justin Ward told AutoblogGreen at the 21st World Congress on Intelligent Transport Systems (ITS) in Detroit this week, "and a lot of that textile experience came back when we did the tank wrapping." On top of being able to hold the higher-pressure hydrogen, Toyota's first attempt to build its own hydrogen tank was six times faster than the industry standard, so it saved time and money as well as working better. The company will also be able to inspect its own tanks. Ward is the general manager of powertrain system control at the Toyota Technical Center and hydrogen vehicles are something he knows a lot about. The reason for the stronger, 10,000-psi tanks is because the 5,000-psi tanks only offered around 180-200 miles of range, even with four tanks in the early $129,000 FCHV Highlander hydrogen prototypes. The FCV only has two, but they will able to deliver the 300-mile range that customers told Toyota they wanted. Dropping the number of tanks not only obviously reduced the cost for the tanks themselves but also the number of valves and hoses and other components you need. Despite the benefits of higher compression, going much higher doesn't make sense. 10,000 psi is the "natural progression," Ward said, because "you start to bump up against compression inefficiencies." Think of an air compressor. When hydrogen is produced at a wastewater treatment plant or a reforming site, Ward said, is it at around ambient pressure (14 psi). That has to be raised, using compressors, all the way to 10,000 psi. "That takes energy," Ward said, "and every doubling of pressure adds another doubling of energy needed, so it starts to add up pretty fast if you go too high." Component specifications are also fine at 10,00 psi, but more difficult at higher levels.